Metallized Organoclays as New Intermediates for Aqueous Nanohybrid Dispersions,Nanohybrid Catalysts and Antimicrobial Polymer Hybrid Nanocomposites

Summary: The chemical metallization of aqueous bentonite dispersions afforded stable aqueous hybrid nanoparticle dispersions containing simultaneously dispersed sodium bentonite nanoplatelets together with bentonite supported silver, palladium, or copper nanoparticles with average metal nanoparticle diameters varying between 14 and 40 nm. Such aqueous bentonite/metal hybrid nanoparticle dispersions were blended with cationic PMMA latex to produce PMMA hybrid nanocomposites containing exfoliated polymer‐grafted organoclay together with bentonite supported metal nanoparticles. This dispersion blend formation was investigated with respect to the role of nanostructure formation and mechanical properties. Palladium/bentonite hybrid dispersions were used as catalysts for hydrogenation reactions and the electroless plating of copper. In contrast to the conventional organoclay nanocomposites, the PMMA hybrid nanocomposites, containing simultaneously dispersed organoclay nanoplatelets together with organoclay supported silver nanoparticles, exhibited high antimicrobial activity against the ubiquitous bacterium Staphylococcus aureus, even at low silver content.

Preparation of a polymer hybrid nanocomposite.     

Synthesis of copper–polystyrene nanocomposite particles using water in supercritical carbon dioxide medium and its antimicrobial activity

Copper‐encapsulated polystyrene nanocomposite particles were prepared through ex situ dispersion of Cu nanoparticles into monomer droplets and subsequent polymerization using water in supercritical carbon dioxide (water‐in‐sc‐CO₂) at 70°C. First, colloidal dispersion of copper nanoparticles was synthesized by chemical reduction of copper chloride (CuCl₂) using sodium borohydrate (NaBH₄) as reducing agent. Colloidal dispersion of copper nanoparticles was added slowly during the polymerization of styrene using water‐in‐sc‐CO₂ medium at 70°C and 20.68 MPa. Cu nanoparticle encapsulated polymer particles were characterized by UV, X‐ray diffraction, thermogravimetric analysis, SEM, and TEM. Cu nanoparticles were uniformly distributed inside the polymer matrix during the polymerization process. This work represents a simple way to prepare a variety of metal nanoparticles encapsulated polymer particles using water‐in‐sc‐CO₂ medium. The Cu/polystyrene nanocomposite particles exhibit antimicrobial activity against a number of bacteria. The current work represents a simple, cheap and universal way to prepare a variety of metal–polymer nanocomposite materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and properties of poly[styrene‐co‐(butyl acrylate)‐co‐(acrylic acid)]/silica nanocomposite latex prepared using an acidic silica sol

BACKGROUND: Polyacrylate/silica nanocomposite latexes have been fabricated using blending methods with silica nanopowder, in situ polymerization with surface‐functionalized silica nanoparticles or sol–gel processes with silica precursors. But these approaches have the disadvantages of limited silica load, poor emulsion stability or poor film‐forming ability. RESULTS: In this work, poly[styrene‐co‐(butyl acrylate)‐co‐(acrylic acid)] [P(St‐BA‐AA)]/silica nanocomposite latexes and their dried films were prepared by adding an acidic silica sol to the emulsion polymerization stage. Morphological and rheological characterization shows that the silica nanoparticles are not encapsulated within polymer latex particles, but interact partially with polymer latex particles via hydrogen bonds between the silanol groups and the ? COOH groups at the surface of the polymer particles. The dried nanocomposite films have a better UV‐blocking ability than the pure polymer film, and retain their transparency even with a silica content up to 9.1 wt%. More interestingly, the hardness of the nanocomposite films increases markedly with increasing silica content, and the toughness of the films is not reduced at silica contents up to 33.3 wt%. An unexpected improvement of the solvent resistance of the nanocomposite films is also observed. CONCLUSION: Highly stable P(St‐BA‐AA)/silica nanocomposite latexes can be prepared with a wide range of silica content using an acidic silica sol. The dried nanocomposite films of these latexes exhibit simultaneous improvement of hardness and toughness even at high silica load, and enhanced solvent resistance, presumably resulting from hydrogen bond interactions between polymer chains and silica particles as well as silica aggregate/particle networks. Copyright © 2009 Society of Chemical Industry     

In situ polymerization of polyurethane‐silver nanocomposite foams with intact thermal stability,improved mechanical performance,and induced antimicrobial properties

Silver nanoparticle‐reinforced thermoplastic polyurethane (PU/AgNP) nanocomposite foams were prepared using in situ polymerization techniques in accordance with DOW chemicals’ industrial standards. The foams exhibited improved mechanical performance, induced antimicrobial properties, and intact stability when subjected to a thermal degradation treatment. Scanning electron microscopy (SEM) indicated a homogeneous dispersion of the silver nanoparticle (AgNP) within the polymeric matrix at low filler loadings and a cluster formation at higher loadings. SEM also indicated the agglomeration of the silver nanofiller particles as a result of the thermal degradation treatment, which caused them to lose their nanoscopic characteristics and act as ordinary silver metal. Molecular modeling techniques were used to explain these observations and confirmed the higher repulsive interactions between the polymer chains and the silver nanoparticles with the increase in the nanofiller content. Stress relaxation of the nanocomposites showed optimum mechanical performance and lowest hysteresis for the 0.1% AgNP nanocomposites due to the confinement of the PU chains between the large number of the nanoparticles. Incubation with 0.1% foam inhibited the growth of Klebseilla spp. and Escherichia coli and to some extent Staphylococcus spp. This is very interesting as the same nanocomposite loaded with 0.1% AgNp has also shown the best mechanical performance highlighting the strong action of this “unclustered” low concentration on both the material and biomedical sides. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43125.     

Creating Conductive Copper–Silver Bimetallic Nanostructured Coatings Using a High Temperature Reducing Jet Aerosol Reactor

We report production of bimetallic nanostructured copper– silver coatings by in situ deposition and sintering of metal nanoparticles produced as an aerosol. The metal nanoparticles themselves have potential applications in printed electronics, catalysis, antibacterial coatings, and heat transfer fluids. In many applications, nanoparticles are dispersed in an ink, which is then printed or coated onto a substrate and converted into a nanostructured thin film. Direct deposition from the aerosol allows us to produce nanostructured thin films without first dispersing the particles in a solvent. The high temperature reducing jet process allows formation of these metal nanoparticles from low-cost metal salt precursors in the gas phase. In this method, a fuel-rich hydrogen flame provides a low-cost source of energy to drive nanoparticle formation in a reducing environment. The aqueous precursor solution is delivered into the hot combustion product gases within a converging–diverging nozzle. The high-speed gas flow atomizes the precursor and provides exceptionally rapid mixing of the precursor with the hot gases. Here, particles are formed, then immediately quenched and deposited on a glass substrate. The effect of the silver content of the mixed copper–silver films on their electrical conductivity was studied systematically, revealing an abrupt transition from low conductivity to high conductivity between 30 wt.% and 40 wt.% silver.

Copyright 2013 American Association for Aerosol Research     

A convenient approach to synthesize stable silver nanoparticles and silver/polystyrene nanocomposite particles

In this study, silver nanoparticles were prepared by the reduction of silver nitrate in SDS+ isopentanol/styrene/H₂O reverse microemulsion system using sodium citrate as reducing agent. The Ag/PS nanocomposite particles were prepared by in situ emulsion polymerization of the styrene system containing silver nanoparticles that did not separate from the reaction solution. The polymerization dynamic characteristic was studied, at the same time, silver nanparticles and the encapsulation of composite particles were characterized by Fourier‐transform‐infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X‐ray diffraction (XRD) measurement, UV–vis diffuse reflectance spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The results of TEM and UV–vis absorption spectra showed that well‐dispersed silver nanoparticles have a narrow size distribution. XRD showed that Ag and Ag/PS nanocomposite particles were less than 10 and 20 nm in size, which is similar to those observed by TEM. The results of XPS spectra revealed that the microemulsion system can stabilize the silver nanoparticles from aggregation and provided supporting evidence for the polystyrene encapsulated silver nanoparticle structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Self‐assembly of pH‐responsive acrylate latex particles at emulsion droplets interface

The self‐assembly of pH‐responsive poly (methyl methacrylate‐co‐acrylic acid) latex particles at emulsion droplet interfaces was achieved. Raising pH increases the hydrophilicity of the latex particles in situ and the latex particle acts as an efficient particulate emulsifier self‐assembling at emulsion droplet interface at around pH 10–11 but exhibits no emulsifier activity at higher pH. This effect can be reversibly induced simply by varying the aqueous phase pH and thus the latex emulsifier can be reassembled. The effect factors, including the aqueous phase pH, the surface carboxyl content, ζ‐Potential of the latex particles and oil phase solvent have been investigated. Using monomer as oil phase, the latex particles could stabilize emulsion droplets during polymerization and cage‐like polymer microspheres with hollow core/porous shell structure were obtained after polymerization. The mechanism of the latex particles self‐assembly was discussed. The morphologies of emulsion and microspheres were characterized by optical microscopy, scanning electron microscopy, and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(fluorinated acrylate)/silica hybrid nanocomposites

The nanocomposite particles (NPs) with inorganic silica as core and fluorinated polymer shell have been in situ synthesized via emulsion polymerization. The chemical composition and core‐shell structure were characterized by Fourier‐transform infrared spectrometry and transmission electron microscopy. The results showed that silica nanoparticles were encapsulated in latex particles, with single‐ and multicore morphologies coexisting. Thermal gravimetric analysis also suggested the successful encapsulation of silica into NPs with enhanced thermal stability. The surface properties of the latex films produced from the core‐shell particles were also investigated by contact angle method and water absorption measurement. Both fluorinated polymer and silica contributed to less water absorption ratio and lower surface‐free energy, which was composed of larger polar component and smaller disperse component, just reversed as usual. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Silver nanoparticles in polyvinylpyrrolidone grafted natural rubber

Polyvinylpyrrolidone grafted natural rubber (PVP-g-NR) latex was used as matrix to synthesize silver nanoparticles. The average diameter of the silver nanoparticles is 4.1 nm. The modified natural rubber was previously formed via in situ polymerization of N-vinyl-2-pyrrolidone (NVP) in natural rubber latex (NRL) using cumene hydroperoxide (CHP) and tetraethylenepentamine (TEPA) as a redox initiator. The evidence of PVP grafted rubber particles was demonstrated by extraction as well as gravimetric and FTIR studies. Transmission electron microscopy (TEM) studies of the Ag⁺/PVP-g-NR films after exposure to UV light, revealed distinct layers comprised of PVP-stabilized silver particles surrounding the rubber particle. This confirms the grafting of PVP, which stabilizes the silver particles as well as the rubber particles in a role that is similar to that of the protein in our previous work.     

Flame‐based synthesis and in situ functionalization of palladium alloy nanoparticles

Flame‐driven synthesis and functionalization of palladium‐containing nanoparticles is demonstrated using a high temperature reducing jet (HTRJ) process that decouples flame chemistry from particle formation chemistry and provides a reducing environment that enables synthesis of metal nanoparticles from low‐cost aqueous precursors. Nanoparticles with controlled palladium, copper, and silver content were synthesized and functionalized with amine‐containing ligands using both in situ and ex situ approaches. For in situ functionalization, octylamine was sprayed into the quench section of the HTRJ reactor to cap the nanoparticles in the gas phase. For the ex situ approach, the “bare” nanopowders were heated in various amines (hexylamine, octylamine, and oleylamine) to form stable dispersions. Use of oleylamine at high temperature allowed modification of the nanoparticle size and shape while maintaining the alloy composition. These in situ and ex situ functionalization methods provide flexibility to tailor particles for specific applications such as electrocatalysis or hydrogen purification. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3826–3834, 2018     

Synthesis and characterization of novel silver/L‐phenylalanine‐based optically active polyacrylate nanocomposite

Novel bioactive and optically active poly(N‐acryloyl‐L ‐phenylalanine) (PAPA) was synthesized by atom transfer radical polymerization. PAPA‐silver (Ag) nanocomposites have been successfully prepared via in situ reducing Ag⁺ ions anchored in the polymer chain using hydrazine hydrate as reducing agent in an aqueous medium. By controlling of the amount of Ag⁺ ions introduced, we have produced an organic/inorganic nanocomposite containing Ag nanoparticles with well controlled size. Nanocomposites were characterized by X‐ray diffraction (XRD), UV–Vis spectrophotometry, transmission electron microscopy, and Fourier transform infrared. XRD pattern showed presence of Ag nanoparticles. The PAPA/Ag nanocomposites with 1 : 10 silver nitrate (AgNO₃) : PAPA ratio revealed the presence of well‐dispersed Ag nanoparticles in the polymer matrix. All of these Ag nanoparticles formed are spherical and more than 80% of them are in the range of 15–25 nm. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Formation of silver nanoparticles created in situ in an amphiphilic block copolymer film

In this work, silver nanoparticles were synthesized with an amphiphilic diblock copolymer, polystyrene‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PS‐b‐PVP), as a template film. First, microphase‐separated amphiphilic PS‐b‐PVP (70 : 30 wt %) was synthesized through atom transfer radical polymerization. The self‐assembled block copolymer film was used to template the growth of silver nanoparticles by the introduction of a silver trifluoromethanesulfonate precursor and an ultraviolet irradiation process. The in situ formation of silver nanoparticles with an average size of 4–6 nm within the block copolymer template film was confirmed with transmission electron microscopy, ultraviolet–visible spectroscopy, and wide‐angle X‐ray scattering. Fourier transform infrared spectroscopy also demonstrated the selective incorporation and in situ formation of silver nanoparticles within the hydrophilic poly(1‐vinyl‐2‐pyrrolidone) domains, which were mostly due to the stronger interaction strength of the silver with the carbonyl oxygens of poly(1‐vinyl‐2‐pyrrolidone) in the block copolymer. This work provides a simple route for the in situ synthesis of silver nanoparticles within a polymer film. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Palladium‐catalyzed electroless plating of gold on latex particle surfaces

Gold can be deposited onto a latex particle surface via the growth of metal islands with the electroless plating method. A new method is proposed for the electroless plating of gold on the surface of poly(styrene‐co‐vinylimidazole) latex particles, which is catalyzed by palladium present on the latex particle surfaces. The palladium ions are anchored to the latex particle surfaces by the formation of a palladium–imidazole complex, and palladium nanoparticles are nucleated by a reductant. These palladium islands act as catalytic sites, so gold is preferentially deposited onto the latex particle surfaces. Transmission electron microscopy, X‐ray photoelectron spectroscopy, and sucrose density gradient column results indicate that the palladium is associated with the imidazole‐functionalized latex particles. Different gold loading levels and reductant types were explored. Latex particles were partially encapsulated by finely dispersed gold nanoparticles less than 2 nm in diameter or by gold islands with sizes ranging from 10 to 100 nm up to a gold loading level of 3.1 mg of Au/m² of latex. However, using higher gold loading levels led to uncontrollable electroless plating of gold because gold reduction in the water phase became very dominant even in the presence of catalytic palladium on the latex particle surface. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of polyaniline derivative and silver nanoparticle composites

BACKGROUND: There has been a recent surge of interest in the synthesis and applications of electroactive polymers with incorporated metal nanoparticles. These hybrid systems are expected to display synergistic properties between the conjugated polymers and the metal nanoparticles, making them potential candidates for applications in sensors and electronic devices. RESULTS: Composites of polyaniline derivatives—polyaniline, poly(2,5‐dimethoxyaniline) and poly(aniline‐2,5‐dimethoxyaniline)—and silver nanoparticles were prepared through simultaneous polymerization of aniline derivative and reduction of AgNO₃ in the presence of poly(styrene sulfonic acid) (PSS). We used AgNO₃ as one of the initial components (1) to form the silver nanoparticles and (2) as an oxidizing agent for initiation of the polymerization reaction. UV‐visible spectra of the synthesized nanocomposites reveal the synchronized formation of silver nanoparticles and polymer matrix. The morphology of the silver nanoparticles and degree of their dispersion in the nanocomposites were characterized by transmission electron microscopy. Thermogravimetric analysis and differential scanning calorimetry results indicate an enhancement of the thermal stability of the nanocomposites compared to the pure polymers. The electrical conductivity of the nanocomposites is in the range 10^?4 to 10^?2 S cm^?1. CONCLUSION: A single‐step process for the synthesis of silver nanoparticle–polyaniline derivative nanocomposites doped with PSS has been demonstrated. The approach in which silver nanoparticles are formed simultaneously during the polymerization process results in a good dispersion of the nanoparticles in the conductive polymer matrix. Copyright © 2008 Society of Chemical Industry     

Effect of acrylic monomer content on the properties of waterborne poly(urethane‐urea)/acrylic hybrid materials

Stable waterborne poly(urethane‐urea) (WBPU; soft segment content: 57%; dimethylol propionic acid: 19 mol %/5.8 wt %)–polyacrylate(methyl methacrylate/n‐butyl acrylate) (weight ratio: 4/1) hybrid latex (emulsions) with different acrylic contents [0, 10, 20, 30, and 40 wt % based on poly(urethane‐urea)] and without external surfactant were successfully prepared by in situ polymerization during a prepolymer mixing process. However, the as‐polymerized hybrid latex containing 50 wt % of acrylic monomer content was found to be unstable, indicating that about 50 wt % of acrylic monomer content was beyond the limit value of self‐emulsifying ability of WBPU anionomer prepared in this study. The breadth of particle size distribution of hybrid latex increased markedly from 20–75 to 55–275 nm with increasing acrylic monomer content from 0 to 40 wt %. The pristine WBPU and hybrid latex samples containing 10, 20, and 30 wt % of acrylic monomer showed unimodal distributions, whereas the hybrid sample having 40 wt % acrylic monomer content displayed a bimodal distribution with the broadest breadth. As acrylic monomer content increased, the yield point of stress–strain curve, hardness, glass transition, and water resistance of hybrid film samples increased, whereas their abrasion resistance, elongation at break, and elasticity decreased. The tensile strength of hybrid film samples (10–30 wt % of acrylic monomer content) was almost the same as that of pristine WBPU film sample, indicating the intimate molecular mixing between poly(urethane‐urea) and polyacrylate molecules in hybrids. However, the hybrid sample having 40 wt % acrylic monomer showed significantly diminished performance, which might be due to the deviation from intimate molecular mixing. From these results, the optimum acrylic monomer content was found to be about 30 wt %, which realized reasonably advantages of both poly(urethane‐urea) and acrylic polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Shape control synthesis of polymeric hybrid nanoparticles via surface‐initiated atom‐transfer radical polymerization

Polymeric hybrid nanoparticles were synthesized via surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) method on the surface of gold nanoparticles in cyclohexanone. Tetraoctyl ammonium bromide (TOAB) as a phase transfer agent was used to transfer the gold nanoparticles into cyclohexanone, which will be replaced by disulfide initiator on the surface of gold nanoparticles. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV–vis spectroscopy were utilized to characterize the product to make sure the experiment had been conducted. The results showed that the polymeric gold hybrid nanoparticles with different structures could be controlled by adjusting the ratio of initiator and gold nanoparticles in ATRP. If the ratio is very little, asymmetric polystyrene–gold hybrid nanoparticles were synthesized, and a single gold nanoparticle was attached with a polystyrene sphere. If the ratio becomes larger, core–shell polystyrene–gold nanocomposite particles were obtained resulting in gold nanoparticle encapsulated by a uniform polymer shell. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43584.     

Emulsifier‐free cationic latexes based on vinylbenzyl chloride and 2‐(dimethylamino)ethyl methacrylate with adjusted hydrophilic–hydrophobic properties

Functional emulsifier‐free cationic latexes based on styrenic monomer vinylbenzyl chloride (VBC) and acrylic monomer 2‐(dimethylamino)ethyl methacrylate (DMA) were successfully prepared with dual quaternary ammonium ions (36–63 mol %) on both monomer moieties in two‐stages. First, [2‐(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer (DMA(C₁₆)), prepared via quaternization of DMA with 1‐bromohexadecane, was utilized as a comonomer (5–20%) as well as a surfactant in the emulsion polymerization of VBC. Next, the quaternization of chloromethyl groups in the VBC moiety in latex particles with trimethylamine and N,N‐dimethylhexadecylamine created a second type of quaternized sites on the latex particles. The percentages of the quaternary ammonium ions of the first‐stage latexes (P[VBC‐DMA(C₁₆‐x)]) and the second‐stage latexes (P[VBC(R)‐DMA(C₁₆‐x)]) were determined using bromide and chloride ion‐selective electrodes. The particles were characterized with a scanning electron microscope, Zetasizer, measuring water contact angles of their pellets. The polymer structure and the alkyl group length in their quaternary ammonium ions played an important role on the sizes, zeta potentials and hydrophilic–hydrophobic balances of the latexes. The water contact angles of the pellets of the latex particles varied from 50.3 to 109.6° depending on both the polymer structure and the alkyl group length. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42775.     

The Preparation of Core–Shell P(St-MMA)–SiO2 Hybrid Nanoparticles and Filling in the Styrene/n-butyl Acrylate Adhesive

In this study, core–shell poly(styrene-methyl methacrylate) (P(St-MMA))–SiO₂ hybrid nanoparticles were prepared successfully by emulsion polymerization. Firstly, nanosilica particles were modified by oleic acid (OA) in order to introduce the polymerization active vinyl groups and hydrophobic groups onto the nanosilica. This was followed by graft copolymerization onto the modified nanosilica particles to obtain P(St-MMA)–SiO₂ hybrid nanoparticles. The hybrid nanoparticles were characterized by: transmission electron microscope (TEM); Fourier transform infrared spectroscopy (FT-IR); dynamic light scattering (DLS); and thermal gravimetric analysis (TGA). The results indicate that the hybrid particles had a regular spherical morphology with a diameter ranging from 50 to 80 nm. A reasonable mechanism for the preparation of the core–shell hybrid nanocomposites was presented. The obtained hybrid nanoparticles were subsequently (incorporated into) filled in the poly(styrene-n-butyl acrylate) (PSBA) latex. The effect of (hybrid nanoparticle concentration) filling content on the physicochemical properties of PSBA latex and the resulting node strength per monofilanment of the fibre glass gridding cloth was investigated. The results indicated that the node strength/monofilanment of the fibre glass gridding cloth coated with the PBSA latex filled with 1.0 wt% hybrid nanoparticles demonstrated greatest improvement among all the investigated PSBA latex. This result is related to the rheological properties of the latex. Moreover, the water-resistance property of PSBA composite film was found to be enhanced when compared with that of unfilled PSBA film.     

Synthesis and properties of fluorine–silicon modified polyacrylate hybrid latex particles with core–shell structure obtained via emulsifier‐free emulsion polymerization

A core–shell fluorine–silicon modified polyacrylate hybrid latex was successfully prepared via emulsifier‐free emulsion polymerization. The chemical composition and core–shell morphology of the resultant hybrid particles were investigated using ¹H NMR and Fourier transform infrared spectroscopies and transmission electron microscopy (TEM), respectively. TEM analysis indicated that the core–shell hybrid particles were uniform with narrow size distributions. The particle size and zeta potential decreased with an increase of alkylvinylsulfonate surfactant from 2.5 to 6.0 wt%. X‐ray photoelectron spectroscopy revealed that fluorine concentrated preferentially at the film surface during a film‐formation process. The film formed from the fluorine–silicon modified polyacrylate showed much higher thermal stability than a film formed from polyacrylate and fluorine‐modified polyacrylate. Contact angle results showed that a finished fabric had remarkable water repellency. © 2015 Society of Chemical Industry     

Fabrication and apparent kinetic study of poly(methyl methacrylate)/poly(octyl acrylate) and poly(octyl acrylate)/poly(methyl methacrylate) latex interpenetrating polymer networks

Two latex interpenetrating polymer networks (LIPNs) were synthesized with methyl methacrylate (MMA) and octyl acrylate (OA) as monomers, respectively. The apparent kinetics of polymerization for the LIPNs was studied. This demonstrates that network II does not have a nucleus formation stage. The monomers of network II were diffused into the latex particles of network I and then formed network II by in situ polymerization. It indicates that the polymerization of network I obeys the classical kinetic rules of emulsion polymerization. But the polymerization of network II only appears a constant‐rate stage and a decreasing‐rate stage. The apparent activation energies (E_a) of network I and network II of PMMA/POA were calculated according to the Arrhenius equation. The E_a values of POA as network I (62 kJ/mol) is similar to that of POA as network II PMMA/POA (60 kJ/mol). However, the E_a value of PMMA as network II POA/PMMA (105kJ/mol) is higher than that of PMMA as network I (61 kJ/mol). Results show that the E_a value of the network II polymerization is related to the properties of its seed latex. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010