Investigation of the Correlation Between Temperature and Enhancement of Electron Tunneling Current Through $hbox{HfO}_{bf 2}$ Gate Stacks

A model is established to describe the temperature dependence of the electron tunneling current through HfO₂ gate stacks based on analyzing the coupling between the longitudinal and transverse components of electron thermal energy caused by the difference of the effective electron mass between the HfO₂ gate stacks and silicon. By analyzing the three-dimensional Schrodinger equation for a MOS structure with HfO₂ gate stacks, a reduction in the barrier height is resulted from the large effective electron mass mismatch between the gate oxide and the gate (substrate). The calculated electron tunneling currents agree well with the experimental data over a wide temperature range. This coupling model can explain the temperature dependence of the electron tunneling current through HfO₂ gate stacks very well. The numerical results also demonstrate that the temperature dependence of the electron tunneling current strongly depends on the effective electron mass of HfO₂. This temperature sensitivity of the electron tunneling current can be proposed as a novel method to determine the effective electron mass of the gate oxide.     

HfO2/TaON叠层栅介质Ge MOS器件制备及电性能研究

为提高高k/Ge MOS器件的界面质量,减小等效氧化物厚度(EOT),在high-k介质和Ge表面引入薄的TaON界面层.相对于没有界面层的样品,HfO2/TaON叠层栅介质MOSFET表现出低的界面态密度、低的栅极漏电和较好的输出特性.因此利用TaON作为Ge MOS器件的界面钝化层对于获得小的等效氧化物厚度和高的高k/Ge界面质量有着重要的意义.     

Physical Understanding of Gate-Depletion Phenomena in Poly-Si/HfSiON Stacks Based on C–V Differentiation Analysis

We propose sub-1-A-resolution analysis of gate surface layer In scaled-T_inv (capacitance equivalent thickness at substrate inversion) gate stacks by differentiating their C-V curves. By introducing the universal derivative-of-capacitance curve, gate stacks with different equivalent oxide thickness of gate insulator and substrate-impurity concentration JVSub can be analyzed in one and the same plot. By applying this analysis technique to p+ poly-Si/HfSiON stack, it is found that gate depletion increases due to both lower poly impurity concentration N_poly and high pinning charge density N_ox inside the dielectric. Ultrathin SiN cap insertion onto HfSiON recovers the degradation in N_poly and N_ox leading to suppression of gate depletion and flatband voltage shift.     

AlGaN/GaN HEMT With a Transparent Gate Electrode

AlGaN/GaN high-electron-mobility transistors (HEMTs) with indium tin oxide (ITO) transparent gate electrodes have been fabricated. The transparent gate electrodes enable the investigation of photon, electron, and phonon behaviors in active regions in HEMTs using optical characterizations such as electroluminescence, photoluminescence, and Raman spectroscopy technologies. Leakage current, on/off ratio, and transparency have been compared for transistors using Ni/Au/Ni, ITO, and Ni/ITO stacks as gate electrodes. Compared to the Ni/Au/Ni gate transistor, the ITO gate device shows a comparable current gain cutoff frequency (f _T) but a much lower power gain cutoff frequency (f _max) due to the low conductivity of ITO.     

Gate leakage current suppression and reliability improvement for ultra-low EOT Ge MOS devices by suitable HfAlO/HfON thickness and sintering temperature

Ultra-low effective oxide thickness (EOT) Ge MOS devices with different HfAlO/HfON stacks and sintering temperatures are investigated in this work. The suppression of gate leakage current and improvement of reliability properties can be achieved by either stacked gate dielectrics or a low sintering temperature. Especially, the qualities of the interface and high-k gate dielectric in Ge devices are significantly improved through a low sintering temperature. A 0.5 nm HfAlO/2.5 nm HfON gate stack and a sintering temperature at 350 °C are the suitable conditions to achieve low EOT, gate leakage, and good reliability for Ge MOS devices.     

Gate dielectrics for Si,SiC, and GaN as synthesized by jet vapor deposition

The principle of the Jet-Vapor Deposition (JVD) technique for thin dielectric deposition will be introduced, the properties of JVD silicon nitride (SiN), silicon oxide, and oxide/nitride/oxide (ONO) stacks as MOS gate dielectrics for Si, SiC, and GaN will be presented.     

Impacts of gate electrode materials on threshold voltage (V/sub th/) instability in nMOS HfO/sub 2/ gate stacks under DC and AC stressing

Ultrathin nMOSFET hafnium oxide (HfO/sub 2/) gate stacks with TiN metal gate and poly-Si gate electrodes are compared to study the impact of the gate electrode on long term threshold instability reliability for both dc and ac stress conditions. The poly-Si/high-/spl kappa/ interface exhibits more traps due to interfacial reaction than the TiN/high-/spl kappa/ interface, resulting in significantly worse dc V/sub th/ instability. However, the V/sub th/ instability difference between these two stacks decreases and eventually diminishes as ac stress frequency increases, which suggests the top interface plays a minor role in charge trapping at high operating frequency. In addition, ac stress induced interface states (Nit) can be effectively recovered, resulting in negligible G/sub m/ degradation.     

A simple approach to fabrication of high-quality HfSiON gate dielectrics with improved nMOSFET performances

A simple technique to form high-quality hafnium silicon oxynitride (HfSiON) by rapid thermal processing oxidation of physical vapor deposition hafnium nitride (HfN) thin films on ultrathin silicon oxide (SiO/sub 2/) or silicon oxynitride (SiON) layer is presented. Metal TaN gate electrode is also introduced into such HfSiON stacks. Excellent performances including large electron mobility (85%SiO/sub 2/at0.2 MV/cm), low leakage current (10/sup -4/ of SiO/sub 2/), and superior time-dependant dielectric breakdown reliability are achieved in HfSiON/SiO/sub 2/ stacks, and these results suggest such stacks are very promising for the low-power SOC applications in the near future. In addition, the improvement of the electron mobility in this HfSiON/SiO/sub 2/ stack by a reduction of the border traps in the HfSiON dielectric is demonstrated.     

Reliability of HTO based high-voltage gate stacks for flash memories

We report on the excellent reliability performance of high-voltage (HV) gate stacks comprised of a thin thermal oxide and a thicker HTO layer. Time-to-breakdown of the developed stacks exceeded corresponding values for thermal HV oxides of the same thickness. Peculiarities of current relaxation in course of electrical stress tests are interpreted by injected charge trapping in HTO and new trap generation. Charge trapping in optimized HTO is low and guarantees reliable device operation.     

Plasma-Induced Damage in High-k/Metal Gate Stack Dry Etch

Plasma-based dry etch is used as the industry standard gate etch in conventional CMOS fabrication flow. However, past studies indicate that plasma-induced dry etch may impact device performance. The current research trend toward replacing conventional silicon dioxide and polysilicon gate stacks with high-k/metal gate stacks introduces a new challenge: development of new dry etch processes for critical new metals and their alloys. In this letter, a comparative study in the context of device performance has been conducted to compare dry etch versus wet etch for gate stack etch of hafnium oxide/tantalum silicon nitride gate stack. It has been found that the dry-etched gate stack exhibit significantly more gate leakage current and poorer uniformity in threshold-voltage distribution     

Improved reliability of HfO/sub 2//SiON gate stack by fluorine incorporation

Effects of fluorine (F) incorporation on the reliabilities of pMOSFETs with HfO/sub 2//SiON gate stacks have been studied. In this letter, fluorine was incorporated during the source/drain implant step and was diffused into the gate stacks during subsequent dopant activation. The authors found that F introduction only negligibly affects the fundamental electrical properties of the transistors, such as threshold voltage V/sub th/, subthreshold swing, gate leakage current, and equivalent oxide thickness. In contrast, reduced generation rates in interface states and charge trapping under constant voltage stress and bias temperature stress were observed for the fluorine-incorporated split. Moreover, the authors demonstrated for the first time that F incorporation could strengthen the immunity against plasma charging damage.     

Physically based quantum-mechanical compact model of MOS devices substrate-injected tunneling current through ultrathin (EOT /spl sim/ 1 nm) SiO/sub 2/ and high-/spl kappa/ gate stacks

Building on a previously presented compact gate capacitance (C/sub g/-V/sub g/) model, a computationally efficient and accurate physically based compact model of gate substrate-injected tunneling current (I/sub g/-V/sub g/) is provided for both ultrathin SiO/sub 2/ and high-dielectric constant (high-/spl kappa/) gate stacks of equivalent oxide thickness (EOT) down to /spl sim/ 1 nm. Direct and Fowler-Nordheim tunneling from multiple discrete subbands in the strong inversion layer are addressed. Subband energies in the presence of wave function penetration into the gate dielectric, charge distributions among the subbands subject to Fermi-Dirac statistics, and the barrier potential are provided from the compact C/sub g/-V/sub g/ model. A modified version of the conventional Wentzel-Kramer-Brillouin approximation allows for the effects of the abrupt material interfaces and nonparabolicities in complex band structures of the individual dielectrics on the tunneling current. This compact model produces simulation results comparable to those obtained via computationally intense self-consistent Poisson-Schro/spl uml/dinger simulators with the same MOS devices structures and material parameters for 1-nm EOTs of SiO/sub 2/ and high-/spl kappa//SiO/sub 2/ gate stacks on (100) Si, respectively. Comparisons to experimental data for MOS devices with metal and polysilicon gates, ultrathin dielectrics of SiO/sub 2/, Si/sub 3/N/sub 4/, and high-/spl kappa/ (e.g., HfO/sub 2/) gate stacks on (100) Si with EOTs down to /spl sim/ 1-nm show excellent agreement.     

Breakdown characteristics of nFETs in inversion with metal/HfO2 gate stacks

Time zero and time dependent dielectric breakdown (TZBD and TDDB) characteristics of atomic layer deposited (ALD) TiN/HfO₂ high-κ gate stacks are studied by applying ramped and constant voltage stress (RVS and CVS), respectively, on the n-channel MOS devices under inversion conditions. For the gate stacks with thin high-κ layers (?3.3 nm), breakdown (BD) voltage during RVS is controlled by the critical electric field in the interfacial layer (IL), while in the case of thicker high-κ stacks, BD voltage is defined by the critical field in the high-κ layer. Under low gate bias CVS, one can observe different regimes of the gate leakage time evolution starting with the gate leakage current reduction due to electron trapping in the bulk of the dielectric to soft BD and eventually hard BD. The duration of each regime, however, depends on the IL and high-κ layer thicknesses. The observed strong correlation between the stress-induced leakage current (SILC) and frequency-dependent charge pumping (CP) measurements for the gate stacks with various high-κ thicknesses indicates that the degradation of the IL triggers the breakdown of the entire gate stack. Weibull plots of time-to-breakdown (T_BD) suggest that the quality of the IL strongly affects the TDDB characteristics of the Hf-based high-κ gate stacks.     

BE-SONOS flash memory along with metal gate and high-k dielectrics in tunnel barrier and its impact on charge retention dynamics

We investigate the effect of a high-k dielectric in the tunnel layer to improve the erase speed-retention trade-off. Here, the proposed stack in the tunnel layer is AlLaO₃/HfAlO/SiO₂. These proposed materials possess low valence band offset with high permittivity to improve both the erase speed and retention time in barrier engineered silicon-oxide-nitride-oxide-silicon(BE-SONOS). In the proposed structure HfAlO and AlLaO₃ replace Si₃N₄ and the top SiO₂ layer in a conventional oxide/nitride/oxide(ONO) tunnel stack. Due to the lower conduction band offset(CBO) and high permittivity of the proposed material in the tunnel layer, it offers better program/erase(P/E) speed and retention time. In this work the gate length is also scaled down from 220 to 55 nm to observe the effect of high-k materials while scaling, for the same equivalent oxide thickness(EOT). We found that the scaling down of the gate length has a negligible impact on the memory window of the devices. Hence, various investigated tunnel oxide stacks possess a good memory window with a charge retained up to 87.4%(at room temperature) after a period of ten years. We also examine the use of a metal gate instead of a polysilicon gate, which shows improved P/E speed and retention time.     

High Mobility Strained Ge pMOSFETs With High-κ/Metal Gate

Compressively strained Ge long channel ring-type pMOSFETs with high-kappa Si/SiO₂/HfO₂/TiN gate stacks are fabricated on Si_0.2Ge_0.8 virtual substrates. Effective oxide thickness is approximately 1.4 nm with low gate leakage current. A peak hole mobility of 640 cm²/ Vldrs and up to a four times enhancement over the Si/SiO₂ universal curve are observed. Parasitic conduction within the Si-cap layers degrades the mobility at large vertical fields, although up to a 2.5 times enhancement over universal remains at a field of 0.9 MV/cm.     

Investigation of high-K gate stacks with epitaxial Gd2O3 and FUSI NiSi metal gates down to CET=0.86 nm

Novel gate stacks with epitaxial gadolinium oxide (Gd₂O₃) high-k dielectrics and fully silicided (FUSI) nickel silicide (NiSi) gate electrodes are investigated. Ultra-low leakage current densities down to 10^–7 A cm^–2 are observed at a capacitance equivalent oxide thickness of CET=1.8 nm. The influence of a titanium nitride (TiN) capping layer during silicidation is studied. Furthermore, films with an ultra-thin CET of 0.86 nm at a Gd₂O₃ thickness of 3.1 nm yield current densities down to 0.5 A cm⁻² at V_g=+1 V. The extracted dielectric constant for these gate stacks ranges from k=13 to 14. These results emphasize the potential of NiSi/Gd₂O₃ gate stacks for future material-based scaling of CMOS technology.     

Effect of UV/VUV enhanced RTP on process variation and device performance of metal gate/high-/spl kappa/ gate stacks for the sub-90-nm CMOS regime

We show that UV/VUV-enhanced rapid thermal processing (RTP) in combination with single-wafer processing using a single tool for the fabrication of metal gate/high-/spl kappa/ dielectric gate stacks not only improves overall device performance, but also leads to a significant reduction in process variation at the front end of the CMOS process flow for the sub-90-nm technology node. The gate stacks were fabricated under various UV/VUV conditions. Gate stacks processed under UV/VUV radiation during all processing steps displayed low leakage currents of the order of 10/sup -11/ A/cm/sup 2/. It is shown that the Al-Al/sub 2/O/sub 3/-Si gate stacks processed under UV/VUV conditions also display the lowest variations both in mean leakage current and mean capacitance, as compared to devices where UV/VUV was not used for all the processing steps. Therefore, it can be see that reliance on successive corrective iterations common to automatic process control or standard design simulation can be reduced significantly. As a result, UV/VUV-enhanced RTP has the potential to reduce the effect of process variations on overall device performance, thereby making the overall process more cost effective and time efficient and therefore improving yield and device reliability.     

Carrier transport in HfO/sub 2//metal gate MOSFETs: physical insight into critical parameters

Electron and hole mobility in HfO/sub 2//metal gate MOSFETs is deeply studied through low-temperature measurements down to 4.2 K. Original technological splits allow the decorrelation of the different scattering mechanisms. It is found that even when charge trapping is negligible, strong remote coulomb scattering (RCS) due to fixed charges or dipoles causes most of the mobility degradation. The effective charges are found to be located in the HfO/sub 2/ near the SiO/sub 2/ interface within 2 nm. Experimental results are well reproduced by RCS calculation using 7/spl times/10/sup 13/ cm/sup -2/ fixed charges at the HfO/sub 2//SiO/sub 2/ interface. We also discuss the role of remote phonon scattering in such gate stacks. Interactions with surface soft-optical phonon of HfO/sub 2/ are clearly evidenced for a metal gate but remain of second order. All these remote interactions are significant for an interfacial oxide thickness up to 2 nm, over which, these are negligible. Finally, the metal gate (TiN) itself induces a modified surface-roughness term that impacts the low to high effective field mobility even for the SiO/sub 2/ gate dielectric references.     

长沟道圆柱围栅高K栅栈结构MOSFETs器件的直接隧穿电流解析模型

An analytical direct tunneling gate current model for cylindrical surrounding gate（CSG） MOSFETs with high-k gate stacks is developed. It is found that the direct tunneling gate current is a strong function of the gate＇s oxide thickness, but that it is less affected by the change in channel radius. It is also revealed that when the thickness of the equivalent oxide is constant, the thinner the first layer, the smaller the direct tunneling gate current.Moreover, it can be seen that the dielectric with a higher dielectric constant shows a lower tunneling current than expected. The accuracy of the analytical model is verified by the good agreement of its results with those obtained by the three-dimensional numerical device simulator ISE.     

Modeling of direct tunneling current through interfacial oxide and high-K gate stacks

In this paper, we present a computationally efficient model to calculate the direct tunneling current from an inverted p-type (1 0 0) Si substrate through interfacial SiO₂ and high-K gate stacks. This model consists of quantum mechanical calculations for the inversion layer charge density and a modified WKB approximation for the transmission probability. The modeled direct tunneling currents agree well with a self-consistent model and experimental data. For the same effective oxide thickness (EOT) of 2 nm, the direct tunneling current of a HfO₂ high-K dielectric (6.4 nm, K_f=25) overlaying a 1 nm thermal oxide is reduced by four orders of magnitude compared with a pure SiO₂ film at low gate voltages. The effects of interfacial oxide thickness, dielectric constant and barrier height on the direct tunneling current have also been studied as a function of gate voltages.