One-step microwave-assisted synthesis of Sb2O3/reduced graphene oxide composites as advanced anode materials for sodium-ion batteries

Sb₂O₃/reduced graphene oxide (RGO) composites were prepared through a facile microwave-assisted reduction of graphite oxide in SbCl₃ precursor solution, and investigated as anode material for sodium-ion batteries (SIBs). The experimental results show that a maximum specific capacity of 503 mA h g⁻¹ is achieved after 50 galvanostatic charge/discharge cycles at a current density of 100 mA g⁻¹ by optimizing the RGO content in the composites and an excellent rate performance is also obtained due to the synergistic effect between Sb₂O₃ and RGO. The high capacity, superior rate capability and excellent cycling performance of Sb₂O₃/RGO composites demonstrate their excellent sodium-ion storage ability and show their great potential as electrode materials for SIBs.     

MoO3/reduced graphene oxide composites as anode material for sodium ion batteries

MoO₃/reduced graphene oxide (MoO₃/RGO) composites were successfully prepared via a facile one-step hydrothermal method, and evaluated as anode materials for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of RGO can enhance the electrochemical performances of MoO₃/RGO composites. MoO₃/RGO composite with 6 wt% RGO delivers the highest reversible capacity of ~208 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability and excellent rate performance for SIBs. The excellent sodium storage performance of MoO₃/RGO should be attributed to the synergistic effect between MoO₃ and RGO, which offers the increased electrical conductivity, the facilitated electron transfer ability and the buffering of volume expansion.     

A high capacity NiFe2O4/RGO nanocomposites as superior anode materials for sodium-ion batteries

NiFe₂O₄/reduced graphene oxide (NFO/RGO) nanocomposites were prepared by a facile one-step hydrothermal method and used as anode for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of as-prepared samples were evaluated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge tests. The results show that NFO/RGO-20 (20 wt%) delivers the highest reversible capacity of ~450 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability. The excellent sodium storage performance of NFO/RGO should be attributed to the synergistic effect between NFO and RGO to form conductive network structure, which offers the increased specific surface area, the facilitated electron transfer ability and the buffering of volume expansion.     

Reduced graphene oxide anchored with δ-MnO2 nanoscrolls as anode materials for enhanced Li-ion storage

We developed a one-pot in situ synthesis procedure to form nanocomposite of reduced graphene oxide (RGO) sheets anchored with 1D δ-MnO₂ nanoscrolls for Li-ion batteries. The as-prepared products were characterized by X-ray diffraction (XRD), Raman spectra, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The electrochemical performance of the δ-MnO₂ nanoscrolls/RGO composite was measured by galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. The results show that the δ-MnO₂ nanoscrolls/RGO composite displays superior Li-ion battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1520 and 810 mAh g⁻¹, respectively. After 50 cycles, the reversible discharge capacity is still maintained at 528 mAh g⁻¹ at the current density of 100 mAh g⁻¹. The excellent electrochemical performance is attributed to the unique nanostructure of the δ-MnO₂ nanoscrolls/RGO composite, the high capacity of MnO₂ and superior electrical conductivity of RGO.     

Reduced graphene oxide with superior cycling stability and rate capability for sodium storage

Sodium ion battery is a promising electrical energy storage system for sustainable energy storage applications due to the abundance of sodium resources and their low cost. In this communication, the electrochemical properties of sodium ion storage in reduced graphene oxide (RGO) were studied in an electrolyte consisting of 1 M NaClO₄ in propylene carbonate (PC). The experimental results show that the RGO anode allowed significant sodium ion insertion, leading to higher capacity at high current density compared to the previously reported results for carbon materials. This is due to the fact that RGO possesses higher electrical conductivity and is a more active host, with large interlayer distances and a disordered structure, enabling it to store a higher amount of Na ions. RGO anode exhibits high capacity combined with long-term cycling stability at high current densities, leading to reversible capacity as high as 174.3 mAh g⁻¹ at 0.2 C (40 mA g⁻¹), and even 93.3 mAh g⁻¹ at 1 C (200 mA g⁻¹) after 250 cycles. Furthermore, RGO could yield a high capacity of 141 mAh g⁻¹ at 0.2 C (40 mA g⁻¹) over 1000 cycles.     

The additive-free electrode based on the layered MnO2 nanoflowers/reduced,graphene oxide film for high performance supercapacitor

The MnO₂ nanoflowers/reduced graphene oxide composite is coated on a nickel foam substrate (denoted as MnO₂ NF/RGO @ Ni foam) via the layer by layer (LBL) self-assembly technology without any polymer additive, following the soft chemical reduction. The layered MnO₂ NF/RGO composite is uniformly anchored on the Ni foam skeleton to form the 3D porous framework, and the interlayers have access to lots of ions channels to improve the electron transfer and diffusion. This special construction of 3D porous structure is beneficial to the enhancement of electrochemical property. The specific capacitance is up to 246 F g⁻¹ under the current density of 0.5 A g⁻¹. After 1000 cycles, it can retain about 93%, exhibiting excellent cycle stability. The electrochemical impedance spectroscopy measurements confirm that MnO₂ NF/RGO @ Ni foam electrode has lower R_ESR and R_CT values when compared to MnO₂ @ Ni foam and RGO @ Ni foam. This study opens a new door to the preparation of composite electrodes for high performance supercapacitor.     

Nanodiamond particles/reduced graphene oxide composites as efficient supercapacitor electrodes

The paper reports on the preparation of reduced graphene oxide (rGO) modified with nanodiamond particles composites by a simple solution phase and their use as efficient electrode in electrochemical supercapacitors. The technique relies on heating aqueous solutions of graphene oxide (GO) and nanodiamond particles (NDs) at different ratios at 100 °C for 48 h. The morphological properties, chemical composition and electrochemical behavior of the resulting rGO/NDs nanocomposites were investigated using UV/vis spectrometry, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM) and electrochemical means. The electrochemical performance, including the capacitive behavior of the rGO/NDs composites were investigated by cyclic voltammetry and galvanostatic charge/discharge curves at 1 and 2 A g⁻¹ in 1 M H₂SO₄. The rGO/ND matrix with 10/1 ratio displayed the best performance with a specific capacitance of 186 ± 10 F g⁻¹ and excellent cycling stability.     

Porous carbon spheres as anode materials for sodium-ion batteries with high capacity and long cycling life

Porous carbon spheres (PCSs) with high surface area were fabricated by the reaction of D-Glucose monohydrate precursor with sodium molybdate dihydrate (Na₂MoO₄·2H₂O) via a facile hydrothermal method followed by carbonization and aqueous ammonia solution (NH₃·H₂O) treatment. The as-prepared PCSs exhibit a highly developed porous structure with a large specific surface area and show an excellent electrochemical performance as anode material of sodium-ion batteries (SIBs). A reversible capacity of 249.9 mA h g⁻¹ after 50 cycles at a current density of 50 mA g⁻¹ and a long cycling life at a high current density of 500 mA g⁻¹ are achieved. The excellent cycling performance and high capacity make the PCSs a promising candidate for long cycling SIBs.     

Fabrication of manganese oxide/three-dimensional reduced graphene oxide composites as the supercapacitors by a reverse microemulsion method

Manganese oxide (MnO₂)/three-dimensional (3D) reduced graphene oxide (RGO) composites were prepared by a reverse microemulsion (water/oil) method. MnO₂ nanoparticles (3–20 nm in diameter) with different morphologies were produced and dispersed homogeneously on the macropore surfaces of the 3D RGO. Scanning electron microscopy and transmission electron microscopy were applied to characterize the microstructure of the composites. The MnO₂/3D RGO composites, which were annealed at 150 °C, displayed a significantly high specific capacitance of 709.8 F g⁻¹ at 0.2 A g⁻¹. After 1000 cycles, the capacitance retention was measured to be 97.6%, which indicates an excellent long-term stability of the MnO₂/3D RGO composites.     

Three-dimensional MnO/reduced graphite oxide composite films as anode materials for high performance lithium-ion batteries

MnO/reduced graphite oxide (MnO/RGO) composite films with three dimensionally porous structures have been synthesized by an improved electrostatic spray deposition setup and their microstructure and electrochemical properties have been characterized by X-ray diffraction, scanning electron microscopy, thermal gravimetric, Raman spectrometry and galvanostatic cell cycling. The results show that the structure and electrochemical performance of the electrode film are influenced significantly by the RGO content. The three dimensionally porous structure collapse does not occur in the MnO/RGO thin films for a RGO content lower than 16.58 wt%, the 16.58 wt% reduced graphite oxide content being optimal. Such an improvement in the cycling performance (772 mAh g⁻¹ after 100 cycles at 1 C) and rate capability (425 mAh g⁻¹ at 6 C) might be attributed to the excellent microstructure and electrical conductivity of MnO/reduced graphite oxide composite film electrodes.     

Porous Fe2O3 nanorods anchored on nitrogen-doped graphenes and ultrathin Al2O3 coating by atomic layer deposition for long-lived lithium ion battery anode

Porous iron oxide (Fe₂O₃) nanorods anchored on nitrogen-doped graphene sheets (NGr) were synthesized by a one-step hydrothermal route. After a simple microwave treatment, the iron oxide and graphene composite (NGr-I-M) exhibits excellent electrochemical performances as an anode for lithium ion battery (LIB). A high reversible capacity of 1016 mAh g⁻¹ can be reached at 0.1 A g⁻¹. When NGr-I-M electrode was further coated by 2 ALD cycles of ultrathin Al₂O₃ film, the first cycle Coulombic efficiency (CE), rate performance and cycling stability of the coated electrode can be greatly improved. A stable capacity of 508 mAh g⁻¹ can be achieved at 2 A g⁻¹ for 200 cycles, and an impressive capacity of 249 mAh g⁻¹ at 20 A g⁻¹ can be maintained without capacity fading for 2000 cycles. The excellent electrochemical performance can be attributed to the synergy of porous iron oxide structures, nitrogen-doped graphene framework, and ultrathin Al₂O₃ film coating. These results highlight the importance of a rational design of electrode materials improving ionic and electron transports, and potential of using ALD ultrathin coatings to mitigate capacity fading for ultrafast and long-life battery electrodes.     

Evaluation of reduced graphene oxide-supported NiSb2O6 nanocomposites for reversible lithium storage

NiSb₂O₆ and reduced graphene oxide (NiSb₂O₆/rGO) nanocomposites are successfully fabricated by a solid-state method combined with a subsequent solvothermal treatment and further used as anode material of lithium-ion battery. The NiSb₂O₆/rGO nanocomposites exhibit a higher reversible capacity (of ca. 1240.5 mA h g⁻¹ at a current density of 50 mA g⁻¹), along with a good rate capability (395.2 mA h g⁻¹ at a current density of 1200 mA g⁻¹) and excellent capacity retention (684.5 mA h g⁻¹ after 150 cycles). These good performances could be attributed to the incorporated reduced grapheme oxide, which significantly improves the electronic conductivity of the NiSb₂O₆.     

Integration of tailored reduced graphene oxide nanosheets and electrospun polyamide-66 nanofabrics for a flexible supercapacitor with high-volume- and high-area-specific capacitance

Nanofiber fabric is firstly introduced to replace common microfiber fabrics as the platform for flexible supercapacitors. Nanofiber and microfiber electrodes can be simply fabricated using a dipping process that impregnates reduced graphene oxide (RGO) nanosheets into electrospun polyamide-66 (PA66) nanofiber and microfiber fabrics. RGO nanosheets are tailored to various sizes and only RGO with a medium diameter of 250–450 nm (denoted as M-RGO) can effectively penetrate the pores of nanofiber fabrics for constructing smooth conductive paths within PA66 nanofiber fabrics. The synergistic effect between suitable sizes of RGO nanosheets and nanofiber fabrics with a high specific area provides a symmetric supercapacitor composed of M-RGO/PA66 nanofiber fabric electrodes with high-volume and high-area specific capacitance (C_S,V and C_S,A, equal to 38.79 F cm⁻³ and 0.931 F cm⁻² at 0.5 A g⁻¹, respectively), which are much larger than that of a symmetric supercapacitor composed of RGO/PA66 microfiber fabric electrodes (8.52 F cm⁻³ and 0.213 F cm⁻² at 0.5 A g⁻¹). The effect of impregnating nanofiber fabrics with suitably sized RGO to promote C_S,V and C_S,A of flexible supercapacitors has been demonstrated.     

Effect of graphene nanosheets on electrochemical performance of Li4Ti5O12 in lithium-ion capacitors

In order to improve the electrochemical performance of lithium titanium oxide, Li₄Ti₅O₁₂ (LTO), for the use in the lithium-ion capacitors (LICs) application, LTO/graphene composites were synthesized through a solid state reaction. The composite exhibited an interwoven structure with LTO particles dispersed into graphene nanosheets network rather than an agglomerated state pristine LTO particles. It was found that there is an optimum percentage of graphene additives for the formation of pure LTO phase during the solid state synthesis of LTO/graphene composite. The effect of graphene nanosheets addition on electrochemical performance of LTO was investigated by a systemic characterization of galvanostatic cycling in lithium and lithium-ion cell configuration. The optimized composite exhibited a decreased polarization upon cycling and delivered a specific capacity of 173 mA h g⁻¹ at 0.1 C and a well maintained capacity of 65 mA h g⁻¹ even at 20 C. The energy density of 14 Wh kg⁻¹ at a power density of 2700 W kg⁻¹ was exhibited by a LIC full cell with a balanced mass ratio of anode to cathode along with a superior capacitance retention of 97% after 3000 cycles at a current density of 0.4 A g⁻¹. This boost in reversible capacity, rate capability and cycling performance was attributed to a synergistic effect of graphene nanosheets, which provided a short lithium ion diffusion path as well as facile electron conduction channels.     

Amorphous CoS nanoparticle/reduced graphene oxide composite as high-performance anode material for sodium-ion batteries

Transition metal sulfides have been proved as promising candidates of anode materials for sodium-ion batteries (SIBs) due to their high sodium storage capacity, low cost and enhanced safety. In this study, the amorphous CoS nanoparticle/reduced graphene oxide (CoS/rGO) composite has been fabricated by a facile one-step electron beam radiation route to in situ decorate amorphous CoS nanoparticle on the rGO nanosheets. Benefiting from the small particle size (~2 nm), amorphous structure, and electronic conductive rGO nanosheets, the CoS/rGO nanocomposite exhibits high sodium storage capacity (440 mAh g⁻¹ at 100 mA g⁻¹), excellent cycling stability (277 mAh g⁻¹ after 100 cycles at 200 mA g⁻¹, 79.6% capacity retention) and high rate capability (149.5 mAh g⁻¹ at 2 A g⁻¹). The results provide a facile approach to fabricate promising amorphous and ultrafine metal sulfides for energy storage.     

Hollow ZnSnO3 cubes@carbon/reduced graphene oxide ternary composite as anode of lithium ion batteries with enhanced electrochemical performance

The ternary composite, carbon coated hollow ZnSnO₃ (ZS@C) cubes encapsulated in reduced graphene oxide sheets (ZS@C/rGO), was synthesized via low-temperature coprecipitation and colloid electrostatic self-assembly. The uniform carbon-coating layer not only plays a role in buffering the volume change of ZnSnO₃ cubes in the charging/discharging processes, but also forms three-dimensional network with the cooperation of graphene to maintain the structural integrity and improve the electrical conductivity. The results show that the reduced graphene oxide sheets encapsulated ZS@C microcubes with a typical core-shell structure of ~700 nm in size exhibit an improved electrochemical performance compared with bare ZS@C microcubes. The ZS@C/rGO electrode delivered an initial discharge capacity of 1984 mA h g⁻¹ at a current density of 0.1 A g⁻¹ and maintained a capacity of 1040 mA h g⁻¹ after 45 cycles. High specific capacity and superior cycle stability indicate that the ZS@C/rGO composite has a great potential for the application of lithium-ion anode material.     

Simple self-assembly of SnS2 entrapped graphene aerogel and its enhanced lithium storage performance

In this work, SnS₂ nanoplates entrapped graphene aerogel has been successfully prepared by simple self-assembly of reduced graphene oxide obtained through mild chemical reduction. Structural and morphological investigations demonstrated that SnS₂ nanoplates are highly dispersed in the three dimensional (3D) porous graphene matrix. When served as anode material for lithium-ion batteries, the electrochemical properties of SnS₂/graphene aerogel (SnS₂/GA) were evaluated by galvanostatic discharge–charge tests, cyclic voltammetry and impedance spectroscopy measurement. Compared with pristine SnS₂, the SnS₂/GA nanocomposite achieved a much higher initial reversible capacity (1186 mAh g⁻¹), superior cyclic stability (1004 mAh g⁻¹ after 60 cycles, corresponding to 84.7% of the initial reversible capacity), as well as better rate capability (650 mAh g⁻¹ at a current density of 1000 mA g⁻¹). This significantly improved lithium storage performance can be attributed to the good integration of SnS₂ nanoplates with 3D porous graphene network, which can not only provide much more active sites and easy access for Li ions intercalation, but also prevent the aggregation of SnS₂ nanoplates and facilitate fast transportation of Li ions and surface electrons during the electrochemical process.     

One-step solvothermal synthesis of spherical spinel type NiFe2−xMnxO4-RGO as high-performance supercapacitor electrodes

A facile route for the synthesis of spinel type NiFe_2−xMn_xO₄-RGO as supercapacitor electrodes is reported and the microstructure, elemental composition/content, morphology and thermal stability of NiFe_1.7Mn_0.3O₄-RGO₁₀ were characterized by XRD, FTIR, ICP, XPS, TEM, and TGA. Uniform NiFe_1.7Mn_0.3O₄ nanospheres were deposited densely on the reduced graphene oxide (RGO) sheets. The as prepared NiFe_1.7Mn_0.3O₄-RGO₁₀ composite showed better electrochemical performance than the corresponding binary metal systems. The spinel structure and the doping of Mn as the third component provided the composite with high specific capacitance of 1214.7 F g⁻¹ at 0.5 A g⁻¹ in a three-electrode system along with good cycling stability.     

Facile synthesis of sandwich-like polyaniline/boron-doped graphene nano hybrid for supercapacitors

The physicochemical property of chemically prepared graphene can be significantly changed due to the incorporating of heteroatoms into graphene. In this article, boron-doped graphene sheets are used as carbon substrates instead of graphene for loading polyaniline by in situ polymerization. Compared with the individual component and polyaniline/non-doped graphene, the sandwich-like polyaniline/boron-doped graphene exhibits remarkably enhanced electrochemical specific capacitance in both acid and alkaline electrolytes. In a three-electrode configuration, the hybrid has a specific capacitance about 406 F g⁻¹ in 1 M H₂SO₄ and 318 F g⁻¹ in 6 M KOH at 1 mV s⁻¹. In the two-electrode system of a symmetric supercapacitor, this hybrid achieves a specific capacitance about 241 and 189 F g⁻¹ at 0.5 A g⁻¹ with a specific energy density around 19.9 and 30.1 Wh kg⁻¹, in the acid and alkaline electrolytes, respectively. The as-obtained polyaniline/boron-doped graphene hybrid shows good rate performance. Notably, the obtained electrode materials exhibit long cycle stability in both acid and alkaline electrolytes (∼100% and 83% after 5000 cycles, respectively). The improved electrochemical performance of the hybrid is mainly attributed to the introduction of additional p-type carriers in carbon systems by boron-doping and the well combination of pseudocapacitive conducting polyaniline.     

Ag nanoparticles anchored NiO/GO composites for enhanced capacitive performance

Hierarchical nickel oxide/graphene oxide (NiO/GO) and nickel oxide/graphene oxide/silver (NiO/GO/Ag) heterostructures were sucessfully fabricated as high-performance supercapacitors electrode materials by using a hydrothermal process and a photoreduction process. The experimental results showed that the NiO/GO/Ag heterostructure electrodes showed better electrochemical performance than those of NiO/GO and bare NiO nanosheets. The NiO/GO/Ag electrode exhibited a higher specific capacitance of 229 F g⁻¹ at a current density of 1 A g⁻¹, higher than that of 161 F g⁻¹ for NiO/GO composites. Furthermore, NiO/GO/Ag electrode also showed good rate capability (still 200 F g⁻¹ at 6 A g⁻¹) and cycling stability (24% loss after 2000 repetitive cycles at a scan rate of 20 mV s⁻¹). The enhanced capacitive performance of the NiO/GO/Ag composites was mainly attributed to the introduction of Ag nanoparticles, which increased the electrical conductivities of the composites, and promoted the electron transfer between the active components. This study suggested that NiO/GO/Ag composites were a promising class of electrode materials for high performance energy storage applications.