A heuristic training-based least squares support vector machines for power system stabilization by SMES

This paper presents the application of least squares support vector machines (LS-SVMs) to design of an adaptive damping controller for superconducting magnetic energy storage (SMES). To accelerate LS-SVMs training and testing, a large amount of training data set of a multi-machine power system is reduced by the measurement of similarity among samples. In addition, the redundant data in the training set can be significantly discarded. The LS-SVM for SMES controllers are trained using the optimal LS-SVM parameters optimized by a particle swarm optimization and the reduced data. The LS-SVM control signals can be adapted by various operating conditions and different disturbances. Simulation results in a two-area four-machine power system demonstrate that the proposed LS-SVM for SMES controller is robust to various disturbances under a wide range of operating conditions in comparison to the conventional SMES.     

An advanced FMRL controller for FACTS devices to enhance dynamic performance of power systems

The parameters of power system slowly change with time due to environmental effects or may change rapidly due to faults. It is preferable that the control technique in this system possesses robustness for various fault conditions and disturbances. The used flexible alternating current transmission system (FACTS) in this paper is an advanced super-conducting magnetic energy storage (ASMES). Many control techniques that use ASMES to improve power system stability have been proposed. While fuzzy controller has proven its value in some applications, the researches applying fuzzy controller with ASMES have been actively reported. However, it is sometimes very difficult to specify the rule base for some plants, when the parameters change. To solve this problem, a fuzzy model reference learning controller (FMRLC) is proposed in this paper, which investigates multi-input multi-output FMRLC for time-variant nonlinear system. This control method provides the motivation for adaptive fuzzy control, where the focus is on the automatic online synthesis and tuning of fuzzy controller parameters (i.e., using online data to continually learn the fuzzy controller that will ensure that the performance objectives are met). Simulation results show that the proposed robust controller is able to work with nonlinear and nonstationary power system (i.e., single machine-infinite bus (SMIB) system), under various fault conditions and disturbances.     

Differential evolutionary algorithm for TCSC-based controller design

In this paper, a systematic procedure for modelling, simulation and optimal tuning the parameters of a thyristor controlled series compensator (TCSC) controller, for the power system stability enhancement is presented. The design problem of the proposed controller is formulated as an optimization problem and differential evolution (DE) is employed to search for optimal controller parameters. A detailed analysis on the selection of objective function and controller structure on the effectiveness of the TCSC controller is carried out and simulation results are presented. The dynamic performance TCSC controller under various loading and disturbance conditions are analyzed and compared. Finally, the proposed design approach is extended to a multi-machine power system for simultaneous design of multiple and multi-type controllers.     

Robust adaptive fuzzy logic power system stabilizer

This paper introduces a robust adaptive fuzzy controller as a power system stabilizer (RFPSS) used to damp inter-area modes of oscillation following disturbances in power systems. In contrast to the IEEE standard multi-band power system stabilizer (MB-PSS), robust adaptive fuzzy-based stabilizers are more efficient because they cope with oscillations at different operating points. The proposed controller adopts a dynamic inversion approach. Since feedback linearization is practically imperfect, components that ensure robust and adaptive performance are included in the control law to compensate for modelling errors and achieve acceptable tracking errors. Two fuzzy systems are implemented. The first system models the nominal values of the system’s nonlinearities. The second system is an adaptive one that compensates for modelling errors. A feedback linearization-based control law is implemented using the identified model. The gains of the controller are tuned via a particle swarm optimization routine to ensure system stability and minimum sum of the squares of the speed deviations. A bench-mark problem of a 4-machine 2-area power system is used to demonstrate the performance of the proposed controller and to show its superiority over other conventional stabilizers used in the literature.     

An evolutionary approach to design practical μ synthesis controllers

This paper proposes an evolutionary approach to solve μ synthesis problem. The goal is to achieve low order, practical μ synthesis controllers without any order reduction. In the proposed approach µ synthesis problem is solved as a constraint optimization problem in which robust stability and robust performance based on μ analysis are considered as the constraint and the cost function respectively. In order to solve the optimization problem an improved particle swarm optimization (PSO) is chosen to find the required coefficients of a structure-specified controller. The performance and robustness of the proposed controller are investigated by an uncertain mass-damper-spring system and is compared with the D-K iteration controller (the conventional solution to μ synthesis problem). Simulation results demonstrate the advantages of the proposed controller in terms of simple structure and robustness against plant perturbations and disturbances in comparison with D-K iteration controller.     

Improved Design of Interval Type-2 Fuzzy based Wide Area Power System Stabilizer for Inter-area Oscillation Damping

The interconnection of power system due to the ever-time increase in power demand has caused inter-area oscillations as a challenge to power system stability. The present paper proposes the novel design of an Interval Type-2 Fuzzy based Wide Area Power System Stabilizer to damp the inter-area mode of oscillations for improving the power system stability. The usage of Wide Area Measurement Systems for continuous monitoring of the power grid plays a significant role in maintaining the stability of the power grid. The proposed controller uses wide-area signals from WAMS as the input signals. The controllability index calculation performs the selection of the most affected wide-area signals. The participation factor is used to identify the location of the controller. Sliding Surface approach is introduced in the controller to upgrade the performance of the controller during different operating conditions. The sliding surface approach has made the system insensitive to the parameter variations. The interval type-2 fuzzy control is a model-free approach with better control performance, due to its higher degree of freedom of interval type-2 fuzzy sets. Finally, the optimal tuning of sliding surface parameters has been considered as an optimization problem with the minimization of Integral Time Square Error using Real Coded Genetic Algorithm to enhance the damping control. The proposed Fuzzy controller has been tested in two area, four machine, 11 bus IEEE benchmark system. From the simulation responses and the comparison with different controllers, the proposed controller shows robustness and effectiveness with more accurate dynamic response and better damping of inter-area oscillations under different system operating conditions and load perturbations.     

考虑输入饱和的近空间飞行器姿态容错控制

针对近空间飞行器姿态控制中出现的执行器故障,输入饱和与外部干扰等问题,设计了一种基于二阶滑模干扰观测器和辅助系统的鲁棒容错跟踪控制方法.首先,将系统不确定,外部扰动和执行器故障作为复合干扰,设计super-twisting二阶滑模干扰观测器对其进行估计.然后为解决输入饱和问题构造了辅助分析系统,并借助backstepping方法,设计姿态容错跟踪控制器.利用Lyapunov方法,严格证明了所有闭环系统信号的收敛性.最后将所设计的控制方法应用于近空间飞行器姿态控制中,仿真结果验证了该控制方法的有效性.     

Evolutionary algorithm based optimization for power quality disturbances classification using support vector machines

Classification and detection of power signal disturbances are most essential to ensure the good power quality. The power disturbance signals are non-stationary in nature. Non-stationary signal classification is a complex problem and equally a difficult task. In this paper we present a new method for accurate classification of power quality signals using Support Vector Machines (SVM) with Optimized Time-Frequency Kernels by a stochastic genetic algorithm. The Cohen’s class of time-frequency-transformation has been chosen as the Kernel for the SVM. An Evolutionary Algorithm has been used to optimize the parameters of the Kernels. The proposed classification method with optimized parameters is promising for classification of such non-stationary signals. Comparative simulation results demonstrate a significant improvement in the classification accuracy in case of these optimized Kernels. The important contribution of the paper is the optimization of the Kernels for the power system signal classification problem.     

Comparison of particle swarm optimization and genetic algorithm for FACTS-based controller design

Recently, genetic algorithms (GA) and particle swarm optimization (PSO) technique have attracted considerable attention among various modern heuristic optimization techniques. The GA has been popular in academia and the industry mainly because of its intuitiveness, ease of implementation, and the ability to effectively solve highly non-linear, mixed integer optimization problems that are typical of complex engineering systems. PSO technique is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. Since the two approaches are supposed to find a solution to a given objective function but employ different strategies and computational effort, it is appropriate to compare their performance. This paper presents the application and performance comparison of PSO and GA optimization techniques, for flexible ac transmission system (FACTS)-based controller design. The design objective is to enhance the power system stability. The design problem of the FACTS-based controller is formulated as an optimization problem and both PSO and GA optimization techniques are employed to search for optimal controller parameters. The performance of both optimization techniques in terms of computational effort, computational time and convergence rate is compared. Further, the optimized controllers are tested on a weakly connected power system subjected to different disturbances over a wide range of loading conditions and parameter variations and their performance is compared with the conventional power system stabilizer (CPSS). The eigenvalue analysis and non-linear simulation results are presented and compared to show the effectiveness of both the techniques in designing a FACTS-based controller, to enhance power system stability.     

基于自适应模糊滑模控制的船舶航向控制器设计

针对船舶运动系统中固有的非线性、模型不确定性和风、浪、流等的干扰.提出了自适应模糊滑模控制(AFSMC)策略解决船舶的航向控制问题.通过采用模糊逻辑系统逼近系统未知函数,将滑模控制技术与自适应模糊控制技术相结合,设计了船舶航向AFSMC控制器.在滑模边界层内应用PI (proportional-integral)控制代替滑模控制中的切换项,削弱了滑模控制带来的抖振现象.借助李亚普诺夫函数证明了船舶运动系统中的信号都一致有界并利用Barbalat引理证明了跟踪误差渐近收敛到零.在参数摄动和外界干扰情况下进行了航向保持与改变仿真试验,采用AFSMC控制器得到了与无摄动和无干扰情况下相似的输出响应.实验结果表明,所提控制器能有效地处理系统不确定性和外界干扰,控制性能良好,具有很强的鲁棒性.     

Observer-based Adaptive Fuzzy Backstepping Tracking Control of Quadrotor Unmanned Aerial Vehicle Powered by Li-ion Battery

In this paper, an Adaptive Fuzzy Backstepping Control (AFBC) approach with state observer is developed. This approach is used to overcome the problem of trajectory tracking for a Quadrotor Unmanned Aerial Vehicle (QUAV) under wind gust conditions and parametric uncertainties. An adaptive fuzzy controller is directly used to approximate an unknown nonlinear backstepping controller which is based on the exact model of the QUAV. Besides, a state observer is constructed to estimate the states. The stability analysis of the whole system is proved using Lyapunov direct method. Uniformly Ultimately Bounded (UUB) stability of all signals in the closed-loop system is ensured. The proposed control method guarantees the tracking of a desired trajectory, attenuates the effect of external disturbances such as wind gust, and solves the problem of unavailable states for measurement. Extended simulation studies are presented to highlight the efficiency of the proposed AFBC scheme.     

Adaptive neural prescribed performance control for a class of strict-feedback stochastic nonlinear systems under arbitrary switchings

This paper presents an adaptive neural tracking control scheme for strict-feedback stochastic nonlinear systems with guaranteed transient and steady-state performance under arbitrary switchings. First, by utilising the prescribed performance control, the prescribed tracking control performance can be ensured, while the requirement for the initial error is removed. Second, radial basis function neural networks approximation are used to handle unknown nonlinear functions and stochastic disturbances. At last, by using the common Lyapunov function method and the backstepping technique, a common adaptive neural controller is constructed. The designed controller overcomes the problem of the over-parameterisation, and further alleviates the computational burden. Under the proposed common adaptive controller, all the signals in the closed-loop system are 4-Moment (or 2 Moment) semi-globally uniformly ultimately bounded, and the prescribed tracking control performance are guaranteed under arbitrary switchings. Three examples are presented to further illustrate the effectiveness of the proposed approach.     

Robust distributed MPC for load frequency control of uncertain power systems

Reliable Load frequency control (LFC) is crucial to the operation and design of modern electric power systems. However, the power systems are always subject to uncertainties and external disturbances. Considering the LFC problem of a multi-area interconnected power system, this paper presents a robust distributed model predictive control (RDMPC) based on linear matrix inequalities. The proposed algorithm solves a series of local convex optimization problems to minimize an attractive range for a robust performance objective by using a time-varying state-feedback controller for each control area. The scheme incorporates the two critical nonlinear constraints, e.g., the generation rate constraint (GRC) and the valve limit, into convex optimization problems. Furthermore, the algorithm explores the use of an expanded group of adjustable parameters in LMI to transform an upper bound into an attractive range for reducing conservativeness. Good performance and robustness are obtained in the presence of power system dynamic uncertainties.     

基于ESO的Buck型变换器趋近律控制

针对Buck型变换器系统中存在的时变干扰,如输出负载波动,本文提出一种基于扩张状态观测器(ESO)的趋近律控制方法。首先,对系统中存在的时变干扰进行建模,把抑制时变干扰问题转换为抑制匹配和非匹配扰动问题。其次,设计一种扩张状态观测器,用于估计匹配和非匹配扰动。然后,根据提出的新型指数幂次趋近律设计滑模控制器,结合ESO,有效抑制时变干扰对系统的影响,并通过Lyapunov稳定性定理分析观测器的收敛性和闭环控制系统的稳定性。最后,仿真结果验证了所提方法的有效性。     

时变不确定性系统的二自由度最优鲁棒稳态跟踪控制器设计

研究了被控系统存在范数有界的时变模型摄动和未知外部干扰时鲁棒稳态跟踪问题. 利用二自由度控制结构和Youla参数化方法.提出了一个最坏情况稳态绝对误差的精确计算公 式,利用该公式最优稳态跟踪控制器设计问题可化为一个有限维l1优化问题.因此控制器设计 只需解一个标准线性规划问题.此外,还证明了所提出的控制器可同时保证系统的鲁棒稳定性 和最优跟踪性能.仿真结果表明了该方法的有效性和可行性.     

Teaching–learning based optimization algorithm based fuzzy-PID controller for automatic generation control of multi-area power system

This paper deals with the design of a novel fuzzy proportional–integral–derivative (PID) controller for automatic generation control (AGC) of a two unequal area interconnected thermal system. For the first time teaching–learning based optimization (TLBO) algorithm is applied in this area to obtain the parameters of the proposed fuzzy-PID controller. The design problem is formulated as an optimization problem and TLBO is employed to optimize the parameters of the fuzzy-PID controller. The superiority of proposed approach is demonstrated by comparing the results with some of the recently published approaches such as Lozi map based chaotic optimization algorithm (LCOA), genetic algorithm (GA), pattern search (PS) and simulated algorithm (SA) based PID controller for the same system under study employing the same objective function. It is observed that TLBO optimized fuzzy-PID controller gives better dynamic performance in terms of settling time, overshoot and undershoot in frequency and tie-line power deviation as compared to LCOA, GA, PS and SA based PID controllers. Further, robustness of the system is studied by varying all the system parameters from −50% to +50% in step of 25%. Analysis also reveals that TLBO optimized fuzzy-PID controller gains are quite robust and need not be reset for wide variation in system parameters.     

互联电力系统鲁棒分布式模型预测负荷频率控制

负荷频率控制是现代互联电力系统运行的重要保障.本文针对含有不确定因素和负荷扰动的多区域互联电力系统提出了一种基于线性矩阵不等式参数可调节的鲁棒分布式预测控制算法.设计各个区域控制器目标函数引入相邻区域的状态变量和输入变量,同时考虑发电机变化速率约束和阀门位置约束,将求解一组凸优化问题转化成线性矩阵不等式求解,得到各个区域的控制律,在线性矩阵不等式中引入一组可调参数,将优化一个上限值转化成优化吸引区,降低算法的保守性.仿真结果验证了该算法在负荷扰动、系统参数不确定和结构不确定性情况下具有鲁棒性.     

Study of differential search algorithm based automatic generation control of an interconnected thermal-thermal system with governor dead-band

An attempt has been made to the effective application of a recently introduced, powerful optimization technique called differential search algorithm (DSA), for the first time to solve load frequency control (LFC) problem in power system. In this paper, initially, DSA optimized classical PI/PIDF controller is implemented to an identical two-area thermal-thermal power system and then the study is extended to two more realistic power systems which are widely used in the literature. To assess the usefulness of DSA, three enhanced competitive algorithms namely comprehensive learning particle swarm optimization (CLPSO), ensemble of mutation and crossover strategies and parameters in differential evolution (EPSDE), and success history based DE (SHADE) are studied in this paper. Moreover, the superiority of proposed DSA optimized PI/PID/PIDF controller is validated by an extensive comparative analysis with some recently published meta-heuristic algorithms such as firefly algorithm (FA), bacteria foraging optimization algorithm (BFOA), genetic algorithm (GA), craziness based particle swarm optimization (CRPSO), differential evolution (DE), teaching-learning based optimization (TLBO), particle swarm optimization (PSO), and quasi-oppositional harmony search algorithm (QOHSA). A case of robustness and sensitivity analysis has been performed for the concerned test system under parametric uncertainty and random load perturbation. Furthermore, to demonstrate the efficacy of proposed DSA, the system nonlinearities like reheater of the steam turbine and governor dead band are included in the system modeling. The extensive results presented in this article demonstrate that proposed DSA can effectively improve system dynamics and may be applied to real-time LFC problem.     

Robust stability considerations in optimal design of dynamic systems under uncertainty

This paper presents a method for the incorporation of robust stability criteria in the design of dynamic systems under uncertainty. Process systems are modelled via dynamic mathematical models, variations include both uncertain parameters and time-varying disturbances, while control structure selection and controller design is considered as part of the design optimization problem. Stability criteria are included, based on the concept of the measure of a matrix, to maintain desired dynamic characteristics, in a multiperiod design formulation. A combined flexibility-stabiluty analysis step is also introduced to ensure feasible and stable operation of the dynamic system in the presence of parametric uncertainties and process disturbances. The potential of the proposed approach is illustrated with a ternary distillation column design and control problem (featuring a rigorous tray-by-tray model).