Nitrogen‐Enriched Carbon/CNT Composites Based on Schiff‐Base Networks: Ultrahigh N Content and Enhanced Lithium Storage Properties

To improve the electrochemical performance of carbonaceous anodes for lithium ion batteries (LIBs), the incorporation of both well‐defined heteroatom species and the controllable 3D porous networks are urgently required. In this work, a novel N‐enriched carbon/carbon nanotube composite (NEC/CNT) through a chemically induced precursor‐controlled pyrolysis approach is developed. Instead of conventional N‐containing sources or precursors, Schiff‐base network (SNW‐1) enables the desirable combination of a 3D polymer with intrinsic microporosity and ultrahigh N‐content, which can significantly promote the fast transport of both Li⁺ and electron. Significantly, the strong interaction between carbon skeleton and nitrogen atoms enables the retention of ultrahigh N‐content up to 21 wt% in the resultant NEC/CNT, which exhibits a super‐high capacity (1050 mAh g^?1) for 1000 cycles and excellent rate performance (500 mAh g^?1 at a current density of 5 A g^?1) as the anode material for LIBs. The NEC/CNT composite affords a new model system as well as a totally different insight for deeply understanding the relationship between chemical structures and lithium ion storage properties, in which chemistry may play a more important role than previously expected.     

Scalable 2D Mesoporous Silicon Nanosheets for High‐Performance Lithium‐Ion Battery Anode

Constructing unique mesoporous 2D Si nanostructures to shorten the lithium‐ion diffusion pathway, facilitate interfacial charge transfer, and enlarge the electrode–electrolyte interface offers exciting opportunities in future high‐performance lithium‐ion batteries. However, simultaneous realization of 2D and mesoporous structures for Si material is quite difficult due to its non‐van der Waals structure. Here, the coexistence of both mesoporous and 2D ultrathin nanosheets in the Si anodes and considerably high surface area (381.6 m² g^?1) are successfully achieved by a scalable and cost‐efficient method. After being encapsulated with the homogeneous carbon layer, the Si/C nanocomposite anodes achieve outstanding reversible capacity, high cycle stability, and excellent rate capability. In particular, the reversible capacity reaches 1072.2 mA h g^?1 at 4 A g^?1 even after 500 cycles. The obvious enhancements can be attributed to the synergistic effect between the unique 2D mesoporous nanostructure and carbon capsulation. Furthermore, full‐cell evaluations indicate that the unique Si/C nanostructures have a great potential in the next‐generation lithium‐ion battery. These findings not only greatly improve the electrochemical performances of Si anode, but also shine some light on designing the unique nanomaterials for various energy devices.     

Ultra‐High Pyridinic N‐Doped Porous Carbon Monolith Enabling High‐Capacity K‐Ion Battery Anodes for Both Half‐Cell and Full‐Cell Applications

An ultrahigh pyridinic N‐content‐doped porous carbon monolith is reported, and the content of pyridinic N reaches up to 10.1% in overall material (53.4 ± 0.9% out of 18.9 ± 0.4% N content), being higher than most of previously reported N‐doping carbonaceous materials, which exhibit greatly improved electrochemical performance for potassium storage, especially in term of the high reversible capacity. Remarkably, the pyridinic N‐doped porous carbon monolith (PNCM) electrode exhibits high initial charge capacity of 487 mAh g^?1 at a current density of 20 mA g^?1, which is one of the highest reversible capacities among all carbonaceous anodes for K‐ion batteries. Moreover, the K‐ion full cell is successfully assembled, demonstrating a high practical energy density of 153.5 Wh kg^?1. These results make PNCM promising for practical application in energy storage devices and encourage more investigations on a similar potassium storage system.     

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated,Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Sodium‐ion batteries (SIBs) are considered promising next‐generation energy storage devices. However, a lack of appropriate high‐performance anode materials has prevented further improvements. Here, a hierarchical porous hybrid nanosheet composed of interconnected uniform TiO₂ nanoparticles and nitrogen‐doped graphene layer networks (TiO₂@NFG HPHNSs) that are synthesized using dual‐functional C₃N₄ nanosheets as both the self‐sacrificing template and hybrid carbon source is reported. These HPHNSs deliver high reversible capacities of 146 mA h g^?1 at 5 C for 8000 cycles, 129 mA h g^?1 at 10 C for 20 000 cycles, and 116 mA h g^?1 at 20 C for 10 000 cycles, as well as an ultrahigh rate capability up to 60 C with a capacity of 101 mA h g^?1. These results demonstrate the longest cyclabilities and best rate capability ever reported for TiO₂‐based anode materials for SIBs. The unprecedented sodium storage performance of the TiO₂@NFG HPHNSs is due to their unique composition and hierarchical porous 2D structure.     

Flexible 3D Porous MXene Foam for High‐Performance Lithium‐Ion Batteries

2D transition‐metal carbides and nitrides, named MXenes, are promising materials for energy storage, but suffer from aggregation and restacking of the 2D nanosheets, which limits their electrochemical performance. In order to overcome this problem and realize the full potential of MXene nanosheets, a 3D MXene foam with developed porous structure is established via a simple sulfur‐template method, which is freestanding, flexible, and highly conductive, and can be directly used as the electrode in lithium‐ion batteries. The 3D porous architecture of the MXene foam offers massive active sites to enhance the lithium storage capacity. Moreover, its foam structure facilitates electrolyte infiltration for fast Li⁺ transfer. As a result, this flexible 3D porous MXene foam exhibits significantly enhanced capacity of 455.5 mAh g^?1 at 50 mA g^?1, excellent rate performance (101 mAh g^?1 at 18 A g^?1), and superior ultralong‐term cycle stability (220 mAh g^?1 at 1 A g^?1 after 3500 cycles). This work not only demonstrates the great superiority of the 3D porous MXene foam but also proposes the sulfur‐template method for controllable constructing of the 3D foam from 2D nanosheets at a relatively low temperature.     

3D Graphene Networks Encapsulated with Ultrathin SnS Nanosheets@Hollow Mesoporous Carbon Spheres Nanocomposite with Pseudocapacitance‐Enhanced Lithium and Sodium Storage Kinetics

The lithium and sodium storage performances of SnS anode often undergo rapid capacity decay and poor rate capability owing to its huge volume fluctuation and structural instability upon the repeated charge/discharge processes. Herein, a novel and versatile method is described for in situ synthesis of ultrathin SnS nanosheets inside and outside hollow mesoporous carbon spheres crosslinked reduced graphene oxide networks. Thus, 3D honeycomb‐like network architecture is formed. Systematic electrochemical studies manifest that this nanocomposite as anode material for lithium‐ion batteries delivers a high charge capacity of 1027 mAh g^?1 at 0.2 A g^?1 after 100 cycles. Meanwhile, the as‐developed nanocomposite still retains a charge capacity of 524 mAh g^?1 at 0.1 A g^?1 after 100 cycles for sodium‐ion batteries. In addition, the electrochemical kinetics analysis verifies the basic principles of enhanced rate capacity. The appealing electrochemical performance for both lithium‐ion batteries and sodium‐ion batteries can be mainly related to the porous 3D interconnected architecture, in which the nanoscale SnS nanosheets not only offer decreased ion diffusion pathways and fast Li⁺/Na⁺ transport kinetics, but also the 3D interconnected conductive networks constructed from the hollow mesoporous carbon spheres and reduced graphene oxide enhance the conductivity and ensure the structural integrity.     

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual‐Doped Hard Carbon in Capacitive Potassium‐Ion Storage

The intercalation of potassium ions into graphite is demonstrated to be feasible, while the electrochemical performance of potassium‐ion batteries (KIBs) remains unsatisfying. More effort is needed to improve the specific capacity while maintaining a superior rate capability. As an attempt, nitrogen/oxygen dual‐doped hierarchical porous hard carbon (NOHPHC) is introduced as the anode in KIBs by carbonizing and acidizing the NH₂‐MIL‐101(Al) precursor. Specifically, the NOHPHC electrode delivers high reversible capacities of 365 and 118 mA h g^?1 at 25 and 3000 mA g^?1, respectively. The capacity retention reaches 69.5% at 1050 mA g^?1 for 1100 cycles. The reasons for the enhanced electrochemical performance, such as the high capacity, good cycling stability, and superior rate capability, are analyzed qualitatively and quantitatively. Quantitative analysis reveals that mixed mechanisms, including capacitance and diffusion, account for the K‐ion storage, in which the capacitance plays a more important role. Specifically, the enhanced interlayer spacing (0.39 nm) enables the intercalation of large K ions, while the high specific surface area of ≈1030 m² g^?1 and the dual‐heteroatom doping (N and O) are conducive to the reversible adsorption of K ions.     

Hierarchical Composite of Rose‐Like VS2@S/N‐Doped Carbon with Expanded (001) Planes for Superior Li‐Ion Storage

In the present work, a hierarchical composite of rose‐like VS₂@S/N‐doped carbon (VS₂@SNC) with expanded (001) planes is successfully fabricated through a facile synthetic route. Notably, the d‐spacing of (001) planes is expanded to 0.92 nm, which is proved to dramatically reduce the energy barrier for Li⁺ diffusion in the composite of VS₂@SNC by density functional theory calculation. On the other hand, the S/N‐doped carbon in the composite greatly promotes the electrical conductivity and enhances the structural stability. In addition, the hierarchical structure of VS₂@SNC facilitates rapid electrolyte diffusion and increases the contact area between the electrode and electrolyte simultaneously. Benefiting from the merits mentioned above, the VS₂@SNC electrode exhibits excellent electrochemical properties, such as a large reversible capacity of 971.6 mA h g^?1 at 0.2 A g^?1, an extremely high rate capability of 772.1 mA h g^?1 at 10 A g^?1, and a remarkable cycling stability up to 600 cycles at 8 A g^?1 with a capacity of 684.5 mA h g^?1, making it a promising candidate as an anode material for lithium‐ion batteries.     

Ultrathin Nanosheet Assembled Sn0.91Co0.19S2 Nanocages with Exposed (100) Facets for High‐Performance Lithium‐Ion Batteries

Ultrathin 2D inorganic nanomaterials are good candidates for lithium‐ion batteries, as well as the micro/nanocage structures with unique and tunable morphologies. Meanwhile, as a cost‐effective method, chemical doping plays a vital role in manipulating physical and chemical properties of metal oxides and sulfides. Thus, the design of ultrathin, hollow, and chemical doped metal sulfides shows great promise for the application of Li‐ion batteries by shortening the diffusion pathway of Li ions as well as minimizing the electrode volume change. Herein, ultrathin nanosheet assembled Sn_0.91Co_0.19S₂ nanocages with exposed (100) facets are first synthesized. The as‐prepared electrode delivers an excellent discharge capacity of 809 mA h g^?1 at a current density of 100 mA g^?1 with a 91% retention after 60 discharge–charge cycles. The electrochemical performance reveals that the Li‐ion batteries prepared by Sn_0.91Co_0.19S₂ nanocages have high capacity and great cycling stability.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Metallic Graphene‐Like VSe2 Ultrathin Nanosheets: Superior Potassium‐Ion Storage and Their Working Mechanism

Potassium‐ion batteries (KIBs) are receiving increasing interest in grid‐scale energy storage owing to the earth abundant and low cost of potassium resources. However, their development still stays at the infancy stage due to the lack of suitable electrode materials with reversible depotassiation/potassiation behavior, resulting in poor rate performance, low capacity, and cycling stability. Herein, the first example of synthesizing single‐crystalline metallic graphene‐like VSe₂ nanosheets for greatly boosting the performance of KIBs in term of capacity, rate capability, and cycling stability is reported. Benefiting from the unique 2D nanostructure, high electron/K⁺‐ion conductivity, and outstanding pseudocapacitance effects, ultrathin VSe₂ nanosheets show a very high reversible capacity of 366 mAh g^?1 at 100 mA g^?1, a high rate capability of 169 mAh g^?1 at 2000 mA g^?1, and a very low decay of 0.025% per cycle over 500 cycles, which are the best in all the reported anode materials in KIBs. The first‐principles calculations reveal that VSe₂ nanosheets have large adsorption energy and low diffusion barriers for the intercalation of K⁺‐ion. Ex situ X‐ray diffraction analysis indicates that VSe₂ nanosheets undertake a reversible phase evolution by initially proceeding with the K⁺‐ion insertion within VSe₂ layers, followed by the conversion reaction mechanism.     

Peapod‐like Li3VO4/N‐Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High‐Energy Lithium‐Ion Capacitors

Lithium ion capacitors are new energy storage devices combining the complementary features of both electric double‐layer capacitors and lithium ion batteries. A key limitation to this technology is the kinetic imbalance between the Faradaic insertion electrode and capacitive electrode. Here, we demonstrate that the Li₃VO₄ with low Li‐ion insertion voltage and fast kinetics can be favorably used for lithium ion capacitors. N‐doped carbon‐encapsulated Li₃VO₄ nanowires are synthesized through a morphology‐inheritance route, displaying a low insertion voltage between 0.2 and 1.0 V, a high reversible capacity of ≈400 mAh g^?1 at 0.1 A g^?1, excellent rate capability, and long‐term cycling stability. Benefiting from the small nanoparticles, low energy diffusion barrier and highly localized charge‐transfer, the Li₃VO₄/N‐doped carbon nanowires exhibit a high‐rate pseudocapacitive behavior. A lithium ion capacitor device based on these Li₃VO₄/N‐doped carbon nanowires delivers a high energy density of 136.4 Wh kg^?1 at a power density of 532 W kg^?1, revealing the potential for application in high‐performance and long life energy storage devices.     

Solvent‐Exchange Strategy toward Aqueous Dispersible MoS2 Nanosheets and Their Nitrogen‐Rich Carbon Sphere Nanocomposites for Efficient Lithium/Sodium Ion Storage

Major challenges in developing 2D transition‐metal disulfides (TMDs) as anode materials for lithium/sodium ion batteries (LIBs/SIBs) lie in rational design and targeted synthesis of TMD‐based nanocomposite structures with precisely controlled ion and electron transport. Herein, a general and scalable solvent‐exchange strategy is presented for uniform dispersion of few‐layer MoS₂ (f‐MoS₂) from high‐boiling‐point solvents (N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethyl formaldehyde (DMF), etc.) into low‐boiling‐point solvents (water, ethanol, etc.). The solvent‐exchange strategy dramatically simplifies high‐yield production of dispersible MoS₂ nanosheets as well as facilitates subsequent decoration of MoS₂ for various applications. As a demonstration, MoS₂‐decorated nitrogen‐rich carbon spheres (MoS₂‐NCS) are prepared via in situ growth of polypyrrole and subsequent pyrolysis. Benefiting from its ultrathin feature, largely exposed active surface, highly conductive framework and excellent structural integrity, the 2D core–shell architecture of MoS₂‐NCS exhibits an outstanding reversible capacity and excellent cycling performance, achieving high initial discharge capacity of 1087.5 and 508.6 mA h g^?1 at 0.1 A g^?1, capacity retentions of 95.6% and 94.2% after 500 and 250 charge/discharge cycles at 1 A g^?1, for lithium/sodium ion storages, respectively.     

A Universal Strategy for Hollow Metal Oxide Nanoparticles Encapsulated into B/N Co‐Doped Graphitic Nanotubes as High‐Performance Lithium‐Ion Battery Anodes

Yolk–shell nanostructures have received great attention for boosting the performance of lithium‐ion batteries because of their obvious advantages in solving the problems associated with large volume change, low conductivity, and short diffusion path for Li⁺ ion transport. A universal strategy for making hollow transition metal oxide (TMO) nanoparticles (NPs) encapsulated into B, N co‐doped graphitic nanotubes (TMO@BNG (TMO = CoO, Ni₂O₃, Mn₃O₄) through combining pyrolysis with an oxidation method is reported herein. The as‐made TMO@BNG exhibits the TMO‐dependent lithium‐ion storage ability, in which CoO@BNG nanotubes exhibit highest lithium‐ion storage capacity of 1554 mA h g^?1 at the current density of 96 mA g^?1, good rate ability (410 mA h g^?1 at 1.75 A g^?1), and high stability (almost 96% storage capacity retention after 480 cycles). The present work highlights the importance of introducing hollow TMO NPs with thin wall into BNG with large surface area for boosting LIBs in the terms of storage capacity, rate capability, and cycling stability.     

Reactive Oxygen‐Doped 3D Interdigital Carbonaceous Materials for Li and Na Ion Batteries

Carbonaceous materials as anodes usually exhibit low capacity for lithium ion batteries (LIBs) and sodium ion batteries (SIBs). Oxygen‐doped carbonaceous materials have the potential of high capacity and super rate performance. However, up to now, the reported oxygen‐doped carbonaceous materials usually exhibit inferior electrochemical performance. To overcome this problem, a high reactive oxygen‐doped 3D interdigital porous carbonaceous material is designed and synthesized through epitaxial growth method and used as anodes for LIBs and SIBs. It delivers high reversible capacity, super rate performance, and long cycling stability (473 mA h g^?1after 500 cycles for LIBs and 223 mA h g^?1 after 1200 cycles for SIBs, respectively, at the current density of 1000 mA g^?1), with a capacity decay of 0.0214% per cycle for LIBs and 0.0155% per cycle for SIBs. The results demonstrate that constructing 3D interdigital porous structure with reactive oxygen functional groups can significantly enhance the electrochemical performance of oxygen‐doped carbonaceous material.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

3D Sulfur and Nitrogen Codoped Carbon Nanofiber Aerogels with Optimized Electronic Structure and Enlarged Interlayer Spacing Boost Potassium‐Ion Storage

Carbonaceous materials are promising anodes for potassium‐ion batteries (PIBs). However, it is hard for large K ions (1.38 Å) to achieve long‐distance diffusion in pristine carbonaceous materials. In this work, the following are synthesized: S/N codoped carbon nanofiber aerogels (S/N‐CNFAs) with optimized electronic structure by S/N codoping, enhanced interlayer spacing by S doping, and a 3D interconnected porous structure of aerogel, through a pyrolysis sustainable seaweed (Fe‐alginate) aerogel strategy. Specifically, the S/N‐CNFAs electrode delivers high reversible capacities of 356 and 112 mA h g^?1 at 100 and 5000 mA g^?1, respectively. The capacity reaches 168 mA h g^?1 at 2000 mA g^?1 after 1000 cycles. A full cell with a S/N‐CNFAs anode and potassium prussian blue cathode displays a specific capacity of 198 mA h g^?1 at 200 mA g^?1. Density functional theory calculations indicate that S/N codoping is beneficial to synergistically improve K ions storage of S/N‐CNFAs by enhancing the adsorption of K ions and reducing the diffusion barrier of K ions. This work offers a facile heteroatom doping paradigm for designing new carbonaceous anodes for high‐performance PIBs.     

3D Interconnected and Multiwalled Carbon@MoS2@Carbon Hollow Nanocables as Outstanding Anodes for Na‐Ion Batteries

Currently, the specific capacity and cycling performance of various MoS₂/carbon‐based anode materials for Na‐ion storage are far from satisfactory due to the insufficient structural stability of the electrode, incomplete protection of MoS₂ by carbon, difficult access of electrolyte to the electrode interior, as well as inactivity of the adopted carbon matrix. To address these issues, this work presents the rational design and synthesis of 3D interconnected and hollow nanocables composed of multiwalled carbon@MoS₂@carbon. In this architecture, (i) the 3D nanoweb‐like structure brings about excellent mechanical property of the electrode, (ii) the ultrathin MoS₂ nanosheets are sandwiched between and doubly protected by two layers of porous carbon, (iii) the hollow structure of the primary nanofibers facilitates the access of electrolyte to the electrode interior, (iv) the porous and nitrogen‐doping properties of the two carbon materials lead to synergistic Na‐storage of carbon and MoS₂. As a result, this hybrid material as the anode material of Na‐ion battery exhibits fast charge‐transfer reaction, high utilization efficiency, and ultrastability. Outstanding reversible capacity (1045 mAh g^?1), excellent rate behavior (817 mAh g^?1 at 7000 mA g^?1), and good cycling performance (747 mAh g^?1 after 200 cycles at 700 mA g^?1) are obtained.     

Strong Coupling of MoS2 Nanosheets and Nitrogen‐Doped Graphene for High‐Performance Pseudocapacitance Lithium Storage

Layered material MoS₂ is widely applied as a promising anode for lithium‐ion batteries (LIBs). Herein, a scalable and facile dopamine‐assisted hydrothermal technique for the preparation of strongly coupled MoS₂ nanosheets and nitrogen‐doped graphene (MoS₂/N‐G) composite is developed. In this composite, the interconnected MoS₂ nanosheets are well wrapped onto the surface of graphene, forming a unique veil‐like architecture. Experimental results indicate that dopamine plays multiple roles in the synthesis: a binding agent to anchor and uniformly disperse MoS₂ nanosheets, a morphology promoter, and the precursor for in situ nitrogen doping during the self‐polymerization process. Density functional theory calculations further reveal that a strong interaction exists at the interface of MoS₂ nanosheets and nitrogen‐doped graphene, which facilitates the charge transfer in the hybrid system. When used as the anode for LIBs, the resulting MoS₂/N‐G composite electrode exhibits much higher and more stable Li‐ion storage capacity (e.g., 1102 mAh g^?1 at 100 mA g^?1) than that of MoS₂/G electrode without employing the dopamine linker. Significantly, it is also identified that the thin MoS₂ nanosheets display outstanding high‐rate capability due to surface‐dominated pseudocapacitance contribution.     

A Flexible Sulfur‐Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage

Heteroatom doping is regarded as a promising method to enhance the sodium storage performance of carbon materials. In this work, a sulfur‐enriched N‐doped multichannel hollow carbon nanofiber (denoted as S‐NCNF) film is prepared through electrospinning technology and heat treatment with sublimed sulfur as the flexible anode for sodium ion batteries (NIBs). The S‐NCNF film displays outstanding electrochemical performance, particularly with a high rate capacity (132 mA h g^?1 at the current density of 10 A g^?1) and remarkable long cycling stability (reversible specific capacity of 187 mA h g^?1 at 2 A g^?1 over 2000 cycles). The improved sodium storage performance results from the unique 3D structure, abundant defects, and increased interlayer spacing of S‐NCNFs. The density functional theory calculations demonstrate that nitrogenous carbon nanofibers doping with sulfur could not only promote the adsorption of sodium but also favor electrons' transfer. This strategy has been demonstrated as a general process to design free‐standing carbon‐based thin film with other heteroatom doping.