Bandwidth sharing under the assured forwarding Per-Hop behavior

The DiffServ’s Assured Forwarding (af) Per-Hop Behavior (phb) Group defines a differentiated forwarding of packets in four independent classes, each class having three levels of drop precedence. Specific end-to-end services based on thisphb are still being defined. A particular type of service that could assure a given rate to a traffic aggregate has been outlined elsewhere. In such a service, a fair distribution of bandwidth is one of the main concerns. This paper presents experimental work carried out to evaluate howaf distributes bandwidth among flows under different load conditions and traffic patterns. We focused on the effect that marking mechanisms have on bandwidth sharing among flows within a singleaf class. The traffic types we used includeudp flows, individual and aggregatedtcp flows, mix oftcp andudp, tcp sessions with heterogeneous round-trip times, as well as color-blind and color-aware re-marking at the aggregation point fortcp flows. Tests were performed on real and simulated networks. We have found certain conditions under whichaf distributes bandwidth fairly among nonadaptiveudp flows andtcp aggregates. Finally, we evaluate a basic rule for setting the parameters of the two-rate Three-Color Marker conditioning algorithm (trtcm) in order to achieve a better bandwidth distribution fortcp flows.     

Performance evaluation of DCCP: A focus on smoothness and TCP-friendliness

Recent years have seen dramatic increases of the use of multimedia applications on the Internet, which typically either lack congestion control or use proprietary congestion control mechanisms. This can easily cause congestion collapse or compatibility problems. Datagram Congestion Control Protocol (Dccp) fills the gap betweenUdp andTcp, featuring congestion control rather than reliability for packet-switched rich content delivery with high degree of flexibility. We present aDccp model designed and implemented withOpnet Modeler, and the experiments and evaluation focused on largely the smoothness of the data rates, and the fairness between concurrentDccp flows andTcp flows. We foundDccp-ccid3 demonstrates stable data rates under different scenarios, and the fairness betweenDccp andTcp is only achieved under certain conditions. We also validated that the throughput ofDccp-Ccid3 is proportional to the average packet size, and relatively fixed packet size is critical for the optimal operation ofDccp. Problems in the slow start phase and insufficient receiver buffer size were identified and we hereby proposed solutions on this.     

Business opportunities throughUMTS-WLAN networks

This article outlines the economic feasibility of mobile operators that combine nationwide mobility with 3G networks and hot spot coverage withWLANS, WLANS are based onHIPERLAN/2 architecture and theUMTS network exploitswCDMA/FDD technology. The evaluated business scenarios are focused on two different deployment areas, in terms of demographic characteristics and mobile penetration: a large and a small European country. The business case spans 2002 to 2011 withUMTS’ roll-out year in 2002 andWLAN’s in 2004, covering indoor hot-spot areas (stations, airports, stadiums, etc.) where demand is high. The demand for thisUMTS-WLAN roaming case is evaluated based on observations from Europe’s current mobile market and its evolution. Usage scenarios of different service packages corresponding to both residential and business markets have been taken into account. Direct investments and operational costs as well as revenue streams from traffic have been calculated. The methodology and the tool developed inACTS-TERA [1] andIST-TONIC [2] projects have been utilized for this case study. Economic conclusions have been derived, presented and discussed using key profitability factors. Profitability for all scenarios and business profiles has been calculated, presented and discussed. It includes a sensitivity analysis in order to identify the major opportunities and threats, for specific service sets as well as critical parameters and uncertainties. A wide audience from mobile operators and service providers to retail companies interested in entering the 3G market, can exploit this information.     

Web-based interorganizational information systems for logistics outsourcing

This article examines how web-based interorganizational information systems(ios)can efficiently support coordination mechanisms between outsourcer and third party logistics (3PL). First, we review the literature on coordination mechanisms andios. Second, we report on the methodology used for gathering information on outsourcers and 3PLs. Third, armed with limited but quality data, we identified two fundamental dimensions: 3PL involvement andios impacts on logistics outsourcing decisions. By combining the two dimensions, we propose a conceptual framework that highlights four main categories ofios that we characterize as neutralios, supply chainios, strategicios and dynamicios. After characterizing and analyzing each category, we discuss how these web basedios support outsourcers and 3PL along the supply chain. Finally, the article discusses the framework’s relevancy and its limits.     

WLAN standards and evolutions

Wireless Local Area Networks technologies have known an important technological and commercial development. Multiplicity of standards and variety of domains of use make necessary to compose with different technologies that can be seen either as concurrent or complementary. In this article, after positioning the different types of wireless networks (IEEE 802.11, HomeRF,HIPERLAN/2, Bluetooth) for mass market and professional applications destination, some generalities are briefly reminded such as centralised and ad-hoc architectures, regulatory constraints in the 2.45 and 5GHZ frequency bands used forWLAN, typical ranges, mobility and security features and limitations. Then the differentIEEE (802.11, 802.11a et 802.11b) andETSI (HIPERLAN/2) standards are described in details as well as their foreseen evolutions. It appears that 802.11 family of standards would take benefit of the currently existing products to evolve smoothly while integrating new features (broadband 802.11a physical layer, necessary radio features to meet European regulatory requirements, future introduction of Quality of Service schemes…). In the meantime,HIPERLAN/2 which has been specified as a complete system already supports most of those important features and is able to be adapted to various kinds of higher network layers. Lastly, it is shown that interworking schemes between 3G cellular systems andWLAN currently under investigations in 3GPP andETSI BRAN should permit in the future to easily operate wide area and multi-access technology based mobile networks.     

Modeling of submicrometer gate GaAs field effect transistors

Before describing the mainFet modelings today available, the main technological evolutions ofMesfet andTegfet are summarized. It is brought some information on the various physical effects that occur in the devices and that must be taken into account in the models. It is shown that the different kinds of modelings (Monte Carlo, two dimensional, one dimensional) constitute a continuous chain, where the different elements appear strictly complementary. Finally, the present situation concerning modeling ofMesfet andTegfet will be presented.     

Characterization and evaluation of TCP and UDP-based transport on real networks

StandardTcp (RenoTcp) does not perform well on fast long distance networks, due to its AMD congestion control algorithm. In this paper we consider the effectiveness of various alternatives, in particular with respect to their applicability to a production environment. We then characterize and evaluate the achievable throughput, stability and intra-protocol fairness of differentTcp stacks (Scalable,Hstcp,Htcp, FastTcp, Reno,Bictcp, hstcp-lp andLtcp) and aUdp based application level transport protocol (Udtv2) on both production and testbed networks. The characterization is made with respect to both the transient traffic (entry and exit of different streams) and the steady state traffic on production Academic and Research networks, using paths withRtts differing by a factor of 10. We also report on measurements made with 10 Gbit/secNics with and withoutTcp Offload Engines, on 10 Gbit/s dedicated paths set up forSc2004.     

Mastering quality of service in GPRS/UMTS an overview

Quality of Service (QoS) has become a very important issue in networking, covering many performance aspects and numerous measures. The deployment of next generation wireless system includes 2.5G General Packet Radio Service (Gprs), which is the packet-switched extension of the Global System for Mobile communications (Gsm), and Third-Generation (3G) Universal Mobile Telecommunications System (Umts) to meet the needs of larger capacity and higher bit rates. AnUmts packet core network is an IP-based network. The Internet Engineering Task Force (Ietf) Forum developed several IP QoS related mechanisms available for IP transport networks. Service Quality Management (Sqm), one component of Telecommunication Management Network (Tun), will enable providers to manage QoS against objectives set out in customer Service Level Agreements (Slas) and will enable customers to compare the service offerings of different service providers.     

Network-controlled mobility within radio access networks based onWLAN technologies

This article presents a network-controlled approach of user terminal mobility within anIP based WirelessLAN Access Network. In a first part, this article makes a review of the mobility support, on the subject of emergingWLAN technologies asHIPERLAN/2 andIEEE 802.11, on the one hand, and, regardingIP networks as currently studied withinIETF, on the other hand. Both types ofIP mobility protocols are presented, either global mobility protocols such as MobileIP, or local mobility management protocols (micro mobility). In the next part, the overall principles of our mobility management approach are explained; this approach is based on the implementation of a new network entity dedicated to the control of user terminal mobility. The last part details a practical implementation of this approach. The implementation is carried out on the basis of Hierarchical MobileIPv6 (HMIPv6). The experimental results confirm the importance to carefully plan and control the user terminal mobility within largeIP based Access Networks, as this brings benefit to the user as well as to the operator.     

Les outils du commerce électronique

Electronic commerce (ec) is a combination of practices, strategies, processes, applications and technologies, enabling business transactions. This paper focuses on software and technologies forec. In the first part, the different categories of applications forec are reviewed. A fully integrated solution does not seem to be the major trend. However, the “best of breed” approach implies an integration problem. The second part of the paper includes modeling languages andec applications core technologies. Theuml appears to be used at different levels in the development of anec solution. Web technologies are continually evolving:XML could be the language of the future for information exchanges between heterogeneous applications. The third part deals with component and application integration. In spite of converging standards for languages as well as for models, system interoperability is a major problem, when informations are to be shared and processes to be jointed. Two major trends can be identified: Web services andEDI approaches.     

Iterative successive interference cancellation for multi-user DS/CDMA detectors in multipath channels

This paper deals with uplink Direct-Sequence Code Division Multiple Access (DS-CDMA) transmissions over mobile radio channels. A new interference cancellation scheme for multiuser detection, calledSIC/RAKE, is presented. It is based on a modified multistage Successive Interference Cancellation (sic) structure that enables efficient detection in multipath propagation environments, thanks to a single userRAKE receiver incorporated in each unit of thesic structure. Furthermore, a modified version of thesic structure, calledSIC/MMSE, that ensures convergence to theMMSE detector rather than to the decorrelating detector has been suggested. The convergence of theSIC/RAKE andSIC/MMSE methods is proved. Simulation results for the Universal Mobile Telecommunication System (UMTS) have been carried out for flat fading Rayleigh multipath channels, showing that the proposed detector is resistant to the near-far effect and that low performance loss is obtained compared to the single-user bound.     

A MC-CDMA system analysis in a software radio context

This paper presents a Multi-Carrier Code Division Multiple Access (Mc-Cdma) system analysis in a software radio context. Based on a combination of multi-carrier modulation and code division multiple access,Mc-Cdma benefits from the main advantages from both schemes: high spectral efficiency, high flexibility, multiple access capabilities, etc. It is firstly shown why, nowadays,Mc-Cdma is undoubtedly a high potential candidate for the air interface of the 4G cellular networks. TheMc-Cdma concept and the block-diagrams of the transmitter and the receiver are presented first. Afterwards, the technical issues concerning the processing devices for the implementation ofMc-Cdma systems in a software radio context are analysed. The advantages and disadvantages of Digital Signal Processors (Dsps) and Field Programmable Gate Arrays (Fgpas) components are discussed. The implementation ofMc-Cdma systems and the integration of signal processing algorithms as Fast Hadamard Transform (Fht) and Inverse Fast Fourier Transform (Ifft) are considered and analysed for the first time. Finally, implementation results with a mixed prototyping board are presented. Then, it is shown that a new combination of the flow graphs ofFht andIfft leads to interesting computation savings and that hardware structures asFgpas are more adapted thanDsps to those intensive computation functions. Finally, for the completeMc-Cdma modem implementation, the necessity of a Co-Design methodology is highlighted in order to obtain the best matching between algorithms and architecture.     

ATM and AAL layer issues concerning multimedia applications

This paper presents an overview of the facilities that should be provided by theAtm layer and the adaptation layer (Aal) in order to support multimedia communications. From the analysis of data flows generated by well known multimedia applications and the services that could be offered byAtm networks both in the public and the private domain, we propose solutions enabling the availability of such applications onAtm networks taking into account both economical andQos parameters.     

AIMD-based online MPLS traffic engineering for TCP flows via distributed multi-path routing

With this paper, we propose a distributed online traffic engineering architecture formpls networks. In this architecture, a primary and secondarympls lsp are established from an ingresslsr to every other egresslsr. We propose to split thetcp traffic between the primary and secondary paths using a distributed mechanism based onecn marking andaimd-based rate control. Inspired by the random early detection mechanism for active queue management, we propose a random early reroute scheme to adaptively control the delay difference between the primary and secondarylsps. Considering the adverse effect of packet reordering ontcp performance for packet-based load balancing schemes, we propose that thetcp splitting mechanism operates on a per-flow basis. Using flow-based models developed for Internet traffic and simulations, we show that flow-based distributed multi-path traffic engineering outperforms on a consistent basis the case of a single path in terms of per-flow goodputs. Due to the elimination of out-of-order packet arrivals, flow-based splitting also enhancestcp performance with respect to packet-based splitting especially for longtcp flows that are hit hard by packet reordering. We also compare and contrast two queuing architectures for differential treatment of data packets routed over primary and secondarylsps in thempls data plane, namely first-in-first-out and strict priority queuing. We show through simulations that strict priority queuing is more effective and relatively more robust with respect to the changes in the traffic demand matrix than first-in-first-out queuing in the context of distributed multi-path routing.     

LDPC-based space-time coded OFDM systems: Turbo-EM receiver design with channel state information guessing algorithms

In this paper we study some turbo receiver architectures employing low-density parity check (Ldpc) codes together with orthogonal frequency division multiplexing (Ofdm) for high data rate wireless transmissions. Different demodulation schemes based on expectation-maximization (Em) algorithm are studied along with the channel impulse response (Em) algorithms. We studied differentCir guessing algorithms including the EM-based algorithms such as a space-alternating generalized expectation-maximization algorithm (Sage). It is shown that the proposed turbo-Em receiver employing a soft maximum a posteriori (Map)Em demodulator and a belief propagationLdpc decoder can perform within 1 dB from the ergodic capacity of the studiedMimo ofdm channels. Besides, we find that a suboptimum structure based on a soft interference cancellationMmse filtering demodulator exhibits negligible loss in non-correlated fadingMimo channels but suffer extra performance loss in highly correlatedMimo channels.     

nOBS: an ns2 based simulation tool for performance evaluation of TCP traffic in OBS networks

Performance evaluation of tcp traffic in obs networks has been under intensive study, since tcp constitutes the majority of Internet traffic. As a reliable and publicly available simulator, ns2 has been widely used for studying tcp/ip networks; however ns2 lacks many of the components for simulating optical burst switching networks. In this paper, an ns2 based obs simulation tool (nobs), which is built for studying burst assembly, scheduling and contention resolution algorithms in obs networks is presented. The node and link objects in obs are extended in nobs for developing optical nodes and optical links. The ingress, core and egress node functionalities are combined into a common optical node architecture, which comprises agents responsible for burstification, routing and scheduling. The effects of burstification parameters, e.g., burstification timeout, burst size and number of burstification buffers per egress node, on tcp performance are investigated using nobs for different tcp versions and different network topologies.     

Mobility-awareness in group key management protocols within MANETs

Several sensitive applications deployed within wireless networks require group communications. A high level of security is often required in such applications, like military or public security applications. The most suitable solution to ensure security in these services is the deployment of a group key management protocol, adapted to the characteristics ofManets, especially to mobility of nodes. In this paper, we present theOmct (Optimized Multicast Cluster Tree) algorithm for dynamic clustering of multicast group, that takes into account both nodes localization and mobility, and optimizes the energy and bandwidth consumptions. Then, we show how we integrateOmct within our group key management protocolBalade, in a sequential multi-source model. The integration ofBalade andOmct allows an efficient and fast key distribution process, validated through simulations, by applying various models of mobility (individual mobility and group mobility). The impact of the mobility model on the performance and the behaviour of the group key management protocolBalade coupled withOmct, is also evaluated.     

A countermeasure againstDDOS attacks using active networks technologies

A Distributed Denial of Service (DDoCS) attack consumes the resources of a remote host or network by sending a massive amount ofIP packets from many distributed hosts. It is a pressing problem on the Internet as demonstrated by recent attacks on major e-commerce servers andISPs. Since the attack is distributed and the attack tools evolve at a rapid and alarming rate, an effective solution must be formulated using a distributed and adaptive approach. In this paper, we propose a countermeasure againstDDoCS attacks using a method we call Active Shaping. Our method employs the Active Networks technologies, which incorporates programmability into network nodes. The Active Networks technology enables us to deter congestion and bandwidth consumption of the backbone network caused byDDoCS attacks, and to prevent our system from dropping packets of legitimate users mistakenly. This paper introduces the concept of our method, system design and evaluates the effectiveness of our method using a prototype.     

Robust time-frequency distributions based on the robust short time fourier transform

Design of time-frequency distributions (Tfds) that are robust to the impulse noise influence is considered. The robustTfds based on the robust short-time Fourier transform (Stft) are proposed. An efficient procedure to evaluate the robustStft is given. RobustTfds based on the robustStft have better energy concentration around the signal instantaneous frequency (If) than the robustStft itself. Also, theseTfds are more resistant to higher impulse noise than the robustTfds obtained using the local autocorrelation function (Laf) based minimization problem.     

Optimizing IP networks in a hybrid IGP/MPLS environment

In this paper, we consider a traffic engineering (te) approach toip networks in a hybridigp/mpls environment. Thoughigp (Interior Gateway Protocol) routing has proven its scalability and reliability, effective traffic engineering has been difficult to achieve in public IP networks because of the limited functional capabilities of conventionalip technologies.mpls (Multi-Protocol Label Switching) on the one hand enhances the possibility to engineer traffic onip networks by allowing explicit routes. But on the other hand it suffers from the scalability (n-square) problem. Hybridigp/mpls approaches rely onip native routing as much as possible and usempls only if necessary. In this work we propose a novel hybrid traffic engineering method based on genetic algorithms, which can be considered as an offlinete approach to handle long or medium-term traffic variations in the range days, weeks or months. In our approach the maximum number of hops anlsp (Label Switched Path) may take and the number oflsps which are applied solely to improve the routing performance, are treated as constraints due to delay considerations and the complexity of management. We apply our method to the German scientific network (b-win) for which a traffic matrix is available and also to some other networks with a simple demand model. We will show results comparing this hybridigp/mpls routing scenario with the result of pureigp routing and that of a full meshmpls with and without traffic splitting.