Copper-catalyzed chlorination and condensation of acetylene and dichloroacetylene

The chlorination and condensation of acetylene at low temperatures is demonstrated using copper chlorides as chlorinated agents coated to model borosilicate surfaces. Experiments with and without both a chlorine source and borosilicate surfaces indicate the absence of gas-phase and gas-surface reactions. Chlorination and condensation occur only in the presence of the copper catalyst. C₂ through C₈ organic products were observed in the effluent; PCDD/F were only observed from extraction of the borosilicate surfaces. A global reaction model is proposed that is consistent with the observed product distributions. Similar experiments with dichloroacetylene indicate greater reactivity in the absence of the copper catalyst. Reaction is observed in the gas-phase and in the presence of borosilicate surfaces at low temperatures. The formation of hexachlorobenzene is only observed in the presence of a copper catalyst. PCDD/F were only observed from extraction of the borosilicate surfaces. A global reaction model is proposed for the formation of hexachlorobenzene from dichloroacetylene.     

Air Pollution and Mortality: Issues and Uncertainties

Abstract

Results from 31 epidemiology studies linking air pollution with premature mortality are compared and synthesized. Consistent positive associations between mortality and various measures of air pollution have been shown within each of two fundamentally different types of regression studies and in many variations within these basic types; this is extremely unlikely to have occurred by chance. In this paper, the measure of risk used is the elasticity, which is a dimensionless regression coefficient defined as the percentage change in the dependent variable associated with a 1% change in an independent variable, evaluated at the means. This metric has the advantage of independence from measurement units and averaging times, and is thus suitable for comparisons within and between studies involving different pollutants. Two basic types of studies are considered: time-series studies involving daily perturbations, and cross-sectional studies involving longer-term spatial gradients. The latter include prospective studies of differences in individual survival rates in different locations and studies of the differences in annual mortality rates for various communities.

For a given data set, time-series regression results will vary according to the seasonal adjustment method used, the covariates included, and the lag structure assumed. The results from both types of cross-sectional regressions are highly dependent on the methods used to control for socioeconomic and personal lifestyle factors and on data quality. Amajor issue for all of these studies is that of partitioning the response among collinear pollution and weather variables. Previous studies showed that the variable with the least exposure measurement error may be favored in multiple regressions; assigning precise numerical results to a single pollutant is not possible under these circumstances. We found that the mean overall elasticity as obtained from timeseries studies for mortality with respect to various air pollutants entered jointly was about 0.048, with a range from 0.01 to 0.12. This implies that about 5% of daily mortality is associated with air pollution, on average. The corresponding values from population-based cross-sectional studies were similar in magnitude, but the results from the three recent prospective studies varied from zero to about five times as much. Long-term responses in excess of short-term responses might be interpreted as showing the existence of chronic effects, but the uncertainties inherent in both types of studies make such an interpretation problematic.     

Gas production and migration in landfills and geological materials.

Landfill gas, originating from the anaerobic biodegradation of the organic content of waste, consists mainly of methane and carbon dioxide, with traces of volatile organic compounds. Pressure, concentration and temperature gradients that develop within the landfill result in gas emissions to the atmosphere and in lateral migration through the surrounding soils. Environmental and safety issues associated with the landfill gas require control of off-site gas migration. The numerical model TOUGH2-LGM (Transport of Unsaturated Groundwater and Heat-Landfill Gas Migration) has been developed to simulate landfill gas production and migration processes within and beyond landfill boundaries. The model is derived from the general non-isothermal multiphase flow simulator TOUGH2, to which a new equation of state module is added. It simulates the migration of five components in partially saturated media: four fluid components (water, atmospheric air, methane and carbon dioxide) and one energy component (heat). The four fluid components are present in both the gas and liquid phases. The model incorporates gas-liquid partitioning of all fluid components by means of dissolution and volatilization. In addition to advection in the gas and liquid phase, multi-component diffusion is simulated in the gas phase. The landfill gas production rate is proportional to the organic substrate and is modeled as an exponentially decreasing function of time. The model is applied to the Montreal's CESM landfill site, which is located in a former limestone rock quarry. Existing data were used to characterize hydraulic properties of the waste and the limestone. Gas recovery data at the site were used to define the gas production model. Simulations in one and two dimensions are presented to investigate gas production and migration in the landfill, and in the surrounding limestone. The effects of a gas recovery well and landfill cover on gas migration are also discussed.     

Uncertainties and recommendations

An assessment of the impacts of changes in climate and UV-B radiation on Arctic terrestrial ecosystems, made within the Arctic Climate Impacts Assessment (ACIA), highlighted the profound implications of projected warming in particular for future ecosystem services, biodiversity and feedbacks to climate. However, although our current understanding of ecological processes and changes driven by climate and UV-B is strong in some geographical areas and in some disciplines, it is weak in others. Even though recently the strength of our predictions has increased dramatically with increased research effort in the Arctic and the introduction of new technologies, our current understanding is still constrained by various uncertainties. The assessment is based on a range of approaches that each have uncertainties, and on data sets that are often far from complete. Uncertainties arise from methodologies and conceptual frameworks, from unpredictable surprises, from lack of validation of models, and from the use of particular scenarios, rather than predictions, of future greenhouse gas emissions and climates. Recommendations to reduce the uncertainties are wide-ranging and relate to all disciplines within the assessment. However, a repeated theme is the critical importance of achieving an adequate spatial and long-term coverage of experiments, observations and monitoring of environmental changes and their impacts throughout the sparsely populated and remote region that is the Arctic.     

Plant uptake and transport models for neutral and ionic chemicals

BACKGROUND: Models for predicting uptake and transport of chemicals in plants are applied in pesticide design, risk assessment, and environmental biotechnology. OBJECTIVE: This review considers the theoretical basics of the most popular models, and discusses what they have in common. The line is drawn between models for neutral compounds, and models for weak and strong electrolytes. MAIN FEATURES: Neutral Compounds. Neutral compounds undergo only very few processes inside plants (lipophilic interactions, metabolism), in contrast to weak electrolytes. The models developed for neutral compounds are widely applied in the risk assessment of environmental contaminants, but are not of much use for weak electrolytes, such as pesticides. Weak electrolytes. A very important process for weak electrolytes is the 'ion trap', which traps chemicals that dissociate inside plant cells. This is considered in the popular models of Kleier, Satchivi and Briggs. Other relevant processes for electrolytes are electrophilic interactions, speciation and complex formation. None of the currently used models considers these processes. CONCLUSIONS: The accuracy of models for neutral compounds is satisfactory, but the prediction of electrolyte behavior inside plants is still quite difficult due to gaps in knowledge.     

Environment contamination by mycotoxins and their occurrence in food and feed: Physiological aspects and economical approach

The contamination of food and feed by mycotoxins as toxic metabolites of fungi is a risk not only for consumers resulting in various embarrassment regarding health status and well-being, but also for producers, companies and export market on the ground of economic losses and ruined stability of economic trade. As it is given in historical evidence, the contamination of food by mycotoxins is a topic as old as a history of mankind, finding some evidence even in the ancient books and records. Nowadays, the mycotoxins are used in modern biotechnological laboratories and are considered an agent for targeting the specific cells (e.g., defected cells to eliminate them). However, this promising procedure is only the beginning. More concern is focused on mycotoxins as abiotic hazard agents. The dealing with them, systematic monitoring, and development of techniques for their elimination from agricultural commodities are worldwide issues concerning all countries. They can be found alone or in co-occurrence with other mycotoxins. Thus, this review aims to provide widened information regarding mycotoxins contamination in environment with the consequences on health of animals and humans. The inevitability for more data that correctly determine the risk points linked to mycotoxins occurrence and their specific reactions in the environment is demonstrated. This review includes various symptoms in animals and humans that result from mycotoxin exposure. For better understanding of mycotoxin's impact on animals, the sensitivities of various animal species to various mycotoxins are listed. Strategies for elimination and preventing the risks of mycotoxins contamination as well as economical approach are discussed. To complete the topic, some data from past as historical evidences are presented.     

Bromo- and bromochloro-dibenzo-p-dioxins and dibenzofurans in the environment

At least 36 million pounds of brominated flame retardants are used in the U.S. annually. Most if not all of these materials enter the waste stream via landfilled plastic waste, municipal incinerator fly ash, or automotive fluff waste. Analytical methodology is summarized which is suitable for environmental monitoring of these wastes, and the significance of the analytical results is discussed.     

Participation and environmental assessment in Northern and Southern cities, with examples from Stockholm and Jakarta

Increasing public participation in environmental assessment is a common goal, North and South. Despite a relative lack of formal education and institutionalised democracy, participatory appraisal has become far more popular in low-income areas in the South, where many advocates claim that it is possible to give local residents a large measure of control over both the research process and its follow-up. In the urban context, the potential for participatory environmental assessment is related to the spatial extent of the environmental challenges. The most critical environmental problems in Southern cities tend to be local, while the most critical environmental problems for Northern cities tend to be global. Using examples from Stockholm and Jakarta, this paper illustrates how such differences alter the comparative advantages of expert and lay knowledge, and the forms of participation that can realistically be aspired to.     

Short-chain oxygenated VOCs: Emission and uptake by plants and atmospheric sources,sinks, and concentrations

Emissions of volatile organic compounds (VOCs) have multiple atmospheric implications and play many roles in plant physiology and ecology. Among these VOCs, growing interest is being devoted to a group of short-chain oxygenated VOCs (oxVOCs). Technology improvements such as proton transfer reaction-mass spectrometry are facilitating the study of these hydrocarbons and new data regarding these compounds is continuously appearing. Here we review current knowledge of the emissions of these oxVOCs by plants and the factors that control them, and also provide an overview of sources, sinks, and concentrations found in the atmosphere.The oxVOCs reviewed here are formic and acetic acids, acetone, formaldehyde, acetaldehyde, methanol, and ethanol. In general, because of their water solubility (low gas–liquid partitioning coefficient), the plant-atmosphere exchange is stomatal-dependent, although it can also take place via the cuticle. This exchange is also determined by atmospheric mixing ratios. These compounds have relatively long atmospheric half-lives and reach considerable concentrations in the atmosphere in the range of ppbv. Likewise, under non-stressed conditions plants can emit all of these oxVOCs together at fluxes ranging from 0.2 up to 4.8 μg(C)g⁻¹(leaf dry weight)h⁻¹ and at rates that increase several-fold when under stress.Gaps in our knowledge regarding the processes involved in the synthesis, emission, uptake, and atmospheric reactivity of oxVOCs precludes the clarification of exactly what is conditioning plant-atmosphere exchange—and also when, how, and why this occurs—and these lacunae therefore warrant further research in this field.     

Status and trends of mercury pollution of the atmosphere and terrestrial ecosystems in Poland

The goal of this paper is to assess the current status and trends of total mercury (THg) contamination of the atmosphere and terrestrial ecosystems in Poland. The study shows that the reduced domestic and worldwide atmospheric emission of Hg resulted in decreased THg level in the terrestrial biotope and biosphere. Considering that Poland is one of the main Hg emitters in Europe, the THg concentrations in its abiotic environment are still elevated. However, the THg level in terrestrial organisms is relatively low, which is because a large proportion of Hg deposited on land is accumulated in organic-rich soils. Regarding the THg concentration, consumption of wildlife and livestock from Poland is safe for humans. Nevertheless, the authors indicate the need for effective environmental monitoring, based on selected bioindicators, which is crucial considering the slowing reduction of Hg emission combined with the consequences of the changing climate.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01505-1.     

Renewable energy and energy-saving initiatives in Greece: policy and experience

Energy policy is a key issue for economic and environmental policies. Indeed, energy is an indispensable element for economic development while, on the other hand, it causes severe environmental problems. In this context, a pressure for using renewable energy resources and for energy saving has emerged and expanded in recent years. As a result, energy policy is being reoriented under the new conditions. This paper examines this reorientation and its results in Greece where the bioclimatic conditions are in favour of renewable energy resources and energy-saving projects.     

Ozone and grosswetterlagen

Meteorological conditions have a decisive impact on surface ozone concentrations. In this study, an empirical model is used to explain the interdependence of ozone and grosswetterlagen. Different meteorological parameters such as air temperature, global solar radiation, relative humidity, wind direction and wind speed are used. Additional nitric oxide (NO) was taken as a representative for the emission situation and ozone maximum of the preceding day in order to evaluate the development of the photochemical situation. The dataset includes data collected over a period of three years (1992–1994) from three stations outside of Munich and one in the center of Munich. All values become variables by calculating means, sums or maxima of the basic dataset consisting of half-hour means. Seasonal periodicity of data is detected with Fourier analysis and eliminated by a division method after computing a seasonal index. The dataset is divided into three different grosswetterlagen groups, depending on main wind direction. One mostly cyclonic (westerly winds), one mixed (alternating winds) and one only anticyclonic (easterly winds). The last is completed with one summertime group including values from April to August. Factor analysis is performed for each group to obtain independent linear variable combinations. Overall, relative humidity is the dominant parameter, a typical value indicating meteorological conditions during a grosswetterlage. Linear multiple regression analysis is performed using the factors obtained to reveal how the ozone concentrations are explained in terms of meteorological parameters and NO. The results improve from cyclonic to anticyclonic grosswetterlagen in conformance with the increasing significance of photochemistry, indicated by the high solar radiation and high temperature, and the low relative humidity and low wind speed. The explained variance r² reaches its maximum with more than 50 % of the time in Munich center. This empirical model is applicable to the forecasting of local ozone maximum concentrations with a total standard error deviation of 8.5 to 12.8 % and, if ozone concentrations exceed 80 ppb, with a standard error deviation of 5.4 to 9.5 %.     

Ozone and grosswetterlagen

Meteorological conditions have a decisive impact on surface ozone concentrations. In this study, an empirical model is used to explain the interdependence of ozone and grosswetterlagen. Different meteorological parameters such as air temperature, global solar radiation, relative humidity, wind direction and wind speed are used. Additional nitric oxide (NO) was taken as a representative for the emission situation and ozone maximum of the preceding day in order to evaluate the development of the photochemical situation. The dataset includes data collected over a period of three years (1992–1994) from three stations outside of Munich and one in the center of Munich. All values become variables by calculating means, sums or maxima of the basic dataset consisting of half-hour means. Seasonal periodicity of data is detected with Fourier analysis and eliminated by a division method after computing a seasonal index. The dataset is divided into three different grosswetterlagen groups, depending on main wind direction. One mostly cyclonic (westerly winds), onemixed (alternating winds) and one onlyanticyclonic (easterly winds). The last is completed with one summertime group including values from April to August. Factor analysis is performed for each group to obtain independent linear variable combinations. Overall, relative humidity is the dominant parameter, a typical value indicating meteorological conditions during a grosswetterlage. Linear multiple regression analysis is performed using the factors obtained to reveal how the ozone concentrations are explained in terms of meteorological parameters and NO. The results improve from cyclonic to anticyclonic grosswetterlagen in conformance with the increasing significance of photochemistry, indicated by the high solar radiation and high temperature, and the low relative humidity and low wind speed. The explained variance r² reaches its maximum with more than 50 % of the time in Munich center. This empirical model is applicable to the forecasting of local ozone maximum concentrations with a total standard error deviation of 8.5 to 12.8 % and, if ozone concentrations exceed 80 ppb, with a standard error deviation of 5.4 to 9.5 %.     

四氯化碳的生产与应用及其淘汰策略

四氯化碳是一种消耗臭氧层物质,其生产和消费都面临着严峻的淘汰形势.简要叙述了四氯化碳的生产技术,以四氯化碳为原料生产大宗化学品和精细化学品的转化技术,四氯化碳作为化工助剂在我国的应用情况以及相应的淘汰方法和技术进展.     

Experimental and statistical validation of SPME-GC-MS analysis of phenol and chlorophenols in raw and treated water

A procedure based on solid-phase microextraction (SPME) and gas chromatography coupled with mass spectrometry (GC-MS) was developed and validated in order to analyse 10 phenols in water samples. The optimised conditions were obtained using polyacrylate fibre (PA), 20ml of sample volume, 10% NaCl, pH 4.0 and direct extraction at 35 degrees C and 1000rpm, for 40min. The linear range and quantification limits for these compounds by SPME-GC-MS were defined. An evaluation of the main uncertainty sources of this method is included, which allows expanded uncertainties in the 9.4-35% range for the majority of the compounds. The main source of uncertainty is associated with matrix effects. The validated method is suitable for monitoring the production and distribution of potable water and was used, in field trials, for the analysis of samples from main intakes of water (surface or underground) and from water supply system of a large area (Lisbon and neighbour municipalities).     

Multi-criteria analysis and risk assessment

ELECTRE or Concordance Analysis is a French system of multicriteria analysis which is used in economics.The application of ELECTRE for hazard evaluation and risk assessment of chemical substances is suggested, and a first attempt in adapting it for this purpose is presented.     

Nanotechnology and water purification: Indian know-how and challenges

Water contamination being ubiquitous problem across the world. A significant strata of population worldwide are still struggling to get drinkable water. This demand to develop technologies to provide clean water at affordable price is unveiling the need of rigorous research in this area. There are several technologies available for removal of persistent as well as emerging pollutants from water. Nanotechnology-based technology are providing the promising solution because of its extraordinary characteristics like large surface area, low cost maintenance and reuse, etc. During the past decade, there is an advancement in the field of nanotechnology and diligent efforts of researchers in achieving milestones in developing nanosorbents, nanostructured catalytic membranes, efficient photo catalysts, bioactive nanoparticles and new filtration regime. This article gives an overview of nanotechnology applications in water purification in India with an attempt to ponder indigenous technologies for implementation. A bibliometric approach is applied to bring the indigenous technologies available. In addition, we discuss some challenges associated with the development of convincing material and building water processing plants for purification of the wastewater.     

Antagonism and synergism between lead and zinc in amphibian larvae

Lead and zinc effects on Bufo arenarum larval survival were studied in single and combined treatments. On a weight basis, lead is about twice as toxic as zinc. The antagonism or synergism between these heavy metals is dose-dependent.