First measurements of time-dependent nucleation as a function of composition in Na2O · 2CaO · 3SiO2 glasses

First measurements of the composition dependence of the time-dependent nucleation rate are presented. Nucleation rates of the stoichiometric crystalline phase, Na₂O · 2CaO · 3SiO₂, from quenched glasses made with different SiO₂ concentrations were determined as a function of temperature and glass composition. A strong compositional dependence of the nucleation rates and a weak dependence for the induction times were observed. Using measured values of the liquidus temperatures and growth velocities as a function of glass composition, these data are shown to be consistent with predictions from the classical theory of nucleation, assuming a composition-dependent interfacial energy.     

Chemical durability of Na2OCaOSiO2 glasses in acid solutions

The resistance of Na₂OCaOSiO₂ glasses to acid solutions has been studied. The compositions studied were Na₂O · 4SiO₂, Na₂O · x CaO · (4?x) SiO₂ and a common electrode glass containing 22.63Na₂O and 5.58 CaO, mol%. The reaction was made at 40°C for about 3 h in 1N solutions of HCl, HNO₃ and H₂SO₄. Powdered glass samples were used and the reaction was followed by analyzing the solution for soda, lime and silica.The extraction rates of each constituent were measured. The effect of acid concentration was also studied for each glass using 10^?3–10N solutions of the three acids for a fixed time. The quantity of calcium extracted increased slowly at first with increasing calcium content in the glass, but rapidly when the lime content exceeded ≈10 mol%. Above this concentration, both calcium and sodium appears to pass into solution in the same proportion in which they are present in the glass. The extraction rate was found to depend on the type and concentration of the acid used, being least in H₂SO₄ and much higher and almost equal in both HCl and HNO₃.An attempt was made to correlate the results of decomposition of the soda-lime-silica glasses to their membrane potentials in acidic solutions.     

Ion exchange between glass melts of the system Na2ORb2OSiO2

Ion exchange between glass melts of the quasi-binary system Na₂O · 3SiO₂Rb₂O₂ was investigated at 700—1300°C by means of a special capillary method. Concentration profiles were obtained by electron microprobe analysis and were evaluated for a concentration-dependent quasi-binary interdiffusion coefficient $\text{tilde}\text{D}$ using a modified Boltzmann-Matano method. At 700–1000°C interdiffusion could be obtained in pure form with $\text{tilde}\text{D}$ values ranging from about 10^?7 ?5 × 10^?6 cm² s^?1. Above 1000°C convection processes superimposed interdiffusion, making a further evaluation impossible. The data are compared with those from a 0g rocket experiment and are discussed with respect to a mixed-alkali effect and in terms of the Nernst-Planck diffusion model.     

The effect of alumina on the Sn/Sn redox equilibrium and the incorporation of tin in Na2O/Al2O3/SiO2 melts

Glasses with the basic compositions 10Na₂O · 10CaO · xAl₂O₃ · (80 − x)SiO₂ (x=0, 5, 15, 25) and 16Na₂O · 10CaO · xAl₂O₃ · (74 − x)SiO₂ (x=0, 5, 10, 15, 20) doped with 0.25-0.5 mol% SnO₂ were studied using square-wave-voltammetry at temperatures in the range from 1000 to 1600 °C. The voltammograms exhibit a maximum which increases linearly with increasing temperature. With increasing alumina concentration and decreasing Na₂O concentration the peak potentials get more negative. Mössbauer spectra showed two signals attributed to Sn²⁺ and Sn⁴⁺. Increasing alumina concentrations did not affect the isomer shift of Sn²⁺; however, they led to increasing quadrupole splitting, while in the case of Sn⁴⁺ both isomer shift and quadrupole splitting increased. A structural model is proposed which explains the effect of the composition on both the peak potentials and the Mössbauer parameters.     

Electrical and structural properties of y(MnxFe3−xO4)−(1 − y)B2O3 glasses between 400 and 1000 K

The structure of silica glass was investigated by high-resolution electron microscopy. Observed dark field images were compared with those calculated by a kinematical electron diffraction theory on the basis of random and crystallite models. Bright small spots with sharp contrast were observed in the dark field image, which were found to originate from crystallites. It was indicated that small crystallites of about 17 Å in size were present in silica glass.     

Magnetic properties of partially crystallized Na2OFe2O3SiO2 glass

The magnetic properties of partially crystallized glasses of the Na₂OFe₂O₃SiO₂ system which had undergone thermal treatments of different durations and intensities leading to phase separation, have been measured in order to investigate the influence of magnetic grain growth. Magnetic moments were evaluated at liquid helium temperature in fields up to 76 kOe. The magnetic susceptibilities of some of the samples have been measured between 4.2 and 300 K. They were shown to depend strongly on the dimensions of the grains, i.e. on the thermal treatment of each sample. The anomalous values observed are discussed in terms of the apparent presence of superantiferromagnetism superimposed on the contribution of paramagnetic Fe³⁺ ions dispersed in the amorphous matrix.     

Electric conductivity of glasses in the system Na2O/CaO/SiO2/Fe2O3

The addition of polyvalent transition metal ions to the usually insulating traditional soda-lime-silica glasses can lead to semiconducting properties. We report on synthesis of glasses and glass-ceramics in a soda-lime-silicate based system containing Fe₂O₃ in the concentration range from 5 to 30 mol%. Two sub-systems were considered, in one of them the ratio [Na₂O]/[Fe₂O₃] was varied while in the other one, the ratio [SiO₂]/[Fe₂O₃] was changed. The phase composition of the synthesized products was characterized by X-ray diffraction and energy dispersive X-ray analysis, while the electrical properties were studied by impedance spectroscopy. Partially crystallized non-reduced samples are semiconducting even at room temperature while the glassy samples (both reduced and non-reduced) exhibit semiconducting properties at temperatures equal or larger than 100 °C. An attempt is done to predict the physical approximation explaining the conduction process in the glasses.     

Crystallization of Na2OSiO2 gel and glass

The crystallization behavior of a 19 wt% soda silica gel and gel-derived glass was compared to that of the ordinary glass of the same composition. Both bulk and ground glass samples were utilized. X-ray diffraction measurements were made to identify the crystalline phases and gauge the extent of crystallization. It was found that the gel crystallized in a distinctive manner, while the gel glass behavior was not qualitatively different from that of the ordinary glass.     

Mechanochemical metathesis synthesis and characterization of nano-structured MnV2O6·xH2O (x=2, 4)

A solid-state metathesis approach for the synthesis of hydrated MnV₂O₆·xH₂O (x=2, 4) materials driven by mechanochemical activation energy has been demonstrated. The metathesis pathway of forming the desired product is confirmed by the presence of high lattice energy by-product such as NaCl. The structural, optical, and chemical properties of the synthesized materials are examined by powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and diffused reflectance measurements in the UV–vis range. The valence state of Mn and V was determined to be +2 and +5, respectively, for the title compounds and the bandgap values determined showed these materials are likely to be semiconductors.     

Bond character and properties of the mixed alkali system Na2OK2OAl2O3SiO2

The mixed alkali glass system Na₂OK₂OAl₂O₃SiO₂ was investigated. Density, transformation temperature, refractive index, and chemical durability were studied. Optical absorption and ESR spectra of the CuO-doped glasses were determined.Calculations of the polarizability of O^2?, bonding parameters of the Cu²⁺ complex, and the packing density are presented. It was found that for the mixed alkali glasses, the oxygen- alkali bond has a more ionic character than expected from additivity. This fact enables the non-linear changes of the refractive index, of the shift of the Cu²⁺ absorption band, and of the covalency to be interpreted as the Na mole fraction is varied. It is also possible to explain qualitatively the density, T_g and chemical durability non-linear variations with change of the Na content by the ionicity deviations of the bond character and the postulated pairs of Na⁺ and K⁺ ions in the mixed alkali glasses.     

Structural analysis of Na2OGa2O3SiO2 glasses by the X-ray diffraction method

The structure of Na₂OGa₂O₃SiO₂ glasses of four different compositions containing up to 45 mol. % Ga₂O₃ has been determined by the X-ray diffraction method. The radial distribution function D(r) obtained indicates that Ga³⁺ ions are in fourfold coordination and GaO₄ tetrahedra are formed in these glasses. The reduced intensity function S·i(S) and radial distribution function D(r) which were calculated based on a structural model for A-25, 0.25(Ga₂O₃)·0.75(Na₂O·2SiO₂)/3 glass agreed well with the observed ones.     

Sodium tracer diffusion in glasses of the type (Na2O)0.2(B2O3)y(SiO2)0.8 − y

Sodium tracer diffusion coefficients, D^?_Na, have been measured in sodium borosilicate glasses of the type (Na₂O)_0.2(B₂O₃)_y(SiO₂)_0.8−y as a function of temperature and the composition parameter y. At constant temperature, the tracer diffusion coefficient of sodium decreases as y increases. The activation enthalpy derived from sodium tracer diffusion data for temperatures up to about 350 °C increases about linearly with increasing values of y from about 70 to 100 kJ/mol. The pre-exponential factor of the sodium tracer diffusion coefficient as a function of y varies by about one order of magnitude and has a minimum at near y = 0.3.     

The mixed alkali effect in the Na2OCs2OSiO2 glasses

As an approach to the mixed alkali effect in glass, the self-diffusion coefficients of sodium and cesium ions in Na₂OCs₂OSiO₂ glasses were measured at temperatures 350–550°C. Electrical conductivity of the glasses and the transport number for sodium ions were also measured. The substitution of the alkali ions in the glass by different alkali ions caused the mobility of each alkali ion to decrease pronouncedly and the activation energy for migration to increase rapidly. The increase of activation energy was attributed to an increase in alkali-oxygen bond strength resulting from the presence of two kinds of alkali ions. This is related to the expectation that the activity of the alkali ions decreases when two alkali ions are mixed.     

The effect of composition on UV-vis-NIR spectra of iron doped glasses in the systems Na2O/MgO/SiO2 and Na2O/MgO/Al2O3/SiO2

Glasses with the compositions xNa₂O · 10MgO · (90 − x)SiO₂, 10Na₂O · xMgO · (90 − x)SiO₂, 5Na₂O · 15MgO · xAl₂O₃ · (80 − x)SiO₂, xNa₂O · 10MgO · 10Al₂O₃ · (80 − x)SiO₂, 10Na₂O · 10MgO · xAl₂O₃ · (80 − x)SiO₂, 10Na₂O · 5MgO · 10Al₂O₃ · (80 − x)SiO₂ were melted and studied using UV-vis-NIR spectroscopy in the wavenumber range from 5000 to 30 000 cm⁻¹. At [Al₂O₃] > [Na₂O], the UV-cut off is strongly shifted to smaller wavenumbers and the NIR peak at around 10 000 cm⁻¹ attributed to Fe²⁺ in sixfold coordination gets narrower. Furthermore, the intensity of the NIR peak at 5500 cm⁻¹ increases. This is explained by the incorporation of iron in the respective glass structures.     

Solubility of YBa2Cu3O7−δ and Nd1+xBa2−xCu3O7±δ in the BaO/CuO flux

The knowledge of the phase relations and solubilities in the Y–Ba–Cu–O and Nd–Ba–Cu–O systems are of fundamental importance for crystal growth and liquid-phase epitaxy of YBa₂Cu₃O_7−δ (YBCO) and Nd_1+xBa_2−xCu₃O_7±δ (NdBCO). The determination of the solubility curve of YBCO and NdBCO in a BaO/CuO flux containing 31 mol% BaO was done by observation of the formation and dissolution of crystals on the surface of the high-temperature solution. The heat of the solution of YBCO at 1000°C was found to be 34.7 kcal/mol, and for NdBCO at 1060°C, it was found to be 28.1 kcal/mol. The determination of the solubility curves requires special care, and the problems of the time-dependent shift of the solution composition due to the corrosion of the crucible is discussed. The scatter of the solubility data published by different authors could be due to the use of solutions with different Ba : Cu ratios, different determination methods, i.e. different crystallization mechanisms, different crucibles and starting chemicals.     

A kinetic treatment of glass formation. VIII: Critical cooling rates for Na2OSiO2 and K2OSiO2 glasses

The critical cooling rates required to form glass have been measured for Na₂OSiO₂ compositions containing 15.4, 20.6, 29.9 and 34.0 wt% Na₂O and for K₂OSiO₂ compositions containing 15.3, 21.7, 34.3, 41.8 and 43.9 wt% K₂O. Pronounced minima in critical cooling rate are observed in the ranges about 25 wt% Na₂O and 33 wt% K₂O. The locations of these minima correlate with regions of low liquidus temperatures (near eutectics) in the phase diagrams.Calculations of critical cooling rates have been carried out using the analysis of crystallization statistics and the simplified model of glass formation. In both cases, the models predict well the measured critical cooling rates and their variation with composition.     

A square-wave voltammetric study on the diffusivities of polyvalent elements in CaO/BaO/Al2O3/SiO2 glass melts

Diffusion coefficients of various polyvalent ions (Sn²⁺, As³⁺, As⁵⁺, Sb³⁺, Sb⁵⁺, Cr³⁺, Ti⁴⁺, V⁴⁺, V⁵⁺ and Fe³⁺) were measured in melts with the basic compositions of 10CaO·10 BaO·10Al₂O₃·70SiO₂ and 10CaO·10BaO·15Al₂O₃·65SiO₂ by means of square-wave voltammetry. At temperatures in the range of 1300-1600 °C, linear correlations between logD and 1/T were observed. At 1400 °C, the diffusion coefficients obtained are compared with those obtained from other glass melt compositions.     

Brillouin spectra of mixed alkali glasses: xCs2O(1−x)Na2O5SiO2

The Brillouin spectra of a series of mixed alkali glasses, of the composition _xCs₂O(1?x)Na₂O5SiO₂, have been measured and analyzed. Significant nonlinearities are found for the variation of the isothermal compressibility [K_T,0(T_f)] and Landau-Placzeck ratio, with a minimum observed in each as a function of x, while the longitudinal and transverse sound velocities and related elastic constants, C₁₁, C₄₄ and Young's modulus, E, vary monotonically (nearly linearly) with x. The results are interpreted in connection with related ultrasonic data and the effect of varying composition on the mechanical properties of mixed alkali glasses.     

Preparation and physical properties of amorphous V2O5 containing TiO2, Na2O or Li2O

V₂O₅ gels containing up to 18 mol% of TiO₂ were obtained through the simultaneous hydrolysis of alkoxides in ethanol solution. V₂O₅ gels containing Na₂O or Li₂O were obtained through the ion exchange method. The crystallization temperature, T_cr, of the gels increased and the H₂O content of the gels decreased by the addition of TiO₂ or Na₂O. These additives seem to stabilize the amorphous state of the gels. On the other hand, T_cr and the H₂O-content slightly varied with the addition of Li₂O. No ionic polarization was observed in coating films of the gels dried at temperatures below T_cr. The dc conductivity of the films was anisotropic, and increased with the addition of Li₂O or Na₂O. However, it decreased with increasing TiO₂ content. The fiber-like structure of gels was observed by TEM. The gels obtained from alkoxides were thin and short in comparison with the gels obtained through the ion exchange method.     

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

The surface morphology of Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond with and without calcium oxide was studied by soaking vitrified bonded microcrystalline alumina composites in water. The content of water introduced to the vitrified bond was determined by thermal gravity analysis, and the effects of water and calcium on the phase separation and nucleation of the vitrified bond were investigated using scanning electron microscope and energy-dispersive X-ray spectrometer. Soaked in water for 72 h, the Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond presented a porous surface, and its bending strength declined with increasing sintering temperature. However, the Na₂O–CaO–B₂O₃–Al₂O₃–SiO₂ vitrified bond was more durable against aqueous coolant even needle-shape crystals were found clustered on the surface of the vitrified bond. The crystals were enriched with aluminosilicate tested by energy-dispersive X-ray spectrums. The appearance of crystals lessened the dissolution of the vitrified bond and made the bending strength increase in the sintering temperature region between 870 °C and 930 °C.