莱州湾东岸沿岸输沙率及冲淤演化动态分析

采用美国<海岸防护手册>的CERC公式对莱州湾东岸的沿岸输沙率进行计算;同时根据莱州湾东岸自身特征,采用岬间海湾平面平衡形态经验模型-抛物线模型对莱州湾东岸的平衡状态进行预测,结合两者分析得出莱州湾东岸的冲淤演化动态:屺姆岛南侧西端略有冲刷;龙口湾顶基本无泥沙进出;招远岸段遭受严重的侵蚀;石虎咀处于淤积状态.针对侵蚀岸段提出了防止海岸蚀退的对策.     

围填海工程对莱州湾水动力条件的影响

本文采用数值模拟的方法研究了2003—2013年10年来围填海工程建设对莱州湾水动力环境的影响。结果表明2003—2013年围填海工程的建设导致了莱州湾海域面积减小7.38%;围填海工程使莱州湾流速整体呈减小趋势,流速减小超过4cm/s面积约占整个海湾面积的24.3%,流速增加大于4cm/s区域仅占4.0%,流向变化整体较小;莱州湾的纳潮量明显减小,平均纳潮量减小了5.57%;围填海工程建设使莱州湾水交换率略有减小。围填海工程弱化了莱州湾的海湾属性。     

龙口湾的开发利用与保护

探讨了龙口湾的开发功能、利用和保护问题，认为龙口湾的最重要功能是港口建设，同时应兼顾其他方面的发展；还指出在海湾开发的同时，应加强对海湾和沿岸土地的管理与保护。     

2005/2006年度莱州湾东部的海冰灾害及其影响

莱州湾是水深较浅的半封闭海湾,与外海海水的交换缓慢,受黄河等十几条入海河流汇入的淡水影响使海水的盐度较低.受寒潮影响莱州湾内海冰灾害发生频繁.莱州湾的海冰灾害分5个冰情等级.在冬季气温偏高的年份,莱州湾内形成Ⅰ、Ⅱ级海冰,沿岸一般没有固定冰形成;一般年份形成Ⅲ级海冰,西岸和南岸冰情较严重,有固定冰形成;在冬季气温偏低的年份,形成Ⅳ级或Ⅴ级海冰,南岸、西岸的固定冰宽度较大,有时整个莱州湾海面都分布流冰.2005年末～2006年初在莱州湾东岸形成了一次较严重的海冰灾害,莱州市近海海湾扇贝养殖的经济损失达400万元以上.为减轻未来海冰灾害带来的损失提出了加强海冰灾害的监测和预报技术研究,严格管理近海养殖生产作业,莱州湾沿岸地方政府应制定<海冰灾害应急预案>,建设和完善海冰灾害应急防御体系等防御海冰灾害的对策.     

莱州湾海洋渔业现状

莱州湾位于渤海南部山东半岛的北侧，海湾面积６９６６ｋｍ＾２，海岸线长３１９．０６ｋｍ，是渤海内三大海湾之一，是山东省的最大海湾，是我国北方的重要渔场之一。了解莱州湾海洋渔业现状，对于“海上山东”建设和今后正确引导黄渤海渔业资源的保护与开发都是十分必要的。     

龙口港增水极值预报方法的初步探讨

一、概 况 龙口港位于莱州湾东岸,是山东省的一个比较重要的客货运港口。沿海地形平坦,北部水深较浅,属不正规半日潮港。因莱州湾开口东北向,故每当渤海海面出现东北大风时龙口地区易出现增水。同时,由于港口北侧横一东西走向的臂状半岛——屺姆岛。使港湾开口向西,如遇东北大风急转偏西向风,亦易形成海水倒灌。因此,研究龙口港风暴潮生成机制及一般特征,给出预报方法就显得特别重要。     

龙口湾大振幅假潮形成的数值模拟

龙口湾是出现假潮比较显著的海湾之一,据统计1972-1981年间,平均每年出现6次40cm以上的振动,1980年9月1日观测到水位振动的最大振幅达293cm,同日的气压波也有7个hPa的起伏.本文用数值模拟的方法,初步探讨了气压扰动和在龙口湾1980年9月1日观测到的假潮之间的定量关系,证实了在龙口湾中出现的大振幅假潮的确是由于移动气压波扰动激起湾外长波,传入湾内发生共振所导致的.直接由气压波扰动很难导致大振幅假潮的发生.     

莱州湾污染严重

莱州湾西起东营市神仙沟口,东至龙口市屺(山母)岛,海湾总面积约6400平方公里。莱州湾的生物资源丰富,种类繁多,分布回游的渔业种类有260余种,较重要的经济鱼类和无脊椎动物近80种。但由于近些年沿海工业的发展,排污量增加,海     

污着生物对莱州湾海湾扇贝养殖的危害及防除研究

海湾扇贝在我国北方沿海自２０世纪８０年代引进以来,已形成规模化生产。本文将通过多年养殖实践着重讨论海洋污着生物对莱州市金城镇海湾扇贝养殖的危害及对策,并介绍一些有效的防除方法。１海湾扇贝养殖网笼上的污着生物的基本情况及危害莱州湾在１９８６年开始试养海湾扇贝,     

渤海莱州湾滨海平原晚第四纪地质事件与古环境

莱州湾为渤海三大海湾之一,西面及南面均为滨海平原,是华北平原的组成部分。莱州湾滨海平原在山东低山丘陵与莱州湾之间 莱州湾滨海平原第四纪古地理环境的调查研究始于50年代,60年代以来,随着地下水资源和油气的开发,第四纪地层与沉积环境的研究开始深化。作者自70年代以来，在本区开展了第四纪地下卤水资源、海平面変化与地下咸水入侵等问题的研究，以上研究均以第四纪古地理环境为宏观背景。本文系上述研究结果的阶段总结,为今后本领域研究工作与资源开发、环境保护等方面提供了依据。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.