共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
《机械工程与自动化》2017,(4)
目前常规螺杆泵定子的加工方法是在圆柱形钢管内壁浇铸橡胶,使其形成螺旋曲面的内表面。这种方法得到的橡胶薄厚不均,致使螺杆泵定子的寿命、工作性能、适用范围及效益不能很好地满足市场要求。针对这一问题,对螺杆泵定子曲线进行分析,得到满足密封性要求的螺杆泵线型方程和曲面方程,在分析得到加工内螺旋曲面方法的基础上,制定了其基本的加工方案。 相似文献
4.
5.
6.
内螺旋齿面非典型成形铣削方法及应用技术研究 总被引:1,自引:0,他引:1
针对具有大导程、偶数头、光滑连续特点的螺杆钻具马达定子细长螺旋内齿面,提出了一种用成形盘状铣刀对称、连续铣削的成形方法,阐述了成形方法的特征。研究了在特定的切削运动约束条件下,刀具与工件理论齿面的干涉条件判定方法。通过切削试验,验证了此加工技术应用于螺杆钻具马达定子、螺杆泵定子内螺旋曲面加工的可行性。 相似文献
7.
《机械工程与自动化》2015,(5)
传统螺杆泵定子由丁腈橡胶浇铸钢筒而成,衬套内表面为螺旋曲面,所以薄厚不均,影响螺杆泵运行性能及使用寿命。而挤压成形的定子管内表面为螺旋形,可以使用等厚的衬套,且挤压效率远高于切削,因此不但改善了螺杆泵的性能,而且提高了其生产效率和使用寿命。建立六头螺杆定子挤压成形的有限元模型,用有限元分析软件对加工过程进行仿真模拟,得出进给速度、挤压深度对所加工螺杆导程及使用推力的影响,为使用挤压法制造多头螺杆定子提供参考和依据。 相似文献
8.
9.
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
14.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
15.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
16.
17.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
18.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献