离子交换固相萃取高效液相色谱联用法检测河豚鱼中的河豚毒素

优化建立了采用混合模式阳离子交换固相萃取柱代替传统的C18固相萃取柱进行前处理,联用高效液相色谱检测河豚鱼中河豚毒素的方法.样品经合1％乙酸的乙腈甲醇(3:1,V:V)溶液提取,混合模式阳离子交换固相萃取柱(MCX)净化,5％氨水/甲醇溶液洗脱,采用高效液相色谱-二极管阵列检测器(HPLC-PAD)测定,外标法定量.河...     

土壤中10种多溴联苯醚的加速溶剂-固相萃取净化方法优化研究

建立了土壤中10种多溴联苯醚(PBDEs)的加速溶剂萃取-固相萃取净化-气相色谱分析测定方法.采用加速溶剂萃取(ASE)技术对土壤中10种PBDEs进行提取,并对4种萃取体系(正己烷、正己烷-丙酮(4∶1,V/V)、正己烷-丙酮(1∶1,V/V)、正己烷-二氯甲烷(1∶1,V/V))进行优化;采用固相萃取(SPE)技术对样品进行净化,制备了10种不同填料的SPE柱,通过洗脱实验和加标回收率实验对各SPE柱的净化性能进行对比筛选.最终优化条件为正己烷-丙酮(4∶1,V/V)体系提取,酸性硅胶柱净化.在优化条件下,10种PBDEs的回收率为74.4％ ～ 125.2％,相对标准偏差为4.4％ ～ 14.4％,方法检出限为0.04～0.22 ng/mL.本方法简单、快速、净化效果较好、重现性和回收率良好,可用于土壤样品中PBDEs的分析.     

分子印迹固相萃取技术检测江水、尿液及牛奶中雌激素残留

以β-雌二醇和炔雌醇的分子印迹聚合物为填料制备固相萃取小柱,选择60%(V/V)甲醇-水溶液作为雌激素的淋洗液,甲醇-乙酸(9:1,V/V)为洗脱液,洗脱两次可彻底洗脱固相萃取小柱中目标分子.以建立的萃取条件对上海黄浦江水、尿液、牛奶中雌激素进行富集,结合高效液相色谱法,建立了基于分子印迹固相萃取技术检测上述实际样品中...     

通过式固相萃取净化/液相色谱-串联质谱法快速检测水产品中11种青霉素残留

采用通过式固相萃取净化策略去除样品基质中的脂肪和磷脂等杂质干扰,结合液相色谱-串联质谱检测,建立了水产品中11种青霉素残留的同时快速分析方法。样品经80%乙腈水溶液提取,Oasis PRi ME HLB通过式固相萃取柱净化,C_(18)色谱柱分离,0.05%甲酸乙腈溶液和0.05%甲酸水溶液梯度洗脱,多反应监测正离子模式扫描,内标法定量。11种目标物在相应浓度范围内线性关系良好,相关系数不低于0.99,检出限为0.30~1.5μg/kg。基质加标回收率为85.5%~110%,相对标准偏差(RSD)为5.9%~14.3%。该方法前处理操作简便,灵敏度和准确度高,可实现水产品中多种青霉素药物残留的同时快速测定。     

通过式固相萃取/UPLC-MS/MS测定小麦粉及其添加剂中非食用物质三聚硫氰酸三钠盐

建立了采用通过式固相萃取柱净化,超高效液相色谱-串联质谱(UPLC-MS/MS)测定小麦粉及其添加剂中非食用物质三聚硫氰酸三钠盐(TMT)总量的方法。样品中总三聚硫氰酸三钠盐以乙腈-100 mmol/L甲酸/甲酸铵缓冲溶液提取,上清液经Oasis PRiME HLB通过式固相萃取柱净化,HSS T3色谱柱分离,以甲醇-酸化甲酸铵为流动相进行梯度洗脱,三重四极杆质谱检测,外标法定量。在优化条件下,TMT在0.5~250 ng/mL范围内线性关系良好(r2=0.997 7)。方法检出限(S/N=3)为0.02 mg/kg,定量下限(S/N=10)为0.05 mg/kg,平均回收率为95.0%~110%,相对标准偏差(RSD)均不大于5.6%。该方法简便、高效、准确、抗干扰能力强,适用于小麦粉及其添加剂中痕量非食用物质TMT总量的准确定性、定量分析。     

固相萃取-毛细管气相色谱法测定生活饮用水中16种硝基苯类化合物

建立了生活饮用水中16种硝基苯类物质的固相萃取-毛细管气相色谱-电子捕获检测方法.实验优化了色谱柱、升温程序等色谱条件,并对影响固相萃取效果的主要因素(萃取小柱、洗脱剂和洗脱体积)进行了考察.水样中16种硝基苯类物质经Oasis HLB固相萃取柱吸附、正己烷-丙酮(3∶1,V/V)洗脱后,采用DB-1701毛细管气相色谱柱程序升温分离、ECD检测,在33 min内完成所有待测组分的测定.16种硝基苯类组分在各自的线性范围内相关系数r≥0.998,方法的检出限为0.01 ～0.77 μg/L(S/N=3),定量限为0.03 ～2.57 μg/L(S/N=10),日内精度和日间精度分别在1.0％ ～ 3.8％和2.3％～4.8％间,样品加标回收率为83.6％～ 111.8％,加标样品的RSD为1.2％ ～5.1％.应用本方法对50份水样进行了分析,结果表明,本方法准确、灵敏、快速,适用于水质的常规分析,可为水样中硝基苯类物质的污染评价提供技术支持.     

分散固相萃取-气相色谱-质谱法测定含油脂食品中17种邻苯二甲酸酯

建立了含油脂食品中17种邻苯二甲酸酯的分散固相萃取-气相色谱-质谱法检测方法。奶茶样品经乙腈-甲基叔丁基醚(9∶1,V/V)提取后,提取液用MAS-PAEC分散固相萃取管进行净化。调味包样品经乙腈(正己烷饱和)-甲基叔丁基醚(19∶1,V/V)提取2次后,提取液用CNW分散固相萃取管进行净化。采用基质匹配标准外标法进行定量分析。结果表明,奶茶中17种邻苯二甲酸酯的加标回收率为82.2%～125.4%;相对标准偏差小于16.5%;方法检出限为100～200μg/L。调味包中17种邻苯二甲酸酯的加标回收率为70.9%～115.5%;相对标准偏差小于9.8%;方法检出限为400～800μg/L。本方法快速、精确、简易、廉价、稳定,可应用于含油脂食品中17种邻苯二甲酸酯的实际检测分析。     

阳离子交换在线固相萃取/液相色谱-串联质谱法检测牛奶中14种磺胺药物残留

建立了阳离子交换模式在线固相萃取-液相色谱串联质谱法检测牛奶中14种磺胺药物方法。取5 g样品用15 mL乙腈提取和除蛋白,提取液于50℃氮气吹干后,用1.00 mL 0.2％甲酸溶解,溶解液通过双三元液相色谱用阳离子在线固相萃取柱在线富集净化,2％氨水甲醇/0.2％甲酸(50：50,V/V)洗脱。然后转移至C18色谱柱上进行分离,再用串联四级杆质谱检测。结果表明,14种磺胺类药物在0.1~10μg/kg含量范围内线性良好(r≥0.999);方法的检出限为0.05μg/kg,定量限为0.1μg/kg;方法回收率在60％~90％范围内,批内和批间相对标准偏差都小于10％。本方法较传统固相萃取柱净化法更简捷、经济和稳定。     

改进通过式固相萃取柱-超高效液相色谱-串联质谱法测定谷物及制品中脱氧雪腐镰刀菌烯醇及衍生物的含量北大核心CSCD

开发、设计一种改进通过式固相萃取柱,用于谷物及其制品中脱氧雪腐镰刀菌烯醇及其4种衍生物的前处理。称取固体样品2.00 g(液体样品5.00 g),加入400μL 1.0 mg·L^(-1)内标混合溶液,振荡混匀,静置30 min,再加入20.0 mL 84%(体积分数)乙腈溶液(液体样品加入15.0 mL乙腈),涡旋振荡20 min,离心5 min。移取约8 mL上清液,用改进通过式固相萃取柱[填料为160 mg C_(18)、300 mg石墨化碳黑、100 mg氨丙基净化剂(NH_(2))和300 mg硅藻土的混合物]处理,取5.0 mL滤液,于40℃氮吹至干后,加入1.0 mL水,超声30 s,涡旋30 s,过0.22μm微孔滤膜。采用超高效液相色谱-串联质谱法测定其中脱氧雪腐镰刀菌烯醇及其4种衍生物的含量,内标法定量。结果表明:经改进通过式固相萃取柱处理后,样品溶液澄清透明,并且5种目标物的基质效应减少;5种目标物标准曲线的线性范围为10~2 000μg·L^(-1),检出限为(3S/N)为5.0μg·kg^(-1);对小麦粉、大米、玉米、啤酒、白酒等基质进行3个浓度水平的加标回收试验,回收率为74.6%~106%,测定值的相对标准偏差(n=6)均不大于9.1%;方法用于162份样品分析,小麦粉、玉米、大米、啤酒中均检出脱氧雪腐镰刀菌烯醇,衍生物中仅检出3-乙酰化脱氧雪腐镰刀菌烯醇和雪腐镰刀菌烯醇。     

超高效液相色谱法测定鸡组织中二硝托胺及其代谢产物残留量

建立了超高效液相色谱同时测定鸡组织中二硝托胺及其代谢产物(3-Amino-5-nitro-o-toluamide,ANOT)的方法.样品用酸性磷酸盐缓冲液提取两次,离心后合并提取液,并调至pH 7.0,过HLB固相萃取小柱,用0.1％甲酸溶液-乙腈(80:20,V/V)洗脱,洗脱液过滤膜后进行超高效液相色谱分析,二极管...     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

Mass and NMR spectra of haplophyllidine and perforine and of their derivatives

Conclusions The mass and NMR spectra of haplophyllidine, perforine, and their derivatives have been studied. The influence of the open and cyclic forms of the molecular ion on the nature of the fragmentation has been discussed. The main routes of fragmentation of the compounds considered are due to the presence of substituents at C₈ and C₄.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 273–279, 1969     

Crystal and molecular structure of aroyl- and acetylhydrazones of acet- and benzaldehydes

Aroyl- and acetylhydrazones of acet- (I) and benzaldehydes (IV) and benzoylhydrazones of acet- (II) and benzaldehydes (III) were studied by x-ray structural and quantum-chemical methods in order to establish their structures. Compund (I) was the EEZ structure in the crystal. Calculations and spectral data showed that the EEE form occurs in nonpolar solvents and in the gas phase. According to crystallographic data molecules (I)–(IV) are the E-isomers (relative to the N-N bond) and the hydrazone fragments are planar. Intermolecular N-H...O H-bonds from in the crystals. The data obtained suggest that the majority of acylhydrazones are conformationally rigid on dissolution although exceptions do occur. Apparently the reasons for the difference of acetyl- and benzoylhydrazones in electrocarboxylation reactions are electronic and not steric factors.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 75–81, January, 1991.     

Investigation of adhesion and mobility of polyurethane and epoxy-rubber glues and adhesives

The values of activation parameters in uncured and cured epoxy resins, rubbers, and blends thereof are investigated. The dependences of activation energy and adhesion strength of epoxy-rubber compositions on rubber content are determined. The correlation of adhesion and activation energy values for polyurethane rubber and epoxy-rubber compositions is shown.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。