Fe3O4@SiO2‐PANI‐Au Nanocomposite Prepared for Electrochemical Determination of Quercetin in Food Samples and Biological Fluids

A new electrochemical sensor based on Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was fabricated for modification of glassy carbon electrode (Fe₃O₄@SiO₂‐PANI‐Au GCE). The Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was characterized by TEM, FESEM‐EDS‐Mapping, XRD, and TGA methods. The Fe₃O₄@SiO₂‐PANI‐Au GC electrode exhibited an acceptable sensitivity, fast electrochemical response, and good selectivity for determination of quercetin. Under optimal conditions, the linear range for quercetin concentrations using this sensor was 1.0×10^?8 to 1.5×10^?5 mol L^?1, and the limit of detection was 3.8×10^?9 mol L^?1. The results illustrated that the offered sensor could be a possible alternative for the measurement of quercetin in food samples and biological fluids.     

Carbazole‐based conjugated polymer covalently coated Fe3O4 nanoparticle as efficient and reversible Hg2+ optical probe

A type of fluorescent–magnetic dual‐function nanocomposite, Fe₃O₄@SiO₂@P‐2, was successfully obtained by Cu⁺‐catalyzed click reaction between acetylene (C?C? H)‐substituted carbazole‐based conjugated polymer ( P‐2) and azide‐terminated silica‐coated magnetic iron oxide nanoparticles (Fe₃O₄@SiO₂–N₃). Optical and magnetization analyses indicate that Fe₃O₄@SiO₂@P‐2 exhibits stable fluorescence and rapid magnetic response. The fluorescence of Fe₃O₄@SiO₂@P‐2 was quenched significantly in the presence of I^? and gave a detection limit (DL) of ～8.85 × 10^?7 M. Given the high binding constant and matching ratio between Hg²⁺ and I^?, the fluorescence of Fe₃O₄@SiO₂@P‐2/I^? complex recovered efficiently with the addition of Hg²⁺. A DL of ～4.17 × 10^?7 M was obtained by this probing system. Recycling of Fe₃O₄@SiO₂@P‐2 probe was readily achieved by simple magnetic separation. Results indicate that Fe₃O₄@SiO₂@P‐2 can be used as an “on–off–on” fluorescent switchable and recyclable Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3636–3645     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Highly stable magnetically separable copper nanocatalyst as an efficient catalyst for C(sp2)–C(sp) and C(sp2)–C(sp2) cross‐coupling reactions

A copper catalyst has been explored as an efficient and recyclable catalyst to effect Sonogashira and Suzuki cross‐coupling reactions. After modification of 2‐(((piperazin‐1‐ylmethyl)imino)methyl)phenol (PP) on the surface of amorphous silica‐coated iron oxide (Fe₃O₄@SiO₂@Cl) magnetic core–shell nanocomposite, copper(II) chloride was employed to synthesize the Fe₃O₄@SiO₂@PP‐Cu catalyst, affording a copper loading of 1.52 mmol g⁻¹. High yield, low reaction times, non‐toxicity and recyclability of the catalyst are the main merits of this protocol. The catalyst was characterized using Fourier transform infrared, X‐ray photoelectron, energy‐dispersive X‐ray and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, and vibrating sample magnetometry.     

Fe3O4/MIL‐101(Fe) nanocomposite as an efficient and recyclable catalyst for Strecker reaction

A highly porous metal‐organic framework, MIL‐101(Fe), was prepared by a solvothermal method in the presence of amino‐modified Fe₃O₄@SiO₂ nanoparticles, in order to achieve Fe₃O₄/MIL‐101(Fe) nanocomposite, which was characterized by XRD, FT‐IR, SEM, TEM, BET, and VSM. This hybrid magnetic nanocomposite was employed as heterogeneous catalyst for α‐amino nitriles synthesis through three‐component condensation reaction of aldehydes (ketones), amines, and trimethylsilyl cyanide in EtOH, at room temperature. The recoverability and reusability was admitted for the heterogeneous magnetic catalyst; no significant reduction of catalytic activity was observed even after five consecutive reaction cycles.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Highly selective and recyclable hydrogenation of α‐pinene catalyzed by ruthenium nanoparticles loaded on amphiphilic core–shell magnetic nanomaterials

A multifunctional nanomaterial (Fe₃O₄@SiO₂@C_X@NH₂) comprising a magnetic core, a silicon protective interlayer, and an amphiphilic silica shell is successfully prepared. Ru nanoparticles catalyst loaded on Fe₃O₄@SiO₂@C_X@NH₂ is used in hydrogenation of α‐pinene for the first time. The novel nanomaterial with amphipathy can be used as a solid foaming agent to increase gas–liquid–solid three‐phase contact and accelerate the reaction. Under the mild conditions (40 °C, 1 MPa H₂, 3 h), 99.9% α‐pinene conversion and 98.9% cis‐pinane selectivity are obtained, which is by far the best results reported. Furthermore, the magnetic nanocomposite catalyst can be easily separated by an external magnet and reused nine times with high selectivity maintaining.     

Gallic acid grafted to amine‐functionalized magnetic nanoparticles as a proficient catalyst for environmentally friendly synthesis of α‐aminonitriles

An effective approach of one‐pot catalytic Strecker reaction between aromatic aldehydes, aniline or toluidine and trimethylsilyl cyanide in the presence of amine‐functionalized Fe₃O₄@SiO₂ nanoparticles grafted with gallic acid (GA) as a powerful catalyst was developed. The fabricated reusable catalyst demonstrated high efficiency in the synthesis of α‐aminonitriles along with facile work‐up procedure. Fe₃O₄@SiO₂‐NH₂‐GA was characterized by Fourier transform‐infrared spectroscopy, scanning electron microscopy image, vibrating‐sample magnetometer curve, energy‐dispersive X‐ray analysis and thermogravimetric analysis.     

Novel I–V Disposable Urea Biosensor Based on a Dip‐coated Hierarchical Magnetic Nanocomposite (Fe3O4@SiO2@NH2) on SnO2:F Layer

Silicon oxide was initially loaded on a Fe₃O₄ magnetic nanoparticle substrate (Fe₃O₄@SiO₂) and then functionalized with ─NH₂ group (Fe₃O₄@SiO₂@NH₂) to construct a novel hierarchical magnetic nanocomposite. A sensitive urea biosensor medium involving a dip‐coated hierarchical magnetic nanocomposite on F‐doped SnO₂ conducting glass was designed (Fe₃O₄@SiO₂@NH₂/SnO₂:F) to achieve an excellent platform for urease (Urs) enzyme immobilization via covalent linking to the exposed NH₂ groups through glutaraldehyde (Urs/Fe₃O₄@SiO₂@NH₂/SnO₂:F). The hierarchical magnetic nanocomposite selection criteria were based on enhancement of urea biosensing by Urs immobilization via covalent linking to the exposed NH₂ groups, while the SnO₂:F selection as substrate was based on its ability to afford high electronic density to the biosensor surface as an electrostatic repulsion layer for the anionic interferents in the biological environment. FE‐SEM, TEM, FTIR, CV, EIS, and I–V techniques established the morphology of the modified electrode's surface and electrochemical behavior of urea on the fabricated Urs/Fe₃O₄@SiO₂@NH₂/SnO₂:F biosensor. The sensing mechanism can be clarified on the basis of the two reactions, namely (1) catalytic reaction and (2) oxidation or reduction of metal oxides, same as in the case of solid‐state gas sensors. The I–V results display high sensitivity for urea detection of within 5–210 mg/dL and a limit of detection of 3 mg/dL.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation,characterization and heterogeneous catalytic applications of GO/Fe3O4/HPW nanocomposite in chemoselective and green oxidation of alcohols with aqueous H2O2

Graphene oxide ‐ Fe₃O₄ ‐ NH₃⁺H₂PW₁₂O₄₀ ^‐ magnetic nanocomposite (GO/Fe₃O₄/HPW) was prepared by linking amino ‐ functionalized Fe₃O₄ nanoparticles (Fe₃O₄ ‐ NH₂) on the graphene oxide (GO), and then grafting 12 ‐ tungstophosphoric acid (H₃PW₁₂O₄₀) on the graphene oxide ‐ magnetite hybrid (GO ‐ Fe₃O₄ ‐ NH₂). The obtained GO/Fe₃O₄/HPW nanocomposite was well characterized with different techniques such as FT ‐ IR, TEM, SEM, XRD, EDX, TGA ‐ DTA, AGFM, ICP and BET measurements. The used techniques showed that the graphene oxide layers were well prepared and the various stages of preparation of the GO/Fe₃O₄/HPW nanocomposites successfully completed. This new nanocomposite displayed excellent performance as a heterogeneous catalyst in the oxidation of alcohols with H₂O₂. The as ‐ prepared GO/Fe₃O₄/HPW catalyst was more stable and recyclable at least five times without significantly reducing its catalytic activity.     

Synthesis and characterization of a novel Fe3O4@SiO2/bipyridinium dichloride nanocomposite and its application as a magnetic and recyclable phase-transfer catalyst in the preparation of β-azidoalcohols, β-cyanohydrins,and β-acetoxy alcohols

β-Azidoalcohols, β-cyanohydrins, and β-acetoxy alcohols have been synthesized in the presence of a Fe₃O₄@SiO₂/bipyridinium nanocomposite (Fe₃O₄@SiO₂/BNC) as a novel magnetic and recyclable phase-transfer catalyst (PTC) in water. The catalyst was characterized with FT–IR, SEM, XRD, VSM, and TGA. This methodology offers several advantages, including easy work-up procedure, excellent regioselectivity, high yields, short reaction times, recyclable catalyst, easy separation of the catalyst through an external magnet and eco-friendly procedure.     

Magnetically recoverable copper nanorods and their catalytic activity in Ullmann cross‐coupling reaction

A novel polydentate ligand supported on Fe₃O₄@SiO₂ was designed and demonstrated for the synthesis of Cu nanorods. The Fe₃O₄@SiO₂/EP.EN.EG@Cu was characterized using X‐ray diffraction, thermogravimetric analysis, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy and vibrating sample magnetometry. The Fe₃O₄@SiO₂/EP.EN.EG@Cu showed excellent catalytic efficiency for the cross‐coupling reaction of nitrogen‐containing heterocycles with aryl halides. The catalyst could be effectively separated from the reaction mixture by simply applying an external magnetic field and reused at least five times without loss of activity.     

Hiyama cross‐coupling reaction using Pd(II) nanocatalyst immobilized on the surface of Fe3O4@SiO2

We report a simple process for the synthesis of Fe₃O₄@SiO₂/APTMS (APTMS = 3‐aminopropyltrimethoxysilane) core–shell nanocatalyst support. The new nanocatalyst was prepared by stabilization of Pd(cdha)₂ (cdha = bis(2‐chloro‐3,4‐dihydroxyacetophenone)) on the surface of the Fe₃O₄@SiO₂/APTMS support. The structure and composition of this catalyst were characterized using various techniques. An efficient method was developed for the synthesis of a wide variety of biaryl compounds via fluoride‐free Hiyama cross‐coupling reactions of aryl halides with arylsiloxane, with Fe₃O₄@SiO₂/APTMS/Pd(cdha)₂ as the catalyst under reaction conditions. This methodology can be performed at 100°C through a simple one‐pot operation using in situ generated palladium nanoparticles. High catalytic activity, quick separation of catalyst from products using an external magnetic field and use of water as green solvent are attributes of this protocol.     

Direct Electrochemistry of Hemoglobin Based on Fe3O4@SiO2 Nanoparticles Modified Electrode

A biosensor based on hemoglobin‐Fe₃O₄@SiO₂ nanoparticle bioconjunctions modified indium‐tin‐oxide (Hb/Fe₃O₄@SiO₂/ITO) electrode was fabricated to determine the concentration of H₂O₂. UV‐vis absorption spectra, fourier transform infrared (FT‐IR) spectroscopy, cyclic voltammetry (CV) and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the bioconjunction of Fe₃O₄@SiO₂ with Hb. Experimental results demonstrate that the immobilized Hb on the Fe₃O₄@SiO₂ matrix retained its native structure well. In addition, Fe₃O₄@SiO₂ nanoparticles (NPs) are very effective in facilitating electron transfer of the immobilized enzyme, which can be attributed to the unique nanostructure and larger surface area of the Fe₃O₄@SiO₂ NPs. The biosensor displayed good performance for the detection of H₂O₂ with a wide linear range from 2.03×10^?6 to 4.05×10^?3 mol/L and a detection limit of 0.32 µmol/L. The resulting biosensor exhibited fast amperometric response, good stability, reproducibility, and selectivity to H₂O₂.     

Comparison of Cadmium Cd2+ and Lead Pb2+ Binding by Fe2O3@SiO2‐EDTA Nanoparticles – Binding Stability and Kinetic Studies

This study describes the synthesis and characterization of ethylenediaminetetraacetic acid (EDTA) functionalized magnetic nanoparticles of 20 nm in size – Fe₃O₄@SiO₂‐EDTA – which were used as a novel magnetic adsorbent for Cd(II) and Pb(II) binding in aqueous medium. These nanoparticles were obtained in two‐stage synthesis: covering by tetraethyl orthosilicate and functionalization with EDTA derivatives. Nanoparticles were characterized using TEM, FT‐IR, and XPS methods. Metal ions were detected under optimized experimental conditions using Differential Pulse Anodic Stripping Voltammetry (DPASV) and Hanging Mercury Drop Electrode (HDME) techniques. We compared the ability of Fe₃O₄@SiO₂‐EDTA to bind cadmium and lead in concentration of 553.9 μg L^?1 and 647.5 μg L^?1, respectively. Obtained results show that the adsorption rate of cadmium binding was very high. The equilibrium for Fe₃O₄@SiO₂‐EDTA‐Cd(II) was reached within 19 min while for the Fe₃O₄@SiO₂‐EDTA‐Pb(II) was reached within 25 minutes. About 2 mg of nanoparticles was enough to bind 87.5 % Cd(II) and 54.1 % Pb(II) content. In the next step the binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles was determined. Only 1.265 mg of Fe₃O₄@SiO₂‐EDTA was enough to bind 96.14 % cadmium ions while 5.080 mg of nanoparticles bound 40.83 % lead ions. This phenomenon proves that the studied nanoparticles bind Cd(II) much better than Pb(II). The cadmium ions binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles decreased during storage in 0.5 M KCl solution. Two days of Fe₃O₄@SiO₂‐EDTA storage in KCl solution caused the 32 % increase in the amount of nanoparticles required to bind 60 % of cadmium while eight‐days storage caused further increase to 328 %. The performed experiment confirmed that the storage of nanoparticles in solution without any surfactants reduced their binding capacity. The best binding capacity was observed for the nanoparticles prepared directly before the electrochemical measurements.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Preparation of novel magnetic noble metals supramolecular composite for the reduction of organic dyes and nitro aromatics

By considering the exceptional properties of supramolecular, noble metals (NM) and magnetic nanoparticles (NPs), we successfully synthesized a novel magnetic, metals and supramolecular composite. Briefly, the Fe₃O₄@SiO₂ core-shell spheres were first modified with gold (Au) and palladium (Pd) NPs and then with mono-6-thio-β-cyclodextrin (SH-β-CD). The synthesized Fe₃O₄@SiO₂-Au-Pd@SH-β-CD nanocomposite shows a good magnetic response (42.3 emu/g). The nanocomposite showed good performance for the reductive degradation of rhodamine B (RhB) and 4-nitrophenol (4-NP). The calculated rate constant (k) values for the reduction of 4-NP and RhB were 0.062± 0.02 s⁻¹ and 0.027± 0.01 s^−1, respectively. The high catalytical performance was supposed to be due to the host-guest interaction of β-CD and also due to the NM synergic effect. The nanocomposite structural and chemical morphology was investigated by various spectroscopic techniques. Furthermore, the catalyst was recycled six times and it maintains morphology, chemical nature, and high magnetic behavior, as demonstrated by FTIR and TEM analysis of the recycled catalyst. These results demonstrate a very efficient, cost-effective, and recyclable catalyst in the field of catalysis technology development.     

Improvement on physical properties of polyethersulfone membranes modified by poly(1‐vinylpyrrolidone) grafted magnetic Fe3O4@SiO2 nanoparticles

Polyethersulfone (PES) and poly(1‐vinylpyrrolidone) (PVP) were used to prepare ultrafiltration membranes with grafted Fe₃O₄ magnetic nanoparticles (PVP‐g‐Fe₃O₄@SiO₂). The structure of synthesized PVP‐g‐Fe₃O₄@SiO₂ was confirmed by FT‐IR and SEM analysis. Physical properties of blend membranes such as thermal resistance, Tensile strength, water uptake, and hydrophilicity were also investigated. Blended membranes of PES/PVP‐g‐Fe₃O₄@SiO₂ have exhibited higher thermal resistance due to increasing the modified nanoparticle content. The hydrophilicity of the synthesized PES/PVP‐g‐Fe₃O₄@SiO₂ membranes also improved by increasing the PVP‐g‐Fe₃O₄@SiO₂ content. As expected, increasing the hydrophilicity of blended membrane, caused enhancement of fouling resistance in membranes. Results showed that the content of PVP‐g‐Fe₃O₄@SiO₂ has different effects on the properties of synthesized composite membranes. Despite increasing the content of PVP‐g‐Fe₃O₄@SiO₂ has a negative effect on elongation, positive effects on maximum stress was observed. Moreover, the water uptake of synthesized membranes was significantly enhanced in comparison to other similar studies.     

Voltammetric determination of vitamin B<Subscript>6</Subscript> (pyridoxine) at a graphite screen-printed electrode modified with graphene oxide/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> nanocomposite

The preparation and study of electrochemical properties of a graphite screen-printed electrode (SPE) modified with the GO/Fe₃O₄@SiO₂ (GO is graphene oxide) nanocomposites are described. The morphologies of the GO/Fe₃O₄@SiO₂ nanocomposites were examined by scanning electron microscopy. The electrochemical oxidation of vitamin B₆ (pyridoxine) on SPE modified with the GO/Fe₃O₄@SiO₂ nanocomposite was investigated by cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. Under optimum conditions (pH 7.0), the vitamin B₆ oxidation at the surface of the modified SPE occurs at a potential about 190 mV less positive than that at the unmodified SPE. A linear voltammetric response for vitamin B₆ was obtained in the concentration range 1.0?10 ⁶—9.0?10 ⁴ mol L^–1 with a detection limit of 5.2?10 ⁷ mol L^–1 using differential pulse voltammetry. The developed sensor was also successfully applied for determination of trace level of vitamin B₆ in both the standard vitamin B₆ sample and biological samples (urine).