Evaluation of ethanol production by a new isolate of yeast during fermentation in synthetic medium and sugarcane bagasse hemicellulosic hydrolysate

A new xylose fermenting yeast was isolated from over-ripe banana by enrichment in xylose-containing medium. The phylogenetic analysis of ITS1-5.8S-ITS2 region sequences of ribosomal RNA of isolate BY2 revealed that it shows affiliation to genus Pichia and clades with Pichia caribbica. In batch fermentation, Pichia strain BY2 fermented xylose, producing 15 g l^?1 ethanol from 30 g l^?1 xylose under shaking conditions at 28°C, with ethanol yield of 0.5 g g^?1 and volumetric productivity of 0.31 g l^?1 h^?1. The optimum pH range for ethanol production from xylose by Pichia strain BY2 was 5–7. Pichia strain BY2 also produced 6.08 g l^?1 ethanol from 30 g l^?1 arabinose. Pichia strain BY2 can utilize sugarcane bagasse hemicellulose acid hydrolysate for alcohol production, efficiency of fermentation was improved by neutralization, and sequential use of activated charcoal adsorption method. Percent total sugar utilized and ethanol yield for the untreated hydrolysate was 17.14% w/v and 0.33 g g^?1, respectively, compared with 66.79% w/v and 0.45 g g^?1, respectively, for treated hemicellulose acid hydrolysate. This new yeast isolate showed ethanol yield of 0.45 g g^?1 and volumetric productivity of 0.33 g l^?1 h^?1 from sugarcane bagasse hemicellulose hydrolysate detoxified by neutralization and activated charcoal treatment, and has potential application in practical process of ethanol production from lignocellulosic hydrolysate.     

High-yield production of pure tagatose from fructose by a three-step enzymatic cascade reaction

Objective

To produce tagatose from fructose with a high conversion rate and to establish a high-yield purification method of tagatose from the reaction mixture.

Results

Fructose at 1 M (180 g l^?1) was converted to 0.8 M (144 g l^?1) tagatose by a three-step enzymatic cascade reaction, involving hexokinase, plus ATP, fructose-1,6-biphosphate aldolase, phytase, over 16 h with a productivity of 9 g l^?1 h^?1. No byproducts were detected. Tagatose was recrystallized from ethanol to a purity of 99.9% and a yield of 96.3%. Overall, tagatose at 99.9% purity was obtained from fructose with a yield of 77%.

Conclusion

This is the first biotechnological production of tagatose from fructose and the first application of solvent recrystallization for the purification of rare sugars.

     

Construction of lactose-consuming Saccharomyces cerevisiae for lactose fermentation into ethanol fuel

Two lactose-consuming diploid Saccharomyces cerevisiae strains, AY-51024A and AY-51024M, were constructed by expressing the LAC4 and LAC12 genes of Kluyveromyces marxianus in the host strain AY-5. In AY-51024A, both genes were targeted to the ATH1 and NTH1 gene-encoding regions to abolish the activity of acid/neutral trehalase. In AY-51024M, both genes were respectively integrated into the MIG1 and NTH1 gene-encoding regions to relieve glucose repression. Physiologic studies of the two transformants under anaerobic cultivations in glucose and galactose media indicated that the expression of both LAC genes did not physiologically burden the cells, except for AY-51024A in glucose medium. Galactose consumption was initiated at higher glucose concentrations in the MIG1 deletion strain AY-51024M than in the corresponding wild-type strain and AY-51024A, wherein galactose was consumed until glucose was completely depleted in the mixture. In lactose medium, the Sp. growth rates of AY-51024A and AY-51024M under anaerobic shake-flasks were 0.025 and 0.067 h^?1, respectively. The specific lactose uptake rate and ethanol production of AY-51024M were 2.50 g lactose g CDW^?1 h^?1 and 23.4 g l^?1, respectively, whereas those of AY-51024A were 0.98 g lactose g CDW^?1 h^?1 and 24.3 g lactose g CDW^?1 h^?1, respectively. In concentrated cheese whey powder solutions, AY-51024M produced 63.3 g l^?1 ethanol from approximately 150 g l^?1 initial lactose in 120 h, conversely, AY-51024A consumed 63.7 % of the initial lactose and produced 35.9 g l^?1 ethanol. Therefore, relieving glucose repression is an effective strategy for constructing lactose-consuming S. cerevisiae.     

Enhanced production of ethanol from glycerol by engineered Hansenula polymorpha expressing pyruvate decarboxylase and aldehyde dehydrogenase genes from Zymomonas mobilis

To improve production of ethanol from glycerol, the methylotrophic yeast Hansenula polymorpha was engineered to express the pdc and adhB genes encoding pyruvate decarboxylase and aldehyde dehydrogenase II from Zymomonas mobilis, respectively, under the control of the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) promoter. The ethanol yield was 3.3-fold higher (2.74 g l^?1) in the engineered yeast compared with the parent strain (0.83 g l^?1). Further engineering to stimulate glycerol utilization in the recombinant strain via expression of dhaD and dhaKLM genes from Klebsiella pneumoniae encoding glycerol dehydrogenase and dehydroxyacetone kinase, respectively, resulted in a 3.7-fold increase (3.1 g l^?1) in ethanol yield.     

Increased production of γ-lactones from hydroxy fatty acids by whole Waltomyces lipofer cells induced with oleic acid

Among several fatty acids tested, oleic acid was selected as the most efficient inducer for the production of 4-hydroxydodecanoic acid, a metabolite of β-oxidation, by Waltomyces lipofer. Cells were induced by incubation for 12 h in a medium containing 10 g l^?1 yeast extract, 10 g l^?1 peptone, 5 g l^?1 oleic acid, 1 g l^?1 glucose, and 0.05 % (w/v) Tween 80. The optimal reaction conditions for the production of γ-lactones by induced cells were pH 6.5, 35 °C, 200 rpm, 0.71 M Tris, 60 g l^?1 hydroxy fatty acid, and 20 g l^?1 cells. Non-induced cells produced 38 g l^?1 γ-dodecalactone from 60 g l^?1 10-hydroxystearic acid after 30 h, with a conversion yield of 63 % (w/w) and a productivity of 1.3 g l^?1 h^?1 under the optimized conditions, whereas induced cells produced 51 g l^?1 γ-dodecalactone from 60 g l^?1 10-hydroxystearic acid after 30 h, with a conversion yield of 85 % (w/w) and a productivity of 1.7 g l^?1 h^?1. The conversion yield and productivity of induced cells were 22 % and 1.3-fold higher, respectively, than those of non-induced cells. Induced cells also produced 28 g l^?1 γ-decalactone and 12 g l^?1 γ-butyrolactone from 60 g l^?1 12-hydroxystearic acid and 60 g l^?1 10-hydroxydecanoic acid, respectively, after 30 h. The concentration, conversion yield, and productivity of γ-dodecalactone and γ-decalactone are the highest reported thus far. This is the first study on the biotechnological production of γ-butyrolactone.     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

Microbial production of 2,3-butanediol by a newly-isolated strain of Serratia marcescens

A newly-isolated strain of Serratia marcescens, G12, was characterized for 2,3-butanediol (2,3-BD) production. In shake-flask and batch fermentations, 2,3-BD reached 48.5 and 51 g l^?1, respectively. Low amounts of (~8 g l^?1) of acetoin were also formed. In fed-batch fermentations, strain G12 produced 72.8 g 2,3-BD l^?1 with glucose initially at 130 g l^?1. When aeration rate was increased to 2.5 vvm for the fermentation process, 2,3-BD reached 87.8 g l^?1 and the highest productivity was 1.6 g l^?1 h^?1. Acetoin was at 6.2 g l^?1. G12 therefore may be a suitable candidate strain for large-scale production of 2,3-BD.     

Effect of controlled oxygen limitation on Candida shehatae physiology for ethanol production from xylose and glucose

Carbon distribution and kinetics of Candida shehatae were studied in fed-batch fermentation with xylose or glucose (separately) as the carbon source in mineral medium. The fermentations were carried out in two phases, an aerobic phase dedicated to growth followed by an oxygen limitation phase dedicated to ethanol production. Oxygen limitation was quantified with an average specific oxygen uptake rate (OUR) varying between 0.30 and 2.48 mmolO₂ g dry cell weight (DCW)^?1 h^?1, the maximum value before the aerobic shift. The relations among respiration, growth, ethanol production and polyol production were investigated. It appeared that ethanol was produced to provide energy, and polyols (arabitol, ribitol, glycerol and xylitol) were produced to reoxidize NADH from assimilatory reactions and from the co-factor imbalance of the two-first enzymatic steps of xylose uptake. Hence, to manage carbon flux to ethanol production, oxygen limitation was a major controlled parameter; an oxygen limitation corresponding to an average specific OUR of 1.19 mmolO₂ g DCW^?1 h^?1 allowed maximization of the ethanol yield over xylose (0.327 g g^?1), the average productivity (2.2 g l^?1 h^?1) and the ethanol final titer (48.81 g l^?1). For glucose fermentation, the ethanol yield over glucose was the highest (0.411 g g^?1) when the specific OUR was low, corresponding to an average specific OUR of 0.30 mmolO₂ g DCW^?1 h^?1, whereas the average ethanol productivity and ethanol final titer reached the maximum values of 1.81 g l^?1 h^?1 and 54.19 g l^?1 when the specific OUR was the highest.     

Raw starch conversion by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> expressing <Emphasis Type="Italic">Aspergillus tubingensis</Emphasis> amylases

Background

Starch is one of the most abundant organic polysaccharides available for the production of bio-ethanol as an alternative transport fuel. Cost-effective utilisation of starch requires consolidated bioprocessing (CBP) where a single microorganism can produce the enzymes required for hydrolysis of starch, and also convert the glucose monomers to ethanol.

Results

The Aspergillus tubingensis T8.4 α-amylase (amyA) and glucoamylase (glaA) genes were cloned and expressed in the laboratory strain Saccharomyces cerevisiae Y294 and the semi-industrial strain, S. cerevisiae Mnuα1. The recombinant AmyA and GlaA displayed protein sizes of 110–150 kDa and 90 kDa, respectively, suggesting significant glycosylation in S. cerevisiae. The Mnuα1[AmyA-GlaA] and Y294[AmyA-GlaA] strains were able to utilise 20 g l^-1 raw corn starch as sole carbohydrate source, with ethanol titers of 9.03 and 6.67 g l^-1 (0.038 and 0.028 g l^-1 h^-1), respectively, after 10 days. With a substrate load of 200 g l^-1 raw corn starch, Mnuα1[AmyA-GlaA] yielded 70.07 g l^-1 ethanol (0.58 g l^-1 h^-1) after 120 h of fermentation, whereas Y294[AmyA-GlaA] was less efficient at 43.33 g l^-1 ethanol (0.36 g l^-1 h^-1).

Conclusions

In a semi-industrial amylolytic S. cerevisiae strain expressing the A. tubingensis α-amylase and glucoamylase genes, 200 g l^-1 raw starch was completely hydrolysed (saccharified) in 120 hours with 74% converted to released sugars plus fermentation products and the remainder presumably to biomass. The single-step conversion of raw starch represents significant progress towards the realisation of CBP without the need for any heat pretreatment. Furthermore, the amylases were produced and secreted by the host strain, thus circumventing the need for exogenous amylases.

     

Effect of sugar concentration on ginsenoside biosynthesis in hairy root cultures of Panax quinquefolium cultivated in shake flasks and nutrient sprinkle bioreactor

The study assessed the influence of sugar concentration (10, 20, 30, 50, 70, 100, 120 g l^?1) on growth and ginsenoside biosynthesis in Panax quinquefolium hairy roots cultivated in shake flasks and a nutrient sprinkle bioreactor. The highest growth rate was achieved in medium containing 3–5 % sucrose. More than 70 g l^?1 or less than 20 g l^?1 sugar content in the medium induces significant inhibition of root growth when cultivated in shake flasks. The saponin content was determined using HPLC. The maximum yield (above 9 mg g^?1 d.w.) of the sum of six examined ginsenosides (Rb₁, Rb₂, Rc, Rd, Re and Rg₁) in hairy roots cultivated in shake flasks was obtained with 30 g l^?1 sucrose in the medium. The sucrose concentration in the medium was found to correlate with saponin content in bioreactor-cultured specimens. A higher level of protopanaxadiol derivatives was found for lower (20 and 30 g l^?1) sucrose concentrations; higher sucrose concentrations (50 and 70 g l^?1) in the medium stimulated a higher level of Rg group saponins.     

Cryopreservation of in vitro-grown shoot tips of Alnus glutinosa (L.) Gaertn.

In vitro-grown shoot tips of Alnus glutinosa (L.) Gaertn. were successfully cryopreserved by vitrification. Shoot tips (0.5–1 mm) excised from 6-week-old shoots were precultured in hormone-free Woody Plant Medium (WPM) supplemented with 0.2 M sucrose, for 2 days at 4 °C in the dark, and then treated with a mixture of 2 M glycerol plus 0.4 M sucrose, for 20 min at 25 °C. Osmoprotected shoot tips were first dehydrated with 50 % vitrification solution (PVS2), for 30 min at 0 °C, and then placed in 100 % PVS2, for 30 min at 0 °C. The solution was replaced with fresh 100 % PVS2, and the shoot tips were plunged directly into liquid nitrogen. The shoot tips were rewarmed in a water bath at 40 °C for 2 min, and then washed twice, for 10 min at 25 °C, with 1.2 M sucrose solution, before being transferred onto WPM supplemented with 0.5 mg l^?1 N ⁶-benzyladenine, 0.5 mg l^?1 indole-3-acetic acid, 0.2 mg l^?1 zeatin, 20 g l^?1 glucose and 6 g l^?1 Difco Bacto agar. The shoot tips were kept in darkness for 1 week and under dim lighting for another week, before being exposed to standard culture conditions (16 h photoperiod). This protocol was successfully applied to three alder genotypes, with recovery rates higher than 50 %.     

Evaluation of the tolerance of acetic acid and 2-furaldehyde on the growth of Pichia stipitis and its respiratory deficient

The use of lignocellulosic residues for ethanol production is limited by toxic compounds in fermenting yeasts present in diluted acid hydrolysates like acetic acid and 2-furaldehyde. The respiratory deficient phenotype gives the cell the ability to resist several toxic compounds. So the aim of this work was to evaluate the tolerance to toxic compounds present in lignocellulosic hydrolysates like acetic acid and 2-furaldehyde in Pichia stipitis and its respiratory deficient strains. The respiratory deficient phenotype was induced by exposure to chemical agents such as acriflavine, acrylamide and rhodamine; 23 strains were obtained. The selection criterion was based on increasing specific ethanol yield (g ethanol g^?1 biomass) with acetic acid and furaldehyde tolerance. The screening showed that P. stipitis NRRL Y-7124 ACL 2-1RD (lacking cytochrome c), obtained using acrylamide, presented the highest specific ethanol production rate (1.82 g g^?1 h^?1). Meanwhile, the ACF8-3RD strain showed the highest acetic acid tolerance (7.80 g L^?1) and the RHO2-3RD strain was able to tolerate up to 1.5 g L^?1 2-furaldehyde with a growth and ethanol production inhibition of 23 and 22 %, respectively. The use of respiratory deficient yeast phenotype is a strategy for ethanol production improvement in a medium with toxic compounds such as hydrolysed sugarcane bagasse amongst others.     

Production of δ-decalactone from linoleic acid via 13-hydroxy-9(Z)-octadecenoic acid intermediate by one-pot reaction using linoleate 13-hydratase and whole <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> cells

Objective

To produce δ-decalactone from linoleic acid by one-pot reaction using linoleate 13-hydratase with supplementation with whole Yarrowia lipolytica cells.

Results

Whole Y. lipolytica cells at 25 g l^?1 produced1.9 g l^?1 δ-decalactone from 7.5 g 13-hydroxy-9(Z)-octadecenoic acid l^?1 at pH 7.5 and 30 °C for 21 h. Linoleate 13-hydratase from Lactobacillus acidophilus at 3.5 g l^?1 with supplementation with 25 g Y. lipolytica cells l^?1 in one pot at 3 h produced 1.9 g l^?1 δ-decalactone from 10 g linoleic acid l^?1 via 13-hydroxy-9(Z)-octadecenoic acid intermediate at pH 7.5 and 30°C after 18 h, with a molar conversion yield of 31 % and productivity of 106 mg l^?1 h^?1.

Conclusion

To the best of our knowledge, this is the first production of δ-decalactone using unsaturated fatty acid.

     

Bioprospecting of thermo- and osmo-tolerant fungi from mango pulp–peel compost for bioethanol production

The persistent edaphic stress on microbial succession due to dynamic changes during composting was explored for selection of multi-stress tolerant microbe(s) desirable for ethanol production. A total of 23 strains were isolated from mango compost using four successive enrichments in YP broth (g l^?1): glucose, 100; 150; 250 with ethanol (40) and cycloheximide (0.4) at 40 °C, pH 6.0. Based on multi-gene ribotyping, 14 yeasts (61 %) of Saccharomycetaceae, 2 filamentous fungi (8.6 %) and 7 bacteria (30.4 %) were obtained. Phenetic and phylogenetic analysis of the 14 yeasts revealed 64.3 % tolerant to 500 g l^?1 glucose, growth at 45 °C and resemblance to Candida sp. (14.3 %), Kluyveromyces marxianus (35.7 %), Pichia kudriavzevii (21.4 %) and Saccharomyces cerevisiae (28.6 %). Assessment of the 14 yeasts in glucose fermentation medium (pH 4.5 at 40 °C) showed ethanol productivity of ≥92 % by 12 yeasts with theoretical yields of 90–97 %. Fermentation of molasses (150 g l^?1 glucose equivalent) by P. kudriavzevii D1C at 40 °C resulted in 73.70 ± 0.02 g l^?1 ethanol and productivity of 4.91 ± 0.01 g l^?1 h^?1. Assessment of P. kudriavzevii D1C revealed multi-stress tolerance towards 5-hydroxymethyl furfural, ethanol (20 %, v/v), high gravity and H₂O₂ (0.3 M) indicating suitability for ethanol production using high gravity molasses and pre-treated lignocellulosic biomass fermentation.     

Engineering rTCA pathway and C4-dicarboxylate transporter for <Emphasis Type="SmallCaps">l</Emphasis>-malic acid production

l-Malic acid is an important component of a vast array of food additives, antioxidants, disincrustants, pharmaceuticals, and cosmetics. Here, we presented a pathway optimization strategy and a transporter modification approach to reconstruct the l-malic acid biosynthesis pathway and transport system, respectively. First, pyruvate carboxylase (pyc) and malate dehydrogenase (mdh) from Aspergillus flavus and Rhizopus oryzae were combinatorially overexpressed to construct the reductive tricarboxylic acid (rTCA) pathway for l-malic acid biosynthesis. Second, the l-malic acid transporter (Spmae) from Schizosaccharomyces pombe was engineered by removing the ubiquitination motification to enhance the l-malic acid efflux system. Finally, the l-malic acid pathway was optimized by controlling gene expression levels, and the final l-malic acid concentration, yield, and productivity were up to 30.25 g L^?1, 0.30 g g^?1, and 0.32 g L^?1 h^?1 in the resulting strain W4209 with CaCO₃ as a neutralizing agent, respectively. In addition, these corresponding parameters of pyruvic acid remained at 30.75 g L^?1, 0.31 g g^?1, and 0.32 g L^?1 h^?1, respectively. The metabolic engineering strategy used here will be useful for efficient production of l-malic acid and other chemicals.     

Improvement of 5-aminolevulinic acid production by Rubrivivax benzoatilyticus PS-5 with self-flocculation by co-fermentation of precursors and volatile fatty acids under pH-controlled conditions

Photosynthetic bacteria are known to utilize volatile fatty acids as a carbon source for growth and product formation. In this study, a new isolate, Rubrivivax benzoatilyticus PS-5, possessing self-flocculation properties, was cultivated in modified glutamate-malate (GM) medium containing glutamate and malate as carbon sources. The effect of acetic acid, propionic acid and butyric acid (at 1–4 g L^?1) as co-substrates and 7.5 mM glycine, 10 mM succinic acid as precursors for 5-aminolevulinic acid (ALA) production from R. benzoatilyticus PS-5 was investigated. Among the volatile fatty acids tested, acetic acid was preferred to butyric acid and propionic acid, with the optimum concentrations of 3 g L^?1, 1 g L^?1 and 3 g L^?1, respectively. The highest ALA production was 169.71 μM, 162.16 μM and 46.18 μM, respectively, while the highest productivity was 2.57 μM h^?1, 2.25 μM h^?1 and 0.96 μM h^?1, respectively. The precursor was consumed completely (100 %) while the assimilation of the acetic acid and butyric acid was 62.50 % and 48.65 %, respectively. Supplementation of propionic acid (at 1–4 g l^?1) had a negative effect on growth and ALA production. To increase production efficiency, the pH-control strategy (at pH 6.0–8.0) during fermentation was tested. The optimum pH was 7.0, giving the maximum ALA production of 286.18 μM and a productivity of 3.97 μM h^?1. These values were 1.68-fold and 1.54-fold higher, respectively, than those under uncontrolled pH conditions.     

Citric acid production from extract of Jerusalem artichoke tubers by the genetically engineered yeast Yarrowia lipolytica strain 30 and purification of citric acid

In this study, citric acid production from extract of Jerusalem artichoke tubers by the genetically engineered yeast Yarrowia lipolytica strain 30 was investigated. After the compositions of the extract of Jerusalem artichoke tubers for citric acid production were optimized, the results showed that natural components of extract of Jerusalem artichoke tubers without addition of any other components were suitable for citric acid production by the yeast strain. During 10 L fermentation using the extract containing 84.3 g L^?1 total sugars, 68.3 g L^?1 citric acid was produced and the yield of citric acid was 0.91 g g^?1 within 336 h. At the end of the fermentation, 9.2 g L^?1 of residual total sugar and 2.1 g L^?1 of reducing sugar were left in the fermented medium. At the same time, citric acid in the supernatant of the culture was purified. It was found that 67.2 % of the citric acid in the supernatant of the culture was recovered and purity of citric acid in the crystal was 96 %.     

In vitro propagation of <Emphasis Type="Italic">Psoralea corylifolia</Emphasis> L. by somatic embryogenesis in cell suspension culture

An effective protocol was developed for in vitro propagation of Psoralea corylifolia via somatic embryogenesis in cell suspension culture. Embryogenic callus was obtained on Murashige and Skoog (MS) medium supplemented with 6 μM naphthaleneacetic acid (NAA) and 30 μM glutamine from transverse TCLs from 10-day-old hypocotyl explants with a 96.4% frequency. Embryogenic callus produced a higher number of somatic embryos (123.7 ± 1.24 per gram fresh weight callus) on MS medium containing 30 g l^?1 sucrose, 1 μM NAA, 4 μM benzyladenine (BA), 15 μM glutamine and 2 μM abscisic acid (ABA) after 4 weeks of culture. Somatic embryos successfully germinated (97.6%) on ½ MS medium containing 20 g l^?1 sucrose, 8 g l^?1 agar and supplemented with 2 μM BA, 1 μM ABA and 2 μM gibberellic acid (GA₃) within 2 weeks of culture. Somatic embryos developed into normal plants, which hardened with 100% efficiency in soil in a growth chamber. Plants were successfully transferred to greenhouse and subsequently established in the field. Plant survival percentage in the field differed with seasonal variations. Average psoralen content of 12.9 μg g^?1 DW was measured in different stages of somatic embryo development by high-performance liquid chromatography (HPLC). This protocol will be helpful for efficient propagation of elite clones on a mass scale, conservation efforts of this species and for secondary metabolites production studies.     

Two-stage fermentation process for enhanced mannitol production using Candida magnoliae mutant R9

Mutants of Candida magnoliae NCIM 3470 were generated by treatment of ultra-violet radiations, ethyl methyl sulphonate and N-methyl-N′-nitro-N-nitrosoguanidine. Mutants with higher reductase activity were screened by means of 2,3,5-triphenyl tetrazolium chloride agar plate assay. Among the screened mutants, the mutant R9 produced maximum mannitol (i.e. 46 g l^?1) in liquid fermentation medium containing 250 g l^?1 glucose and hence was selected for further experiments. Preliminary optimization studies were carried out on shake-flask level which increased the mannitol production to 60 g l^?1 in liquid fermentation medium containing 300 g l^?1 glucose. A two-stage fermentation process comprising of growth phase and production phase was employed. During the growth phase, glucose was supplemented and aerobic conditions were maintained. Thereafter, the production phase was initiated by supplementing fructose and switching to anaerobic conditions by discontinuing aeration and decreasing the speed of agitation. The strategy of two-stage fermentation significantly enhanced the production of mannitol up to 240 g l^?1, which is the highest among all fermentative production processes and corresponds to 81 % yield and 4 g l^?1 h^?1 productivity without formation of any by-product.