一种结合空时编码的导频辅助信道估计方法

多输入多输出-正交频分复用(MIMO-OFDM)作为一种高速率无线通信的有效方式,其信道估计技术具有非常重要的位置。将OFDM技术与基于发射分集的空时格码相结合,构造了一个基于空时格码的OFDM模型。基于MIMO-OFDM系统的导频设计准则及特性,提出了一种空时编码OFDM系统中基于导频的辅助信道估计方法。仿真实验结果表明信道估计的性能接近理想信道情况下的性能。     

MIMO-OFDM系统信道估计的研究

文章以2×2多输入多输出正交频分复用(MIMO-OFDM)系统的信道估计技术为研究对象,分析了该系统中结合空时编码的判决反馈信道估计方法和二维导频辅助MMSE信道估计方法,并通过仿真比较其性能.结果表明,对于慢衰落信道,可采用判决反馈方法进行信道估计,而对于快衰落时变信道,宜采用二维导频辅助MMSE方法进行信道估计,但要付出频率利用率下降的代价.     

一种基于空时分组编码的MIMO-SC/FDE系统的接收空间分集方案

该文提出了一种基于空时分组编码的多输入多输出频域均衡单载波分组传输(MIMO-SC/FDE)系统的空间分集接收方案,通过在Huang(2004)提出的分集结构中引入使用空时分组编码的发射分集,弥补了因减少DFT块数目而造成的性能损失,同时在接收端进一步减少了IDFT块的数目;通过适当设计空时分组编码,还可以进一步提高数据传输速率。该文详细推导了使用空时分组编码后的处理过程,并对使用空时编码后的MIMO-SC/FDE系统和相应的MIMO-OFDM系统性能进行了仿真比较。仿真结果表明,MIMO-SC/FDE系统的性能从总体上优于MIMO-OFDM系统。     

一种非线性信道MIMO-OFDM系统性能改进算法

多输入多输出正交频分复用(MIMO-OFDM)可以提高系统在频率选择性衰落信道的传输性能.与OFDM系统一样,MIMO-OFDM系统也存在高峰值平均功率比(PAPR)的问题.为此,提出了一种降低空时分组编码MIMO-OFDM系统PAPR的正交部分传输序列算法,运用这种算法,利用傅里叶变换的性质,通过调整空时编码与基带正交调制的顺序,对两天线发射端,可以降低算法近一半的复杂度,且可以减少一半的边信息.利用高功率放大器的非线性模型,得到了瑞利衰落信道下PAPR降低后系统的误码率性能.仿真结果证明了该方法的有效性.     

基于空时分组训练序列的低复杂度MIMO-OFDM信道估计

为提高MIMO-OFDM系统信道估计的性能,首先通过分析揭示了基于空时分组训练序列的MMSE信道估计器和子空间投影之间的关系。在此基础上,对空时分组训练序列简单得到的LS信道估计器进行子空间投影,得到了复杂度较低同时性能良好的信道估计。为进一步提高性能,最后提出了一种基于FFT的多径时延估计方法,使用该方法可以得到更精确的信道响应信号子空间,从而提高投影估计的性能。计算机仿真证明了所提出算法的有效性。     

空时旋转不变性编码技术及其频率选择性信道盲估计方法

针对处于频率选择性衰落环境中的垂直型贝尔实验室分层空时(Vertical Bell iabs LAyered Space-Time,V-BLAST)结构,该文首先对其进行联合空时符号分组,然后提出了一种新颖的空时旋转不变性编码技术(Space-Time Rotational-Invariance Coding Technique,STRICT)。通过巧妙利用上述编码技术中的旋转不变性性质,该文继续为V-BLAST结构提出了一种多输入多输出(Multiple-Input Multiple-Output,MIMO)频率选择性无线信道的盲估计方法。仿真结果表明了该文新颖STRICT的有效性及其信道盲估计方法的性能。     

基于空时Turbo网格码的MIMO-OFDM系统

提出了使用空时Turbo网格编码的MIMO-OFDM系统,分析了系统的性能,给出了衰落信道中的性能上界以及编码和分集增益表达式。通过仿真评估了空时Turbo网格码在慢衰落信道中的性能,与传统的STTC方法相比,该系统可以获得更好的分集增益和编码增益。     

MISO-CDMA多径系统中空时分组码的译码方法

空时编码是实现宽带无线数据通信和下一代移动通信系统的一种极有潜力的技术。为有效的将空时分组码应用到多径衰落环境下的码分多址系统，以充分利用多个路径的信号能量，现提出了一种多径环境下空时分组译码的新方法。由于空时分组码译码与信道估计紧密相关，为此本文对多径信道估计以及信道估计误差对本方法产生的影响作研究。仿真结果表明，采用多路径译码方法可以明显提高系统的误码性能。     

一种基于空时分组编码的MIMO-OFDM系统接收空间分集方案

文献[1]提出了一种使用正交设计的单输入多输出正交频分复用(SIMO-OFDM)系统的空间分集接收结构,目的是为了减少接收端DFT块的数目以降低系统复杂度和减少功率消耗。由于在线性处理过程中噪声叠加的影响,造成了一定的性能损失。本文提出了一种基于空时分组编码的多输入多输出OFDM(MIMO-OFDM)系统空间分集接收方案,通过在文献[1]提出的分集结构中引入使用空时分组编码的发射分集,弥补了因减少DFT块数目而造成的性能损失。本文对使用空时分组编码后的处理过程进行了推导,并对使用空时编码前后的系统性能进行了仿真和比较。     

直接序列扩频与线性调频仿真比较

针对对流层散射信道的频率选择性,提出了一种基于训练序列的单载波空时分组编码(Space Time Block Code,STBC)系统的信道估计算法。文章首先建立了单载波空时分组编码系统的系统模型,确定了发送分组结构和接收技术;接着提出了信道估计算法,并讨论该算法中Chu序列的最优性;最后通过仿真分析了文章中信道估计算法的性能和效率。     

Progress in electrophotography in Western Europe

A review is given of the progress in electrophotographic science and technology in Western Europe during the years 1967 to early 1971. University research work is mainly directed towards two areas: 1) the electrical and physical properties of photoconductors, such as selenium, chalcogenides, oxides, and organic materials; and 2) the sensitization of these photoconductors. Industrial research teams report on the preparation of electrophotographic layers on development and on image evaluation. A bibliography including scientific papers and patents published on this subject during said period completes this review.     

智能通信在楼宇自控系统中的应用

随着计算机技术、控制技术、通信技术及信息技术的飞速发展,人们对生活、办公环境安全性、舒适性的要求日渐增长,智能建筑应运而生。楼宇自动化控制系统是智能建筑的一个重要组成部分。通过结合具体的智能楼宇控制工程项目,在介绍系统概况的基础上,给出了系统的总体设计方案及子系统的监控方案,具有一定的实用价值。     

Advances in millimeter-wave subsystems in Japan

The authors describe the development trends and results of millimeter-wave systems in Japan in such fields as communication, radar, and measurement systems. The applications included are the W-40G waveguide transmission communication system, an automobile traffic control system using the 60-GHz band, a collision avoidance radar system for an automobile, a plasma electron density measuring system, and satellite communication. The authors describe the development of devices such as high-power FET amplifiers, traveling wave tube amplifiers (TWTAs), IMPATT amplifiers, low-noise amplifiers, and monolithic microwave integrated circuit (MMIC) devices used in constructing the millimeter-wave systems     

中国带电清洗技术的突破

一、电路故障的成因 通常,由于空气的污染和设备所处的环境及管理条件不同,空气中的灰尘、油污、酸碱及其气体、盐分、潮气、炭渍、金属尘埃、各种机械杂质等污染物质,不可避免地吸附在电路表面及其它部位,加之静电累积和在电场力的作用下,污秽的累积不断加重和变得牢固,各种污秽牢牢附着在线路表面,深层及各部位。灰尘、油污、酸碱及其气体、盐分、潮气、炭渍、金属尘埃、各种     

Telecommunications in Malaysia: diversity in adversity

The telecommunications industry in Malaysia has experienced a tremendous transformation in just over a decade. The government-owned Jabatan Talikom, which hitherto operated the network, was incorporated in 1987 and subsequently privatized a few years later, with a majority share holding by the government. The regulatory aspects were spun off under the slim looking JTM. This marked the beginning of liberalization, and many new players entered the fray. This article reviews the telecommunications infrastructure and services available in Malaysia and visits some of the telcos offering these services. Some pertinent issues affecting the industry are also discussed     

Losses in small-radius bends in single-mode fibres

Refractive index profiles and mode field radii determine small-radius bending losses in single-mode fibres. Losses in six different types of fibres were measured in bends with radii ranging from 1.25 to 8 mm. The results show that a refractive index depression in the core centre reduces the bending-loss sensitivity.<>     

Rearrangements in cell populations in malignant growth

It is emphasized that one of signs of malignant growth is heterogeneity of cell population which arises at the earliest pretumour stages and determines the character of tumour progression. At the same time by means of selective influences on population of malignant cells it is possible to change their quantitative correlation and to obtain rearrangement of the normal cell interrelations. Initiation of the tumour, its progression and regression are considered on the basis of the population-cell rearrangement, typical of each of them separately. The concept of the unity of the carcinogenesis and anticarcinogenesis processes is also formulated.     

General Trend in Electrical Communications in Japan

Systems are currently being designed for higher reliability and greater economy. Larger transmission capacity is required to meet a rapid increase in recent communication demands instigated by the introduction of video and information communications facilities. More flexibility, to deal with the variety of communication modes to come, and smaller hardware dimensions, to overcome situations caused by the high population density, seem to be particularly sought in the communication technology of Japan. Research and development concentrate on these objectives. The following is an explanation of the present state of the art and general trends in this country.     

Progress in display-device development in Western Europe

A review of the basic research and industrial development of display devices in Western Europe during the years 1968 to early 1973 will be given. The display types considered are: 1) active displays such as cathode ray tubes, light-emitting diodes, electroluminescence cells, and gas discharge devices, and 2) passive displays such as laser displays, light valves, and ferroelectric and liquid-crystal devices.