Predictive control based on neural network models with I/O feedback linearization

This paper presents an approach for the constrained non-linear predictive control problem based on the input-output feedback linearization (IOFL) of a general non-linear system modelled by a discrete-time affine neural network model. Using the resulting linear system in the formulation of the original non-linear predictive control problem enables to restate the optimization problem as the minimization of a quadratic function, which solution can be found using reliable and fast quadratic programming (QP) routines. However, the presence of a non-linear feedback linearizing controller maps the original linear input constraints onto non-linear and state dependent constraints on the controller output, which invalidates a direct application of QP routines. In order to cope with this problem and still be able to use QP routines, an approximate method is proposed which simultaneously guarantees a feasible solution without constraints violation over the complete prediction horizon within a finite number of steps, while allowing only for a small performance degradation.     

一种基于Wiener模型的非线性预测控制算法

针对一类Wiener模型描述的非线性系统,提出了一种改进的非线性预测控制算法.该算法利用Laguerre函数描述Wiener模型动态线性部分的控制信号，将预测控制中在预测时域内优化求解未来控制输入序列转化为优化求解一组无记忆的Laguerre系数,以减少优化所需的计算量.利用静态模糊模型来逼近Wiener模型的非线性部分,将非线性预测控制优化问题转化为线性预测控制优化问题,克服了求控制输入时解非线性方程的困难,进而推导出了预测控制输入的解析式.CSTR过程的仿真结果表明了本文算法的有效性和可行性.     

Wiener model based nonlinear predictive control

This paper addresses the problem of discrete-time nonlinear predictive control of W iener systems. Wiener-model-based nonlinear predictive control combines the advantages of linear-model-based predictive control and gain scheduling while retaining a moderate level of computational complexity. A clear relation is shown between an iteration in the optimization of the nonlinear control problem and the control problem of the underlying linear-model-based method. This relation has a simple form of gain scheduling, thus the properties of the nonlinear control system can be analysed from the comprehensible linear control aspect. Several disturbance rejection techniques are proposed and compared. The method was tested on a simulated model of a pH neutralization process. The performance was excellent also in the case of a considerable plant-tomodel mismatch. The method can be applied as a first next step in cases where the performance of linear control is unsatisfactory owing to process nonlinearity.     

Fuzzy Constrained Min-Max Model Predictive Control Based on Piecewise Lyapunov Functions

This paper proposes two novel stable fuzzy model predictive controllers based on piecewise Lyapunov functions and the min-max optimization of a quasi-worst case infinite horizon objective function. The main idea is to design state feedback control laws that minimize the worst case objective function based on fuzzy model prediction, and thus to obtain the optimal transient control performance, which is of great importance in industrial process control. Moreover, in both of these predictive controllers, piecewise Lyapunov functions have been used in order to reduce the conservatism of those existent predictive controllers based on common Lyapunov functions. It is shown that the asymptotic stability of the resulting closed-loop discrete-time fuzzy predictive control systems can be established by solving a set of linear matrix inequalities. Moreover, the controller designs of the closed-loop control systems with desired decay rate and input constraints are also considered. Simulations on a numerical example and a highly nonlinear benchmark system are presented to demonstrate the performance of the proposed fuzzy predictive controllers.     

锅炉–汽轮机系统的模糊经济模型预测控制

现代电厂的优化控制通常采用双层控制结构,上层通过优化经济性能指标获得稳态设定值,传递到下层实现设定值跟踪.然而,传统的控制结构往往会忽略动态跟踪过程中的经济性能.本文针对锅炉–汽轮机系统设计了基于模糊模型的经济模型预测控制策略.通过离线设计稳定的线性反馈控制律和可行域,来保证优化问题的递推可行性和稳定性.通过在线求解双模态经济模型预测控制优化问题,实现锅炉汽轮机系统动态过程中经济性能的提高.大范围和小范围负荷变化情况下的仿真结果表明了本文提出的模糊经济模型预测控制的有效性.     

Predictive Functional Control Based on Fuzzy Model: Design and Stability Study

In the paper the design methodology and stability analysis of parallel distributed fuzzy model based predictive control is presented. The idea is to design a control law for each rule of the fuzzy model and blend them together. The proposed control algorithm is developed in state space domain and is given in analytical form. The analytical form brings advantages in comparison with optimization based control schemes especially in the sence of realization in real-time. The stability analysis and design problems can be viewed as a linear matrix inequalities problem. This problem is solved by convex programming involving LMIs. In the paper a sufficient stability condition for parallel distributed fuzzy model-based predictive control is given. The problem is illustrated by an example on magnetic suspension system.     

Robustness design of nonlinear dynamic systems via fuzzy linearcontrol

This study introduces a fuzzy linear control design method for nonlinear systems with optimal H^∞ robustness performance. First, the Takagi and Sugeno fuzzy linear model (1985) is employed to approximate a nonlinear system. Next, based on the fuzzy linear model, a fuzzy controller is developed to stabilize the nonlinear system, and at the same time the effect of external disturbance on control performance is attenuated to a minimum level. Thus based on the fuzzy linear model, H^∞ performance design can be achieved in nonlinear control systems. In the proposed fuzzy linear control method, the fuzzy linear model provides rough control to approximate the nonlinear control system, while the H^∞ scheme provides precise control to achieve the optimal robustness performance. Linear matrix inequality (LMI) techniques are employed to solve this robust fuzzy control problem. In the case that state variables are unavailable, a fuzzy observer-based H^∞ control is also proposed to achieve a robust optimization design for nonlinear systems. A simulation example is given to illustrate the performance of the proposed design method     

A multivariable predictive fuzzy PID control system

In this paper, a novel multivariable predictive fuzzy-proportional-integral-derivative (F-PID) control system is developed by incorporating the fuzzy and PID control approaches into the predictive control framework. The developed control system has two main units referred as adaptation and application parts. The adaptation part consists of a F-PID controller and a fuzzy predictor. The incremental control actions are generated by the F-PID controller. The controller parameters are adjusted with the predictive control approach. The fuzzy predictor provides the multi-step ahead predictions of the plant outputs. Therefore, the F-PID controller parameters are adjusted by minimizing the errors between the predicted plant outputs and reference trajectories over the prediction horizon. The fuzzy predictor is trained with an on-line training procedure in order to adapt the changes in the plant dynamics and improve the prediction accuracy. The Levenberg–Marquardt (LM) optimization method with a trust region approach is used to adjust both the controller and predictor fuzzy systems parameters. In the application part, an identical F-PID controller of the adaptation part is used to control the actual plant. The adjusted parameter values are transferred to this identical controller at each time step. The performance of the proposed control system is tested for both single-input single-output (SISO) and multiple-input multiple-output (MIMO) nonlinear control problems. The adaptation, robustness to noise, disturbance rejection properties together with the tracking performances are examined in the simulations.     

Model Predictive Control of Nonlinear Discrete Time Systems with Guaranteed Stability

This paper presents the design of a new robust model predictive control algorithm for nonlinear systems represented by a linear model with unstructured uncertainty. The linear model is obtained by linearizing the nonlinear system at an operating point and the difference between the nonlinear and linear model is considered as a Lipschitz nonlinear function. The controller is designed for the linear model, which fulfills the stabilization condition for the nonlinear term. Unlike previous studies that have not considered a valid Lipschitz matrix of nonlinear term in the design process, we propose an algorithm in this paper in which it is considered. Therefore, the closed loop stability of the nonlinear system is guaranteed. A novel SOS optimization problem to determine design parameters is introduced, which leads to improved closed‐loop performance in comparison to a trial and error tuning procedure. Furthermore, an algorithm is presented to enlarge the region of attraction for the nonlinear closed‐loop system. Stability is improved by checking some additional conditions if which the system may be unstable if not considered. The validity of the proposed algorithm is confirmed by examples.     

On-line tuning strategy for model predictive controllers

This paper presents an intuitive on-line tuning strategy for linear model predictive control (MPC) algorithms. The tuning strategy is based on the linear approximation between the closed-loop predicted output and the MPC tuning parameters. By direct utilization of the sensitivity expressions for the closed-loop response with respect to the MPC tuning parameters, new values of the tuning parameters can be found to steer the MPC feedback response inside predefined time-domain performance specifications. Hence, the algorithm is cast as a simple constrained least squares optimization problem which has a straightforward solution. The simplicity of this strategy makes it more practical for on-line implementation. Effectiveness of the proposed strategy is tested on two simulated examples. One is a linear model for a three-product distillation column and the second is a non-linear model for a CSTR. The effectiveness of the proposed tuning method is compared to an exiting offline tuning method and showed superior performance.     

Input-output linearizing control of constrained nonlinear processes

An input-output linearization strategy for constrained nonlinear processes is proposed. The system may have constraints on both the manipulated input and the controlled output. The nonlinear control system is comprised of: (i) an input-output linearizing controller that compensates for processes nonlinearities; (ii) a constraint mapping algorithm that transforms the original input constraints into constraints on the manipulated input of the feedback linearized system; (iii) a linear model predictive controller that regulates the resulting constrained linear system; and (iv) a disturbance model that ensures offset-free setpoint tracking. As a result of these features, the approach combines the computational simplicity of input output linearization and the constraint handling capability of model predictive control. Simulation results for a continuous stirred tank reactor demonstrate the superior performance of the proposed strategy as compared to conventional input-output linearizing control and model predictive control techniques.     

基于T-S模糊模型的非线性预测控制策略

提出了一种新的基于T-S模糊模型的非线性预测控制策略. T-S模糊模型用于描述对象的非线性动态特性, 通过将模糊模型的输出反馈回来作为模型输入, 从而构成了模糊多步预报器. 由于T-S模糊模型每条规则的结论部分是一个线性模型, 因此整个模糊模型可以看作一个线性时变系统, 从而将模糊预测控制器中的非线性优化问题转化为一个线性二次寻优问题, 以方便求解. pH中和过程的仿真结果表明其性能优于传统的动态矩阵控制器.     

Theoretical analysis of unconstrained nonlinear model predictive control

Model predictive control (MPC) is a well-established controller design strategy for linear process models. Because many chemical and biological processes exhibit significant nonlinear behaviour, several MPC techniques based on nonlinear process models have recently been proposed. The most significant difference between these techniques is the computational approach used to solve the nonlinear model predictive control (NMPC) optimization problem. Consequently, analysis of NMPC techniques is often connected to the computational approach employed. In this paper, a theoretical analysis of unconstrained NMPC is presented that is independent of the computational approach. A nonlinear discrete-time, state-space model is used to predict the effects of future inputs on future process outputs. It is shown that model inverse, pole-placement, and steady-state controllers can be obtained by suitable selection of the control and prediction horizons. Moreover, the NMPC optimization problem can be modified to yield nonlinear internal model control (NIMC). The computational requirements of NIMC are considerably less than NMPC, but the NIMC approach is currently restricted to nonlinear models with well-defined and stable inverses. The NIMC controller is shown to provide superior servo and regulatory performance to a linear IMC controller for a continuous stirred tank reactor.     

Fuzzy gain scheduling: controller and observer design based on Lyapunov method and convex optimization

Addresses model-based fuzzy control. A constructive and automated method for the design of a gain-scheduling controller is presented. Based on a given Takagi-Sugeno fuzzy model of the plant, the controller is designed such that stability and prescribed performance of the closed loop are guaranteed. These properties are valid in a wide working range around an equilibrium without restrictions to slowly varying trajectories. The synthesis is based on linear matrix inequalities and convex optimization techniques. If required, a fuzzy state estimator and an extended controller can be included, providing a zero steady-state error in the presence of disturbances and modeling errors. The proposed method has been applied to a control of a laboratory liquid-level process. Hence, the performance has been evaluated in simulations as well as in real-time control.     

基于扩张状态观测器的车辆横摆稳定模型预测控制器设计

针对车辆横摆稳定性控制问题,本文提出一种基于扩张状态观测器的线性模型预测控制器设计方法.首先,将非线性车辆模型线性化,建立带有模型误差干扰项的线性模型,其中线性化导致的模型误差采用扩张状态观测器估计得到,并证明了观测器的稳定性.然后基于此模型设计线性预测控制器,近似实现了非线性预测控制器的控制效果,同时降低了计算量.最后,通过不同路况下的仿真实验结果,验证了所提方法的计算性能和控制效果.     

A PSO-BASED MULTIVARIABLE FUZZY DECISION-MAKING PREDICTIVE CONTROLLER FOR A ONCE-THROUGH 300-MW POWER PLANT

Model predictive control is an available method for controlling large-lag process in power plants, but conventional constrained predictive control cannot deal with the widely existent uncertainties and nonlinearities in power plants. With the help of the fuzzy set theory, this article proposes a new constrained predictive control algorithm based on Fuzzy Decision-Making Method (FDMPC). Compared with the other traditional constrained predictive control, this new algorithm replaces the conventional objective function with the appropriate fuzzy index function. As a result, it is easy to integrate the constraints into the fuzzy index function, which can greatly reduce the complexity of the optimization. Then a new evolutionary computation method named particle swarm optimization is firstly applied into the design of a model predictive controller. Moreover, this article also demonstrates that the conventional predictive control is actually a particular case of the proposed algorithm even though in the MIMO case, so this new algorithm is an extension of the traditional constrained predictive control strategy. At last, the proposed FDMPC has been applied into a real once-through power unit model, and the simulation results have validated the good control performance of the proposed FDMPC.     

Fuzzy model predictive control

A fuzzy model predictive control (FMPC) approach is introduced to design a control system for a highly nonlinear process. In this approach, a process system is described by a fuzzy convolution model that consists of a number of quasi-linear fuzzy implications. In controller design, prediction errors and control energy are minimized through a two-layered iterative optimization process. At the lower layer, optimal local control policies are identified to minimize prediction errors in each subsystem. A near optimum is then identified through coordinating the subsystems to reach an overall minimum prediction error at the upper layer. The two-layered computing scheme avoids extensive online nonlinear optimization and permits the design of a controller based on linear control theory. The efficacy of the FMPC approach is demonstrated through three examples     

智轨电车横向运动预测控制研究

文章通过分析智轨电车的横向运动特性,将每节车的横摆角速度、横向加速度以及受力联系起来,建立3节车辆之间的运动学和动力学关系;提出一种能够反映智轨电车横向动力学特性的4自由度线性单轨模型;并将所建立的模型与Trucksim中的高精度非线性模型进行对比,验证了所建立模型的有效性及准确性;采用模型预测控制方法进行智轨电车轨迹跟踪控制研究,根据列车行驶过程中的优化目标,确定其评价函数,将多步预测控制问题转化为线性二次型(QP)问题进行求解。仿真结果表明,应用该算法的智轨电车能够达到很好的轨迹跟踪效果。     

Output tracking of constrained nonlinear processes with offset-free input-to-state stable fuzzy predictive control

This paper develops an efficient offset-free output feedback predictive control approach to nonlinear processes based on their approximate fuzzy models as well as an integrating disturbance model. The estimated disturbance signals account for all the plant-model mismatch and unmodeled plant disturbances. An augmented piecewise observer, constructed by solving some linear matrix inequalities, is used to estimate the system states and the lumped disturbances. Based on the reference from an online constrained target generator, the fuzzy model predictive control law can be easily obtained by solving a convex semi-definite programming optimization problem subject to several linear matrix inequalities. The resulting closed-loop system is guaranteed to be input-to-state stable even in the presence of observer estimation error. The zero offset output tracking property of the proposed control approach is proved, and subsequently demonstrated by the simulation results on a strongly nonlinear benchmark plant.     

A non-linear controller design method for processes with saturating actuators

An optimization approach is proposed to derive non-linear model-based control laws for non-linear processes with actuator saturation non-linearities. The derived control laws induce a linear closed-loop process output response in the absence of input constraints (are input-output linearizing), are able to minimize the mismatch between the constrained and the linear unconstrained process output responses, and inherently include optimal directionality and windup compensators. Connections between the derived control laws and (a) already available, input-output linearizing, non-linear, control methods, (b) modified internal model control, and (c) model state feedback control, are established. The application and performance of the derived control laws are shown by examples.