Solvent-Extraction Behavior of Cobalt(II), Nickel(II), Copper(II), and Palladium(II) with Tri-n-butylphosphate

Abstract

A systematic study of the extraction behavior of cobalt(II), nickel(II), copper(II), and palladium(II) with TBP from thiocyanate system in various ranges of acid concentrations has been performed. The thiocyanate medium leads to enhanced extractions in all these cases compared to those in the previously used chloride medium. For palladium, the chloride and nitrate systems have been critically examined. Sixty-two per cent extraction occurs from 4 M hydrochloric acid using 100% TBP in a single run and the extraction becomes quantitative (>99%) after four successive equilibrations. A simpler method has been proposed for rapid extraction of palladium(II) as the thiocyanate complex. Quantitative extraction occurs in the presence of 1.2% thiocyanate solution from 0.5 to 2 M hydrochloric acid (initial) up to pH 8.0. The extractable species of cobalt(II), nickel(II), copper(II), and palladium(II) from thiocyanate medium are probably similar and of the type [M(CNS)₄]^2? [K·TBP·3H₂O]₂ ⁺ (buffer solution) and [M(CNS)₄]^2? [H·TBP·3H₂O]⁺ ₂ (acid solution). A simple extraction scheme has been worked out for the separation of palladium(II) from iron(III), cobalt(II), nickel, manganese(II), copper(II), and platinum.     

Stability constants of adipate complexes of copper(II), nickel(II), zinc(II), cobalt(II), uranyl(II) and thorium(IV) determined by electrophoresis

Stability constants of Copper(II), Nickel(II), Cobalt(II), Zinc(II), Uranyl(II) and Thorium(IV) adipates have been determined by paper electrophoresis. Adipic acid (0.005 mol dm^?3) was added to the background electrolyte: 0.1 mol dm^?3 HClO₄. The proportions of (CH₂)₄COOH COO^? and (CH₂)₄C₂O⁼₂ were varied by changing the pH of the electrolyte. These anions yielded the complexes Zn(CH₂)₄COOH COO⁺, Co(CH₂)₄COOH COO⁺, Ni(CH₂)₄COOH COO⁺, Th(CH₂)₄COOH COO³⁺, Th[(CH₂)₄COOH COO]₄, Cu(CH₂)₄ C₂O₄ and UO₂[(CH₂)₄(C₂O₄)]^2?₂, whose stability constants are found to be 10^2.8, 10^2.8, 10^3.2, 10^5.2, 10^15.3, 10^2.7 and 10^11.8 respectively (μ = 0.1, temp. 40°C).     

1-Amino-4-aryl-2(1H)-pyrimidinthione: Acidität und Komplexbildung mit Mn(II), Co(II), Ni(II), Zn(II), Cd(II), Pb(II) und Ag(I)

1-Amino-4-aryl-2(1H)-pyrimidinethiones: Acidity and Complex Formation with Nonferrous Metal Ions and Ag(I) Acid dissociation constants of new 2, 3 and already known 1 substituted 1-amino-4-aryl-2(1H)-pyrimidinethiones and stability constants of their nonferrous metal ion and silver complexes have been measured pH-potentiometrically in a 75% (v/v) mixture of dioxane/water. The influence of the substituents on pK_a- and lgβ_n-values is discussed. The X-ray structure analysis of bis[1-(4-toluenesulfonamido)-4-(4-tolyl)-2(1H)-pyrimidinethionatol]-nickel(II) 5 proves that pyrimidinethiones coordinate via their thione sulphur and aminonitrogen. However, the bond lengths are not levelled in the chelating ring.     

Antibacterial Co(II), Cu(II), Ni(II) and Zn(II) Complexes of Thiadiazoles Schiff Bases

Schiff bases were obtained by condensation of 2-amino-l,3,4-thiadiazole with 5-substituted-salicylaldehydes which were further used to obtain complexes of the type [M(L)(2)]Cl(2), where M=Co(II), Cu(II), Ni(II) or Zn(II). The new compounds described here have been characterized by physical, spectral and analytical data, and have been screened for antibacterial activity against several bacterial strains such as Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. The antibacterial potency of these Schiff bases increased upon chelation/complexation, against the tested bacterial species, opening new aproaches in the fight against antibiotic resistant strains.     

Evaluation of sorption behavior of polymethylene-bis(2-hydroxybenzaldehyde) for Cu(II), Ni(II), Fe(III), Co(II) and Cd(II) ions

Poly[5,5??-methylene-bis(2-hydroxybenzaldehyde)1,2-phenylenediimine] resin was prepared and characterized by employing elemental, thermal analysis, FTIR, and UV?Cvisible spectroscopy. The metal uptake behavior of synthesized polymer towards Cu(II), Co(II), Ni(II), Fe(III) and Cd(II) ions was investigated and optimized with respect to pH, shaking speed, and equilibration time. The sorption data of all these metal ions followed Langmuir, Freundlich, and Dubinin?CRadushkevich isotherms. The Freundlich parameters were computed 1/n?=?0.31?±?0.02, 0.3091?±?0.02, 0.3201?±?0.05, 0.368?±?0.04, and 0.23?±?0.01, A?=?3.4?±?0.03, 4.31?±?0.02, 4.683?±?0.01, 5.43?±?0.03, and 2.8?±?0.05?mmol?g^?1 for Cu(II), Co(II), Ni(II), Fe(III), and Cd(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantity (??H) in the range of 36.72?C53.21?kJ/mol. Using kinetic equations (Morris?CWeber and Lagergren equations), values of intraparticle transport and the first-order rate constant was computed for all the five metals ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination by atomic absorption spectrometer. It was found that the adsorption capacity values for metal-ion intake followed the following order: Cd(II)?>?Co(II)?>?Fe(III)?>?Ni(II)?>?Cu(II).     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Synthesis, Characterization and Antiproliferative Activity of the Co(II), Ni(II), Cu(II), Pd(II) and Pt(II) Complexes of 2-(4-Thiazolyl)Benzimidazole (Thiabendazole)

Complexes of 2-(4-thiazolyi)benzimidazole (thiabendazole, THBD) with Co(II), Ni(II), Cu(ll) of general formula ML(2)(NO(3))(2) H(2)O and complexes of Pd(II) and Pt(II) of general formula ML2Cl(2) H(2)O have been obtained and characterized by elemental analyses, IR and far IR spectroscopy and magnetic measurements. The X-ray crystal structure of the copper(II) complex has been determined. The in vitro cell proliferation inhibitory activity of these compounds was examined against human cancer cell lines A 549 (lung carcinoma), HCV-29 T (urinary bladder carcinoma), MCF-7 (breast cancer), T47D (breast cancer), MES-SA (uterine carcinoma) and HL-60 (promyelocytic leukemia). Pt-THBD has been found to exhibit an antileukemic activity of the HL-60 line cells matching that of an arbitrary criterion.     

Removal of Cd(II), Pb(II), Cu(II) and Ni(II) from water using modified pine bark

This paper describes the removal of Cd(II), Pb(II), Cu(II), and Ni(II) ions from aqueous solutions using chemically modified pine barks (Pinus nigra). In this article, effects of chemical modification methods on the adsorption capacity have been investigated. Changes of the surface properties were examined by the FTIR, SEM and zeta potential analyses. HCl, NaOH, Fenton reactive, polymerization, acetone, ethanol, chloroform, tetra ethylene glycol, diethyl ether and glycol were used for modification processes. Maximum adsorption capacities were obtained by modification with NaOH (13-20 mg/g), Fenton (12-17 mg/g) and polymerization (12-16.5 mg/g). These modification processes also decreased Chemical Oxygen Demand of water from 1820 mg/L for raw pine barks to 35 mg/L for NaOH modified barks. Adsorption capacities of adsorbents increased from 2 mg/g to 20 mg/g as a result of modification that accordingly increase adsorbent surface activity.     

A new method for the simultaneous determination of Fe(III), Cu(II), Pb(II), Zn(II), Cd(II), and Ni(II) in wine using differential pulse polarography

A new and simple differential pulse polarographic method for the analysis of wine has been established. With this method, it was possible to determine simultaneously six trace elements in wine. There was no need for time consuming extraction and separation procedures with danger of contamination. The polarogram of wet digested wine was taken initially in pH 2 acetate buffer and Pb, Cd, and Zn were determined by standard additions. Ethylene diamine tetraacetic acid (EDTA) was added and pH was increased to six by addition of NaOH. Fe and Cu were determined subsequently. The ammonia buffer, pH 9.5, was identified as the best medium for separation and determination of Ni and Zn. The quantities of trace elements were found as Cu 290 ± 20 μg L⁻¹, Fe 8960 ± 50 μg L⁻¹, Pb 148 ± 17 μg L⁻¹, Cd 16 ± 8 μg L⁻¹, Zn 460 ± 25 μg L⁻¹, and Ni 78 ± 17 μg L⁻¹.     

Mono- and multi-component biosorption of lead(II), cadmium(II), copper(II) and nickel(II) ions onto coco-peat biomass

The potential of using coco-peat biomass (CPB) has been assessed for the removal of Pb(II), Cd(II), Cu(II) and Ni(II) ions from single and quaternary solutions. According to Langmuir isotherm, the maximum biosorption capacity of CPB was 0.484, 0.151, 0.383 and 0.181 mmol/g for Pb(II), Cd(II), Cu(II) and Ni(II) ions, respectively. Scanning electron microscopy along with energy-dispersive X-ray spectroscopy and Fourier-transform IR spectroscopy confirmed changes in the biosorbent functionality after metal sorption. Through quaternary isotherm experiments, 16.1%, 48.2%, 32.3% and 46.5% decrease in experimental uptakes were observed for Pb(II), Cd(II), Cu(II) and Ni(II), respectively, in the presence of other metal ions.     

Adsorption of As(III), As(V), Cd(II), Cu(II), and Pb(II) from Aqueous Solutions by Natural Muscovite

Various parameters were tested for the application of natural muscovite (NM) in the removal of metals from aqueous solutions: contact time, pH, ionic strength, and initial metal concentrations. Kinetic studies showed that the pseudo-second-order model explains well the sorption process. The adsorption of metals was greatly influenced by solution pH but not by ionic strength. The results from isotherm studies agreed more with the Freundlich isotherm model than with the Langmuir isotherm model. The adsorbed quantity of metals by NM was lower than that by the purified mica. These results suggested that the composition and surface characteristics of natural minerals may seriously influence applications for water purification.     

Conductometric studies of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates in N,N—dimethylacetamide solutions

Results are reported for the molar conductivities at 25°C of N,N—dimethylacetamide (DMA) solutions of Bu₄NBF₄ and Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates. The limiting molar conductivities of [M(DMA)₆]²⁺ (M  MN, Co, Ni, Cu, Zn) and BF^?₄, as well as association constants for Co(BF₄)₂ in DMA solutions have been calculated. The slight differences between conductometric curves of different metal ions are discussed.     

Synthesis, characterization, and properties of polychelates of poly(maleic acid-co-olefin) with Cu(II), Co(II), Ni(II), and Zn(II)

SUMMARY Polychelates of poly(maleic acid-co-olefin) with Cu(II), Co(II), Ni(II), and Zn(II) metal ions are synthesized. These compounds are characterized by FT IR, UV-vis spectroscopy, and thermal analysis. The electrical conductivity measurements are carried out. These demonstrate that at temperature close to 130°C the electrical conductivity increased to values near to the semiconductor range. The PM3 calculations are also carried to study the geometry of the polychelates. Received: 1 November 2000/Revised version: 20 March 2001/Accepted: 21 March 2001     

Polychelates of poly(acrylic acid-co-acrylamide)with Cu(II), Co(II), and Ni(II) Synthesis and properties

SUMMARY Polychelates were obtained by addition of an aqueous solution of the poly(acrylic acid-co-acrylamide) to an aqueous solution of Cu(II), Co(II), and Ni(II). All the polychelates were insoluble in water and in common organic solvents. The polychelates were characterized by elemental analysis, FT-IR spectroscopy thermogravimetry, and showed tetrahedral arrangement for Co(II) and Ni(II). Magnetic and conductivity studies for all the polychelates were also carried out. The poly(acrylic acid-co-acrylamide) behaved as semiconductor. Received: 25 July 1997/Revised version: 1 December 1997/Accepted: 5 December 1997     

Water-soluble oxidized starch in complexation of Fe(III), Cu(II), Ni(II) and Zn(II) ions

The structure of the bromate-oxidized wheat starch (OS) contains partly opened glucose units with carbonyl and carboxyl groups at C2-, C3- or C6-positions. OS with a variable degree of oxidation (DO) was studied in alkaline conditions as a water-soluble complexing agent for Fe(III), Cu(II), Ni(II) and Zn(II) ions, which are common in various wastewaters. Complexation was studied by inductively coupled plasma-optical emission spectrometry (ICP–OES) in a single metal ion or multi-metal ion solutions. The DO affected the efficiency of the complexation with metal ions. OS with the high DO (carboxyl and carbonyl DO of 0.72 and 0.23, respectively) complexed and held Fe(III) or Zn(II) ions in a soluble form effectively in 0.5 mM single ion alkaline solution with the molar ratio of 0.65:1 of oxidized starch-to-metal ion (OS-to-M). The OS-to-M molar ratio of 1.3:1 was required to form a soluble complex with Cu(II) or Ni(II) ions. These complexes were thermally stable at the temperature range of 20–60 °C. OS with the low DO (carboxyl and carbonyl DO 0.47 and 0.17, respectively) complexed Zn(II) ions highly, Cu(II) and Ni(II) ions poorly and Fe(III) ions only partly. In the multi-metal ion solution of OS the solubility of these metal ions improved with the increasing DO of starch, which followed the same tendency as was observed in the single metal ion systems. The increased molar ratio of OS-to-M improved the complexation and solubility of the metal ions in all multi-metal ion series. As the soluble multi-metal ion complexes were reanalyzed after 7 days, all solutions had kept the high complexation and solubility of metal ions (ca. 90%). Complexation by OS did not show a selective binding of the ions in the multi-metal ion solution. It was concluded that the flexible, opened ring structure units of OS prevented the selective binding to metal ions but made the complexes highly stable. Titrimetric studies of OS–Fe(III) complexation showed that each anhydroglucose unit of OS had more than one coordination site and as the content of OS increased, the free sites coordinated to Fe(III) ions and formed cross-linked starch structures.     

Synthesis and characterization of antibacterial polychelates of urea–formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions

We studied the reaction between urea and formaldehyde with the purpose of preparing new polychelates of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions. These compounds were characterized by elemental analysis, IR spectroscopy, ¹H‐NMR, electronic spectroscopy, thermogravimetric analysis (TGA), and molar conductance measurements. The percentage of metal in all of the polychelates was found to be consistent with 1:1.5 (metal/ligand) stoichiometry. The thermal behaviors of these coordination polymers were studied by TGA in a nitrogen atmosphere up to 750°C. The TGA results reveal that the complexes had higher thermal‐resistance properties compared to the common urea–formaldehyde resin. The molar conductivity and magnetic susceptibility measurements of the synthesized polychelates confirmed the geometry of the complexes. The antibacterial activity of the polychelates was also investigated with agar diffusion methods. The antibacterial activity of these polychelates was found to be reasonably good compared with standard drugs, namely, ciprofloxacin, ampicillin, and kanamycin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 928–936, 2006     

Synthesis, Characterization and Biological Evaluation of Co(II), Cu(II), Ni(II) and Zn(II) Complexes With Cephradine

Some Co(II), Cu(II), Ni(II) and Zn(II) complexes of antibacterial drug cephradine have been prepared and characterized by their physical, spectral and analytical data. Cephradine acts as bidentate and the complexes have compositions, [M(L)(2)X(2)] where [M = Co(II), Ni(II) and Zn(II), L = cephradine and X = Cl(2)] showing octahedral geometry, and [M(L)(2)] where [M = Cu(II), L = cephradine] showing square planar geometry. In order to evaluate the effect of metal ions upon chelation, eephradine and its complexes have been screened for their antibacterial activity against bacterial strains, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa.     

Syntheses and characterization of a chelating resin containing ONNO donor quadridentate Schiff base and its coordination complexes with copper(II), nickel(II), cobalt(II), iron(III), zinc(II), cadmium(II), molybdenum(VI) and uranium(VI),

A new mixed Schiff base N,N′-ethylenemono(3-carboxysalicylideneimine)mono(salicylideneimine) has been synthesized by the condensation of equimolar quantities of ethylenediamine, salicylaldehyde and 3-formylsalicylic acid. A polymer supported Schiff base (PS–CH₂–LH₂) has been synthesized by the reaction of chloromethylated polystyrene (containing 3.9 mmol of chlorine per g of resin and 2% cross-linked with divinylbenzene) and the Schiff base N,N′-ethylenemono(3-carboxysalicylideneimine)mono(salicylideneimine). The polymer-anchored Schiff base reacts with metal salt/metal complex and forms polymer-anchored complexes having the formulae PS–CH₂–LCu, PS–CH₂–LNi, PS–CH₂–LCo, PS–CH₂–LFeCl·DMF, PS–CH₂–LZn, PS–CH₂–LCd, PS–CH₂–LMoO₂ and PS–CH₂–LUO₂. The polymer-anchored complexes have been characterized on the basis of elemental analysis, infrared and electronic spectra and magnetic susceptibility measurements. The shifts of the ν(CN) (azomethine) stretch to lower energy and ν(CO) (carboxylic) to higher energy in the polymer-anchored complexes indicate the ONNO donor behaviour of the chelating resin. The metal ions in the metal bound polymers can be leached by hot dilute formic acid, acetic acid or hydrochloric acid. The coordinated dimethylformamide is completely lost on heating the complexes in air. The complexes PS–CH₂–LCu and PS–CH₂–LCo are paramagnetic with square planar structure, PS–CH₂–LNi is diamagnetic with square planar structure and PS–CH₂–LFeCl·DMF is paramagnetic and octahedral, PS–CH₂–LZn and PS–CH₂–LCd are diamagnetic and tetrahedral, PS–CH₂–LMoO₂ and PS–CH₂–LUO₂ are diamagnetic and have octahedral structure. The stoichiometry and the structure of the metal bound polymers are comparable with those of metal complexes of N,N′-ethylenebis(salicylideneimine). This is the first report of the syntheses of a mixed Schiff base and its coordination complexes.     

Selective separation and concentration of Pd(II) from Fe(III), Co(II), Ni(II), and Cu(II) ions using thiourea‐formaldehyde resin

Thiourea‐formaldehyde (TUF), a well‐known chelating resin, has been synthesized and it was used in the adsorption, selective separation, and concentration of Pd(II) ions from Fe(III), Co(II) Ni(II), and Cu(II) base metal ions. The composition of the synthesized resin was determined by elemental analysis. The effect of initial acidity/pH and the adsorption capacity for Pd(II) ions were studied by batch technique. The adsorption and separation of Pd(II) were then examined by column technique. FTIR spectra and SEM/EDS analysis were also recorded before and after the adsorption of Pd(II). The optimum pH was found to be 4 for the adsorption. The adsorption data fitted well to the Langmuir isotherm. The maximum adsorption capacity of the TUF resin for Pd(II) ions was found to be 31.85 mg g⁻¹ (0.300 mmol g⁻¹). Chelating mechanism was effective in the adsorption. Pd(II) ions could be separated efficiently from Fe(III), Cu(II), Ni(II), and Co(II) ions using TUF resin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Electrophoretic studies of mixed ligand complexes in solution—copper(II), nickel(II), cobalt(II), uranyl(II) and thorium(IV)—tartarate—nitrilotriacetate

Paper electrophoresis has been used for the study of the equilibria in mixed ligand complex systems in solution. The method is based on the migration of a spot of a metal ion, with the complexants added in the background electrolyte (0.1 M perchloric acid), at a fixed pH. The concentration of one of the complexants [A] is kept constant, while that of second ligand [L] is varied. A graph of—log [L] against mobility is used to obtain information on the formation of the mixed ligand complex, and to calculate the stability constant. Using this technique, the values of overall stability constant of the complex metal—tartarate—nitrilotriacetate have been found to be 10^12.25, 10^5.98, 10^?3.56, and 10^3.74 for Cu(II), Ni(II), Co(II), UO₂(II) and Th(IV) complexes, respectively at μ = 0.1 and temp. = 40°C.