Numerical Simulation and Experimental Identification of Divertor Configuration in the HL-2A Tokamak

Single- and double-null divertor configurations in HL-2A are simulated by SWEQU equilibrium code. Lower divertor discharges in the first physics campaign have been achieved by two kinds of power supply method of multipole-field coils. Single-null divertor configuration has been identified by visible photography, target probe arrays and the reconstructed magnetic surface. Magnetic separatrix and minor radius of plasma column are obtained by a reconstructed code of multiple current filaments using 18 Mirnov signals.     

HL-2M Divertor Geometry Exploration with SOLPS5.0

One of the critical issues to be solved for HL-2M is the power and particle exhaust. Divertor target plate geometry strongly influences the plasma profiles by controlling the neutral recycling pattern, which has in turn a strong effect on the symmetry and stability of the divertor plasma and finally on the whole edge region. The numerical simulation software SOLPS5.0 Pack- age is used to design and explore the divertor target plates for HL-2M. We choose two divertor geometries, and assess the heat flux on the target plates and first wall, then further discuss the di- vertor plasma parameters, and how private flux baffling affects both neutral recirculation pattern and pumping efficiency.     

Analysis of Divertor Heat Flux with Infrared Thermography During Gas Fuelling in the HL-2A Tokamak

In HL-2A tokamaks, the behavior of heat flux deposited on the divertor targets has been studied during deuterium gas fuelling. The heat flux is reduced significantly after supersonic molecular beam injection （SMBI） fuelling during Ohmic and electron cyclotron resonance heating （ECRH） divertor discharges. The SMBI fuelling causes an increase in the plasma density and this change results in the experienced change of the edge properties. Most of this reduction in divertor target heat flux occurs together with a high plasma radiation region located at near the X-point. The largest reduction in heat flux profiles is observed at the outboard divertor separatrix strike point, while the heat flux far from the strike point remains almost unchanged. In particular, with SMBI multi-pulses gas fuelling, a partially detached divertor regime is observed with a highly radiating region at the X-point. With the onset of the partially detached divertor regime, a sudden drop in both heat flux and power flow on the divertor target is observed. The reduction in power load on the divertor targets is roughly equal to the increase in plasma radiation loss.     

Structural Modification and Thermal and Structural Analysis of the Divertor in HL-2A

The re-design of the adoptable structure and the cooling manner of the divertor in the HL-2A tokamak is based on the parameters confirmed by the optimum divertor configuration and the primary modification scheme. The characteristics of the new divertor system include the double shear joint design on the domes and the outer target plates as well as the poloidal flow with toroidal manifolds. The results of the thermal and structural analysis of the outer target plates show that the design of the poloidal flow with toroidal manifolds can improve the capability of the target plates to withstand the heat loads, and the double shear joint design is compatible with the stress intensity requirements by the electromagnetic loads due to halo currents.     

Thermal-hydraulic analysis of the HL-2M divertor using an homogeneous equilibrium model

The heat flux of the HL-2M divertor would reach 10 MWm-2 or more at the local area when the device operates at high parameters.Subcooled boiling could occur at high thermal load,which would be simulated based on the homogeneous equilibrium model.The results show that the current design of the HL-2M divertor could withstand the local heat flux 10 MW m-2 at a plasma pulse duration of 5 s,inlet coolant pressure of 1.5 MPa and flow velocity of 4 m s-1.The pulse duration that the HL-2M divertor could withstand is closely related to the coolant velocity.In addition,at the time of 2 min after plasma discharge,the flow velocity decreased from 4 m s-1 to 1 m s-1,and the divertor could also be cooled to the initial temperature before the next plasma discharge commences.     

HL-2A Tokamak Edge Modeling with B2

The outer divertor plasma of HL-2A and its associated scrape-off plasma have been simulated using a two-dimensional multi-species fluid code of Braams with a simplified neutral gas model. HL-2A has a double-null closed divertor in separate divertor chambers above and below the nearly circular plasma tours. The computed numerical grid is developed according to an ideal magnetic surface. The calculation is involved only with pure hydrogen plasma. The emphasis has been focused on parametric studies involving variation of the assumptions made for the core plasma. The peak temperatures and the heat flux near the target are of the principal concern。     

中国环流器二号A(HL-2A)装置物理设计

文章是关于中国环流器二号A(HL-2A)装置物理设计的总结报告,包括以下几方面的内容:分析计算等离子体截面变形及由截面拉长引起的垂直不稳定性,提出对HL-2A极向磁场线圈电流和控制系统的要求;研究通过中性束注入加热(NBI)和低混杂波电流驱动(LHCD)实现等离子体剖面控制,模拟并设计HL-2A的高性能的运行模式;分析HL-2A先进约束位形(RS位形)下的磁流体力学不稳定性,为实现高性能模式稳态运行的等离子体控制指出方向;同时,利用数值模拟分析HL-2A偏滤器等离子体性能,为偏滤器的改进提供依据。     

Impurity Measured by VUV Spectrometer and OMA on HL-2A Tokamak

Impurity is one of the key issues on a great impact to the quality of tokamak plasma.HL-2A is the first divertor tokamak in China. In this paper the experimental results are presented on impurity through the line emission measurement in the campaign in 2003 under the limiter and divertor configurations. The low-Z impurities such as carbon and oxygen are the most important components in the plasma, but their content are not so high to affect the discharge quality. The high-Z impurities such as copper and ferrum are not essential. The emission intensity of impurity is clearly decreased during the divertor configuration formed.     

Influence of the X-point location on edge plasma transport in the J-TEXT tokamak with a high-field-side single-null divertor

High-density experiments in the high-field-side mid-plane single-null divertor configuration have been performed for the first time on J-TEXT.The experiments show an increase in the highest central channel line-averaged density from 2.73 x 1019 m-3 to 6.49 x 1019 m-3,while the X-point moves away from the target by increasing the divertor coil current.The corresponding Greenwald fraction rises from 0.50 to 0.79.For the impurity transport,the density normalized radiation intensity(absolute extreme ultraviolet and soft x-ray)of the central channel density decreased significantly(＞50％)with an increase in the plasma density.To better understand the underlying physics mechanisms,the 3D edge Monte Carlo code coupled with EIRENE(EMC3-EIRENE)has been implemented for the first time on J-TEXT.The simulation results show good agreement with the experimental findings.As the X-point moves away from the target,the divertor power decay length drops and the scrape-off layer impurity screening effect is enhanced.     

Investigation of turbulence rotation in the SOL and plasma edge of W7-X for different magnetic configurations

The W7-X stellarator is optimized with respect to neoclassical transport. Therefore turbulent transport plays an important role. It is equipped with an inertial cooled graphite divertor which intersects the island chain at the plasma edge depending on the magnetic configuration. Additional control coils and the plasma current modify the iota profile at the plasma edge and shift the position of the island chain. To monitor the effects on the poloidal propagation velocity in the scrape-off layer(SOL) and the plasma edge, an O-mode Poloidal Correlation Reflectometer(PCR) is used which simultaneously monitors the propagation of low-k turbulence. Operating in the density range of 0.6?×?10~(19) m~(-3) to2?×?10~(19) m~(-3) it covers a large part of the SOL and the plasma edge and allows for the experimental determination in the last closed flux surface(LCFS) and the associated shear layer in low to middensity discharges. In this paper it is shown that the propagation in the shear layer and its vicinity is determined best, when based on an elliptical model. Different magnetic configurations with magnetic edge topology of five independent islands for ι?=?1 and six linked islands for ι?=?0.81 are investigated. Also the effects of the plasma current and additional control coils on the edge magnetic topology are studied. The coherence spectra of antenna pairs for different poloidal separations is investigated. Using a decomposition method for the measured coherence spectra the characterization of turbulence spectra is possible with respect to e.g. broad band turbulence and quasi coherent modes.A strong reduction of the broad band turbulence is observed in the vicinity of the LCFS which is evidence for the suppression of low-k turbulence at the shear layer.     

偏滤器物理设计与实验研究

应用B2-code模拟了偏滤器等离子体行为,优化了HL-2A装置偏滤器位形。研究了偏滤器刮削层中等离子体与器壁间过渡鞘层的离子碰撞效应,模拟研究了利用LHCD和NBI控制等离子体剖面分布在HL-2A中建立准稳态的反磁剪切位形。HL-2A装置首次实现了下单零点的偏滤器位形运行,完成了偏滤器初步物理实验,截至2004年底,获得等离子体电流320 kA,等离子体存在时间1 580 ms,环向磁场2.2 T。开展了高功率密度聚变堆偏滤器靶板的设计研究,特别是流动液态锂偏滤器靶板表面的物理过程的研究。探索性研究了用RF有质动力势改善偏滤器排灰效率和减少氚投料量。对FEB- E聚变堆偏滤器进行了优化设计。用电子束模拟对碳基材料及钨进行了高热负荷冲击实验,完成了钨/铜合金的热等静压焊接及热疲劳试验研究。研究了氦在钨中的滞留与热解吸行为。     

Flow Field and Thermal Analysis of the Divertor Target Plate for HL-2A Tokamak

In the initial phase of the physics experiment, the double-null divertor plates used consist of graphite armor tiles, Mo-alloy intermediate layers and Cu-alloy coolant tubes. In the later operating phase, tungsten will be used as armor tiles. A multi-physical field numerical analysis method is used in this paper. Its analysis model reflects more realistically the real divertor structure than other models. Two-dimensional （2D） and three-dimensional （3D） fluid flow field, temperature distribution and thermal stress analyses of the divertor plates are carried out by the ANSYS code. During the physics experimental phase with a heat flux of 1 MW/m2, a coolant velocity of 5.48 m/s, and a thermal stress of 750 kg/cm2, the graphite armor tiles successfully meet the requirements of temperature, thermal stress and sputtering erosion. The tungsten armor will be considered as a second candidate. The result of simulation can be used for upgrading the design parameters of the HL-2A poloidal divertor.     

Effect of single-legged coil on 3D plasma boundary corrugation in EAST

A single-legged coil behind the lower divertor and covering a 120° toroidal angle is utilized in a recent EAST discharge,for the purpose of increasing the wetted area of the divertor surface by locally modifying the magnetic field near the X-point.The plasma response,in particular,the plasma boundary surface corrugation due to the single-legged coil current,is modeled by the updated MARS-F code,by computing the plasma displacement for all important toroidal harmonics (n =1,2,4 and 5) associated with the partial toroidal coverage by the coil.The plasma response produced by the single-legged coil is found to be non-local and is of the kink-peeling type.For a reference EAST plasma with a lower single-null magnetic configuration,the plasma boundary corrugation near the X-point,produced by the upper single-legged coil,is about twice as large as that produced by the lower single-legged coil,despite the proximity of the latter to the X-point.     

Design of snowflake-diverted equilibria of CFETR

The Chinese Fusion Engineering Test Reactor (CFETR) represents the next generation of full superconducting fusion reactors in China.Recently,CFETR was redesigned with a larger size and will be operated in two phases.To reduce the heat flux on the target plate,a snowflake (SF) divertor configuration is proposed.In this paper we show that by adding two dedicated poloidal field (PF) coils,the SF configuration can be achieved in both phases.The equilibria were calculated by TEQ code for a range of self-inductances li3.The coil currents were calculated at some fiducial points in the flattop phase.The results indicate that the PF coil system has the ability to maintain a long flattop phase in 7.5 and 10 MA inductive scenarios for the single null divertor (SND) and SF divertor configurations.The properties of the SF configuration were also analyzed.The connection length and flux expansion of the SF divertor were both increased significantly over the SND.     

Tokamak Power Exhaust with the Snowflake Divertor: Present Results and Outstanding Issues

A snowflake divertor magnetic configuration (Ryutov in Phys Plasmas 14(6):064502, 2007) with the second-order poloidal field null offers a number of possible advantages for tokamak plasma heat and particle exhaust in comparison with the standard poloidal divertor with the first-order null. Results from snowflake divertor experiments are briefly reviewed and future directions for research in this area are outlined.     

Two-point model analysis of SOL plasma in EAST

A two-point model is used to investigate the characteristics of scrape-off layer(SOL) plasma with the field line tracing method in the experimental advanced superconducting tokamak. The profiles of plasma density, temperature and particle flux on the divertor target calculated by the model are in reasonable agreement with experimental observation. Moreover, the profiles of plasma parameters on the divertor target strongly depend on the SOL magnetic topology or the equilibrium configuration from the modeling.     

Upgrade of an integrated Langmuir probe system on the closed divertor target plates in the HL-2A tokamak

A newly designed divertor Langmuir probe diagnostic system has been installed in a rare closed divertor of the HL-2A tokamak and steadily operated for the study of divertor physics involved edge-localized mode mitigation, detachment and redistribution of heat flux, etc. Two sets of probe arrays including 274 probe tips were placed at two ports (approximately 180° separated toroidally), and the spatial and temporal resolutions of this measurement system could reach 6 mm and 1 μs, respectively. A novel design of the ceramic isolation ring can ensure reliable electrical insulation property between the graphite tip and the copper substrate plate where plasma impurities and the dust are deposited into the gaps for a long experimental time. Meanwhile, the condition monitoring and mode conversion between single and triple probe of the probe system could be conveniently implemented via a remote-control station. The preliminary experimental result shows that the divertor Langmuir probe system is capable of measuring the high spatiotemporal parameters involved the plasma density, electron temperature, particle flux as well as heat flux during the ELMy H-mode discharges.     

Evaluation of remote maintenance schemes by plasma equilibrium analysis in Tokamak DEMO reactor

The remote maintenance schemes in a DEMO reactor are categorized by insertion direction, blanket segmentation, and divertor maintenance scheme, and are quantitatively evaluated by analysing the plasma equilibrium. The positions of the poloidal field (PF) coil are limited by the size of the toroidal field (TF) coil and the maintenance port layout of each remote maintenance scheme. Because the PF coils are located near the larger TF coil and far from the plasma surface, the horizontal sector transport maintenance scheme requires the largest part of total PF coil current, 25% larger than that required for separated sector transport using vertical maintenance ports with segmented divertor maintenance (SDM). In the unsegmented divertor maintenance (UDM) scheme, the total magnetic stored energy in the PF coils at plasma equilibrium is about 30% larger than that stored in the SDM scheme, but the time required for removal and installation of all the divertor cassettes in the UDM scheme is roughly a third of that required in the SDM scheme because the number of divertor cassettes in the UDM scheme is a third of that in the SDM scheme. From the viewpoint of simple maintenance operations, the merit of the UDM scheme has more merit than the SDM scheme.     

Numerical Study of High Heat Flux Performances of Flat-Tile Divertor Mock-ups with Hypervapotron Cooling Concept

The hypervapotron (HV), as an enhanced heat transfer technique, will be used for ITER divertor components in the dome region as well as the enhanced heat flux first wall panels. W-Cu brazing technology has been developed at SWIP (Southwestern Institute of Physics), and one W/CuCrZr/316LN component of 450 mm×52 mm×166 mm with HV cooling channels will be fabricated for high heat flux (HHF) tests. Before that a relevant analysis was carried out to optimize the structure of divertor component elements. ANSYS-CFX was used in CFD analysis and ABAQUS was adopted for thermal–mechanical calculations. Commercial code FE-SAFE was adopted to compute the fatigue life of the component. The tile size, thickness of tungsten tiles and the slit width among tungsten tiles were optimized and its HHF performances under International Thermonuclear Experimental Reactor (ITER) loading conditions were simulated. One brand new tokamak HL-2M with advanced divertor con?guration is under construction in SWIP, where ITER-like ?at-tile divertor components are adopted. This optimized design is expected to supply valuable data for HL-2M tokamak.     

HL-2A托卡马克装置的工程和实验概况

中国环流器二号A装置(HL-2A)是核工业西南物理研究院2002年投入实验运行的托卡马克,它是我国第1个具有偏滤器、等离子体截面具有一定垂直拉长的托卡马克.HL-2A的磁体使用铜导体,具有良好的灵活性和等离子体的可近性,其极向场线圈全部位于环向场线圈之内,位于真空室内的偏滤器的成形线圈可建立双零和单零的偏滤器位形.HL-2A已发展了30多套先进的等离子体诊断系统和总功率4 MW的辅助加热系统,加料技术得到持续发展.随着上述系统的建设和放电综合控制技术的提高,HL-2A装置已获得了高约束模式,这为开展先进托卡马克(AT)物理实验,ITER和聚变堆的科学、技术和工程问题等的研究奠定了基础.HL-2A也成为国际上最活跃的中型托卡马克,为国际托卡马克物理活动(ITPA)作出了积极贡献.