Time-optimal trajectories to circumsolar space using solar electric propulsion

The aim of this paper is to explore the capabilities of a solar electric propelled spacecraft on a mission towards circumsolar space. Using an indirect approach, the paper investigates minimum time of transfer (direct) trajectories from an initial heliocentric parking orbit to a desired final heliocentric target orbit, with a low perihelion radius and a high orbital inclination. The simulation results are then collected into graphs and tables for a trade-off analysis of the main mission parameters. Finally, a comparison of the performance between a solar electric and a (photonic) solar sail based spacecraft is discussed.     

对异面椭圆轨道目标航天器的长期绕飞轨迹设计与控制

研究了绕飞卫星对异面椭圆轨道目标航天器进行长时间绕飞观测的轨道设计与控制问题。首先建立了适用于目标航天器运行在椭圆轨道上的长期绕飞轨迹设计模型;得到了绕飞轨迹以目标航天器为中心且保持封闭的条件。然后,考虑绕飞轨迹安全性和完成任务的相对距离需求,针对具体目标设计了长期绕飞观测轨道。绕飞过程中存在的摄动和误差影响会使绕飞轨迹不能保持封闭,不满足任务需求,为此采用双脉冲方法对绕飞轨迹进行控制。仿真结果表明,对运行在异面椭圆轨道上的目标航天器,所建立的绕飞轨迹设计模型和轨迹控制方法可以用于长期绕飞轨迹设计与控制中。     

Economic assessment of high-thrust and solar-sail propulsion for near-earth asteroid mining

Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from the Earth’s deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. The paper focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods are compared in terms of maximum economic return and sets of attainable target asteroids. Results for transporting resources to geostationary orbit show that the orbital parameter hyperspace of suitable target asteroids is considerably larger for solar sails, allowing for more flexibility in selecting potential target asteroids. Also, results show that the Net Present Value that can be realized is larger when employing solar sailing instead of chemical propulsion. In addition, it is demonstrated that a higher Net Present Value can be realized when transporting volatiles to the Lunar Gateway instead of geostationary orbit. The paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.     

Designing planetary protection into the Mars Observer mission.

Planetary protection has been an important consideration during the process of designing the Mars Observer mission. It affected trajectory design of both the interplanetary transfer and the orbits at Mars; these in turn affected the observation strategies developed for the mission. The Project relied mainly on the strategy of collision avoidance to prevent contamination of Mars. Conservative estimates of spacecraft reliability and Martian atmosphere density were used to evaluate decisions concerning the interplanetary trajectory, the orbit insertion phase at Mars, and operations in orbit at Mars and afterwards. Changes in the trajectory design, especially in the orbit insertion phase, required a refinement of those estimates.     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

A new modeling method of solar energetic proton events for ISO specification

Solar energetic protons degrade performance and reliability of spacecraft systems due to single-event effects, total dose effects and displacement damage in electronics components including solar cells. On designing a solar cell panel, a total fluence of solar energetic protons (SEPs) which cause solar cell damage is needed to estimate power loss of the solar cells over mission life. Nowadays a solar panel area of spacecraft is increasing as spacecraft mission life becomes longer (15–18 years). Thus an accurate SEP model is strongly required for the cost-minimum design from the aerospace industry. The SEP model, JPL-91 proposed by Feynman et al., is currently used widely for solar cell designing. However, it is known that the JPL-91 model predicts higher fluences of protons than values actually experienced in space, especially after 7 years on orbit. In addition, the model is based on several assumptions, and also needs Monte-Carlo simulations for calculating fluences. In this study, we propose a new method for modeling SEPs especially focused on solar cell degradation. The newly-proposed method is empirical, which constructs a model based directly upon proton flux measurement data taken by instruments onboard spacecraft. This method has neither assumptions nor dependence on SEP event selection, both of which are needed in JPL-91. The model fluences derived from this method show lower fluences in longer missions compared to JPL-91. This method has been proposed to ISO (International Organization for Standardization) and has been discussed for a new standard SEP model.     

Particle-in-cell simulation of the plasma environment of a spacecraft in the solar wind

The main interactions between the plasma and the spacecraft are the wake effects, the emission of a dense photoelectron cloud and the electric charging of the surface of the spacecraft. An electrostatic particle-in-cell computer simulation model is presented, that allows the simultaneous calculation of these related effects. For different plasma properties, two-dimensional simulations yielded the steady state self-consistent potential distributions around the probe. These potentials, especially the potential barriers produced by the photoelectron cloud, have great influence on the measurements of the low energy solar wind electrons. The essential features can be verified by a comparison with selected electron distributions measured onboard the HELIOS spacecraft.     

Science objectives of the magnetic field experiment onboard Aditya-L1 spacecraft

The Aditya-L1 is first Indian solar mission scheduled to be placed in a halo orbit around the first Lagrangian point (L1) of Sun-Earth system in the year 2018–19. The approved scientific payloads onboard Aditya-L1 spacecraft includes a Fluxgate Digital Magnetometer (FGM) to measure the local magnetic field which is necessary to supplement the outcome of other scientific experiments onboard. The in-situ vector magnetic field data at L1 is essential for better understanding of the data provided by the particle and plasma analysis experiments, onboard Aditya-L1 mission. Also, the dynamics of Coronal Mass Ejections (CMEs) can be better understood with the help of in-situ magnetic field data at the L1 point region. This data will also serve as crucial input for the short lead-time space weather forecasting models.The proposed FGM is a dual range magnetic sensor on a 6?m long boom mounted on the Sun viewing panel deck and configured to deploy along the negative roll direction of the spacecraft. Two sets of sensors (tri-axial each) are proposed to be mounted, one at the tip of boom (6?m from the spacecraft) and other, midway (3?m from the spacecraft). The main science objective of this experiment is to measure the magnitude and nature of the interplanetary magnetic field (IMF) locally and to study the disturbed magnetic conditions and extreme solar events by detecting the CME from Sun as a transient event. The proposed secondary science objectives are to study the impact of interplanetary structures and shock solar wind interaction on geo-space environment and to detect low frequency plasma waves emanating from the solar corona at L1 point. This will provide a better understanding on how the Sun affects interplanetary space.In this paper, we shall give the main scientific objectives of the magnetic field experiment and brief technical details of the FGM onboard Aditya-1 spacecraft.     

木星系探测及行星穿越任务轨迹初步设计

基于我国未来木星系探测任务需求,初步设计了任务轨迹。以目前的发射能力,要实现木星的环绕探测必将利用行星借力,需设计借力轨迹。首先将脉冲变轨的轨迹设计问题转化为参数优化问题,在满足2029—2032年间发射并且飞行时间不超过7年的约束条件下,使用PSO算法对发射时刻、借力时刻、深空机动时刻、到达时刻等参数进行优化,使得探测器需提供的总速度增量最小。探测器进入木星系后,利用木卫3借力捕获至环木大椭圆轨道,又利用木卫4构造共振借力,最终捕获至木卫4的环绕轨道。在此基础上,还考虑了天王星飞越的拓展任务,天王星探测器在到达木星时与木星系探测器分离,利用木星借力可无消耗飞往天王星,并在2043年完成天王星的飞越探测任务。     

Imaging interplanetary CMEs at radio frequency from solar polar orbit

Coronal mass ejections (CMEs) represent a great concentration of mass and energy input into the lower corona. They have come to be recognized as the major driver of physical conditions change in the Sun–Earth system. Consequently, observations of CMEs are important for understanding and ultimately predicting space weather conditions. This paper discusses a proposed mission, the Solar Polar Orbit Radio Telescope (SPORT) mission, which will observe the propagation of interplanetary CMEs to distances of near 0.35 AU from the Sun. The orbit of SPORT is an elliptical solar polar orbit. The inclination angle between the orbit and ecliptic plane should be about 90°. The main payload on board SPORT will be an imaging radiometer working at the meter wavelength band (radio telescope), which can follow the propagation of interplanetary CMEs. The images that are obtained by the radio telescope embody the brightness temperature of the objectives. Due to the very large size required for the antenna aperture of the radio telescope, we adopt interferometric imaging technology to reduce it. Interferometric imaging technology is based on indirect spatial frequency domain measurements plus Fourier transformation. The SPORT spacecraft will also be equipped with a set of optical and in situ measurement instruments such as a EUV solar telescope, a solar wind ion instrument, an energetic particle detector, a magnetometer, a wave detector and a solar radio burst spectrometer.     

地月系L2平动点轨道长期维持过程研究

针对地月系L2平动点附近两种常用轨道——拟halo轨道和Lissajous轨道,研究了轨道长期维持过程。采用穿越xz平面单圈控制的轨道维持策略,控制量通过单步预测法进行寻优。在全摄动动力学模型下对拟halo轨道和Lissajous轨道受控维持下的一年飞行过程分别进行了仿真和比较,结果显示Lissajous轨道的维持控制代价优于拟halo轨道,从轨道拓扑构型保持方面对该结果进行解释,并设计对比实验加以验证。研究结论对地月系L2平动点轨道选择、维持控制策略设计、长期飞行效果分析等方面具有工程参考意义。     

太阳帆推进任务的快速仿真方法

研究太阳帆的力学特性和轨道控制设计方法,导出太阳帆的无奇点控制律.提出通过STK中MATLAB语言编写的嵌入式脚本（Plug in Script）来将由控制律得到的光压力加速度矢量,添加到STK轨道计算力学模型中,从而进行轨道控制的方法.仿真结果表明,对于常规方法难以进行仿真分析的航天器动力学模型（如太阳帆）,所提出的方法能快速灵活地支持其相应的任务,并增强任务场景的可视化,从而实现利用STK丰富的功能特性进行复杂航天任务的设计、分析和验证.     

基于电推进卫星飞往Halo轨道的转移轨道研究

利用电推进及轨道力学的特性实现节能优化,将限制性三体问题中的稳定不变流形与小推力轨道优化相结合,研究全电推进卫星从地球停泊轨道飞向日地拉格朗日L2点Halo轨道的低消耗转移轨道.航天器的转移轨道分为逃逸段、拼接段与无动力滑行段.在逃逸段卫星沿速度方向加速脱离地球引力,拼接段采用Radau伪谱法进行优化,使航天器以最短时间到达目标Halo轨道的稳定不变流形上,随后航天器电推进系统关机,沿稳定不变流形无动力滑行至目标轨道.基于雅克比积分常数给出拼接段轨道初始猜测值,以先提高切向方向航天器能量避免了全程优化离散点过多难以求解的问题.仿真结果表明,该方法收敛速度较快,对平动点工程任务的初期轨道特性计算具有实际意义.      

Planet-A mission to Halley

Looking at the chance of the next apparition of the Halley comet in 1986, ISAS decided to send a first Japasanese interplanetary spacecraft for the study of cometary hydrogen coma and solar wind. The Planet-A spacecraft which carries VUV imaging camera and solar wind plasma analyser will be launched in August 1985 and flyby the Halley comet in early March 1986 with the distance of several million kilometers from the comet nucleus. This mission is not only self-consistent but collaborative with other space mission as well as earth-bound observations. In the present paper, the Planet-A mission to Halley is described with brief explanation of the spacecraft.     

空间激光干涉引力波探测器轨道修正方法

针对空间激光干涉引力波探测器轨道修正问题，提出一种基于虚拟编队构型设计的航天器轨道修正方法。空间激光干涉引力波探测器由3颗航天器组成等边三角形构型。由于入轨误差和摄动的影响，探测器的构型不稳定。假设名义轨道上运行着一颗理想航天器，实际轨道上的真实航天器与之组成虚拟编队，探测器的3颗真实航天器分别与对应的理想航天器组成3个虚拟编队。考虑探测器构型稳定性要求和摄动的影响，对虚拟编队的构型进行设计，进而求解航天器平均轨道要素修正量。求解得到的航天器平均轨道要素修正量小于偏差量，轨道修正通过四脉冲控制实现。数值仿真结果表明，该方法通过部分轨道修正满足了探测器的构型稳定性要求，具有减少燃料消耗、延长任务寿命的潜力。      

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

火星环绕器环火轨道的角动量管理方法

针对中国首次火星探测的任务需求和规划，结合环绕器质量特性和布局构型以及大椭圆轨道特性，分析了环绕器在环火飞行阶段所受的重力梯度力矩和光压力矩规律.空间干扰力矩累积导致飞轮转速上升，影响姿态机动能力，需要喷气卸载.为减少喷气卸载次数，在满足系统任务的基础上，设计了姿态偏置方案，利用光压力矩和重力梯度力矩相互抵消减少角动量累积.通过仿真表明该方法可以将空间干扰力矩累积量减少70%，节约卸载喷气的燃料消耗，延长航天器寿命.     

基于三体系统平动点轨道的环日全景任务轨道设计

在空间开展太阳观测是研究太阳活动周、太阳爆发、极端天气等事件起源的重要手段。环日全景探测计划是为实现从黄道面360°全方位观察太阳行星际空间而提出的。本文针对环日全景探测计划,构建了基于三体系统平动点低能量轨道的环日全景轨道部署方法。该方法以日–地L1/L2点Halo轨道幅值及Halo轨道离轨点为变量,以转移轨道飞行时间、入轨机动大小为评价指标,基于三体系统不变流形构建环日全景的转移轨道,并开展轨道优化设计。采用等高线图对设计变量及任务成本进行全局分析。仿真计算表明,轨道部署无法同时满足飞行时间最短与入轨机动最小的要求。设计了轨道机动约束条件下的最优飞行时间解,并给出了基于长三甲运载火箭的一箭双星发射及入轨方案。      

Plasma polarization electric field derived from radio sounding of solar wind acceleration region with spacecraft signals

Presented is the analytical approximation of averaged solar wind velocity radial dependence in the solar wind acceleration region at heliolatitudes below 60° under low and moderate solar activity. This empirical approximation is based on the data of radio sounding of the solar corona with radio signals from various spacecraft. Deduced is an equation connecting the solar wind velocity radial dependence and the radial dependence of solar wind plasma polarization electric field intensity. This allows constructing a semi-empirical radial dependence of plasma polarization electric field corresponding to the empirical radial dependence of solar wind velocity. Main properties of the semi-empirical dependence, which is based on radio sounding data, are described.