一种基于速率线性化的非线性预测控制算法

提出了一种基于速率线性化方法的非线性预测控制算法。该算法采用速率线性化方法得到与原系统非线性模型相对应的线性变参数模型,这类变参数模型在结构上是线性的,而模型参数将随工作条件的变化而变化,在系统的整个工作区间内都能很好地逼近原非线性模型。在此模型的基础上设计了预测控制器,并利用基于置信域的Levenberg-Marquardt算法在线求得预测控制率。最后对连续搅拌反应釜进行了仿真研究,仿真结果表明了该算法的可行性和有效性。     

基于T-S模糊模型与粒子群优化的非线性预测控制

引言模型预测控制属于一种基于模型的多变量的控制算法,发展至今已在化工过程控制方面得到了广泛的应用[1-5]。状态反馈预测控制[6-8]是模型预测控制技术的一种,基于状态空间模型,采用实测状态     

Nonlinear predictive control using multi-rate sampling

A nonlinear predictive control (NLPC) strategy based on a nonlinear, lumped parameter model of the process is developed in this paper. A constrained optimization approach is used to estimate unmeasured state variables and load disturbances. Additional model/process mismatch is handled by using an additive output term which is equivalent to the Internal Model Control approach. Similar to linear predictive control methods, an optimal sequence of future control moves is determined in order to minimize an objective function based on a desired output trajectory, subject to manipulated variable constraints (absolute and velocity). Deadtime is explicitly included in the model formulation, giving NLPC the same deadtime compensation feature of linear model-predictive techniques. The multi-rate sampling nature of most chemical processes is also used to improve estimates of process disturbances. Infrequent composition measurements in conjunction with frequent temperature measurements are used to improve the “inferential” control of the composition in a continuous flow stirred tank reactor (CSTR).     

NONLINEAR MODEL PREDICTIVE CONTROL

Nonlinear Model Predictive Control (NMPC), a strategy for constrained, feedback control of nonlinear processes, has been developed. The algorithm uses a simultaneous solution and optimization approach to determine the open-loop optimal manipulated variable trajectory at each sampling instant. Feedback is incorporated via an estimator, which uses process measurements to infer unmeasured state and disturbance values. These are used by the controller to determine the future optimal control policy. This scheme can be used to control processes described by different kinds of models, such as nonlinear ordinary differential/algebraic equations, partial differential/algebraic equations, integra-differential equations and delay equations. The advantages of the proposed NMPC scheme are demonstrated with the start-up of a non-isothermal, non-adiabatic CSTR with an irreversible, first-order reaction. The set-point corresponds to an open-loop unstable steady state. Comparisons have been made with controllers designed using (1) nonlinear variable transformations, (2) a linear controller tuned using the internal model control approach, and (3) open-loop optimal control. NMPC was able to bring the controlled variable to its set-point quickly and smoothly from a wide variety of initial conditions. Unlike the other controllers, NMPC dealt with constraints in an explicit manner without any degradation in the quality of control. NMPC also demonstrated superior performance in the presence of a moderate amount of error in the model parameters, and the process was brought to its set-point without steady-state offset.     

混杂系统基于参数规划的状态反馈预测控制

In this article, state feedback predictive controller for hybrid system via parametric programming is proposed. First, mixed logic dynamic （MLD） modeling mechanism for hybrid system is analyzed, which has a distinguished advantage to deal with the logic rules and constraints of a plant. Model predictive control algorithm with moving horizon state estimator （MHE） is presented. The estimator is adopted to estimate the current state of the plant with process disturbance and measurement noise, and the state estimated are utilized in the predictive controller for both regulation and tracking problems of the hybrid system based on MLD model. Off-line parametric programming is adopted and then on-line mixed integer programming problem can be treated as the parameter programming with estimated state as the parameters. A three tank system is used for computer simulation, results show that the proposed MHE based predictive control via parametric programming is effective for hybrid system with model/olant mismatch, and has a potential for the engineering applications.     

基于2次核SVM的单步非线性模型预测控制

A support vector machine (SVM) with quadratic polynomial kernel function based nonlinear model one-step-ahead predictive controller is presented. The SVM based predictive model is established with black-box identification method. By solving a cubic equation in the feature space, an explicit predictive control law is obtained through the predictive control mechanism. The effect of controller is demonstrated on a recognized benchmark problem and on the control of continuous-stirred tank reactor (CSTR). Simulation results show that SVM with quadratic polynomial kernel function based predictive controller can be well applied to nonlinear systems, with good performance in following reference trajectory as well as in disturbance-rejection.     

基于Hammerstein-Wiener模型的连续搅拌反应釜神经网络预测控制

针对化工过程中广泛使用的连续搅拌反应釜(CSTR),提出一种基于神经网络的模型预测控制策略,采用分段最小二乘支持向量机辨识Hammerstein-Wiener模型系数的方法,在此基础上建立线性自回归模式〖DK〗(ARX)结构和高斯径向基神经网络串联的非线性预测控制器。利用BP神经网络训练预测控制输入序列和拟牛顿算法求解非线性预测控制律,从而实现一种基于支持向量机Hammerstein-Wiener辨识模型的非线性神经网络预测控制算法。对CSTR的仿真结果表明,该方法能够更有效地跟踪控制反应物浓度。     

对角CARIMA模型抗扰约束广义预测控制

针对存在输入和输入增量约束的多变量系统,提出了一种基于变权重的对角CARIMA模型抗扰动约束广义预测控制算法。根据对角CARIMA模型中的A和C矩阵为对角形式的特点,将多输入多输出系统分解为多个多输入单输出系统进行预测和控制,简化了控制器的设计,降低了变量之间的耦合性。根据模型预测值与参考轨迹之间的偏差实时调整目标函数中各输出跟踪误差的权重,达到抑制由耦合而造成回路之间扰动的目的。权重调整的基本原则是,每个输出的预测值跟踪参考轨迹的权重由其他输出在同时刻偏离其参考轨迹的误差平方加权和构成。当某个输出偏离其目标值时,其他输出的控制作用相对增强,避免输出之间的相互扰动,达到抑制扰动的目的。同时,分析了系统输入和输入增量约束的表达形式。利用多变量广义预测控制（MGPC）以及提出的扰动抑制方法,分别对Shell重油分馏问题进行了仿真实验,仿真结果验证了算法的有效性。     

基于多核支持向量机的非线性模型预测控制

Multi-kernel-based support vector machine （SVM） model structure of nonlinear systems and its specific identification method is proposed, which is composed of a SVM with linear kernel function followed in series by a SVM with spline kernel function. With the help of this model, nonlinear model predictive control can be transformed to linear model predictive control, and consequently a unified analytical solution of optimal input of multi-step-ahead predictive control is possible to derive. This algorithm does not require online iterative optimization in order to be suitable for real-time control with less calculation. The simulation results of pH neutralization process and CSTR reactor show the effectiveness and advantages of the presented algorithm.     

改进的模糊预测控制算法及其在CSTR过程中的应用

A finite horizon predictive control algorithm,which applies a saturated feedback control law as its local control law,is presented for nonlinear systems with time-delay subject to input constraints.In the algorithm,N free control moves,a saturated local control law and the terminal weighting matrices are solved by a minimization problem based on linear matrix inequality(LMI) constraints online.Compared with the algorithm with a nonsaturated local law,the presented algorithm improves the performances of the closed-loop systems such as feasibility and optimality.This model predictive control(MPC) algorithm is applied to an industrial continuous stirred tank reactor(CSTR) with explicit input constraint.The simulation results demonstrate that the presented algorithm is effective.     

Data‐driven model predictive quality control of batch processes

The problem of driving a batch process to a specified product quality using data‐driven model predictive control (MPC) is described. To address the problem of unavailability of online quality measurements, an inferential quality model, which relates the process conditions over the entire batch duration to the final quality, is required. The accuracy of this type of quality model, however, is sensitive to the prediction of the future batch behavior until batch termination. In this work, we handle this “missing data” problem by integrating a previously developed data‐driven modeling methodology, which combines multiple local linear models with an appropriate weighting function to describe nonlinearities, with the inferential model in a MPC framework. The key feature of this approach is that the causality and nonlinear relationships between the future inputs and outputs are accounted for in predicting the final quality and computing the manipulated input trajectory. The efficacy of the proposed predictive control design is illustrated via closed‐loop simulations of a nylon‐6,6 batch polymerization process with limited measurements. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2852–2861, 2013     

APPLICATION OF FUZZY ADAPTIVE CONTROLLER IN NONLINEAR PROCESS CONTROL

In general, physical processes are usually nonlinear and control system design based on the linearization technique cannot control the process well for a wide range of operation. Use of the variable transformation method may not always solve the problem. In this paper, a fuzzy adaptive controller is proposed to control the nonlinear process. The CSTR control problem has also been considered. The results are compared with the method of nonlinear model predictive control (NMPC) with constrained and unconstrained control variables. A fuzzy model-following control system scheme is also proposed. The results show that the proposed controller is a feasible control structure for a nonlinear or parameter-variations process control.     

Application of state estimation based NMPC to an unstable nonlinear process

Model predictive control (MPC) has become very popular both in process industry and academia due to its effectiveness in dealing with nonlinear, multivariable and/or hard-constrained plants.Although linear MPC can be applied for controlling nonlinear processes by obtaining a linearized model of the plant, this is only valid in a limited region. Therefore, a substantial improvement can be achieved by using the whole knowledge of the process dynamics, specially in the presence of marked nonlinearities. This effect can be strong if the process to control is open-loop unstable.The purpose of this paper is to introduce a nonlinear model predictive controller (NMPC) based on nonlinear state estimation, in order to exploit the knowledge of the nonlinear dynamics and to avoid modeling simplifications or linearization.A state-space formulation is proposed to achieve the control objective. To update the optimization involved in NMPC strategy, state estimation based on the measured outputs is proposed.As a particular application, we consider an open-loop unstable jacketed exothermic chemical reactor. This CSTR is widely recognized as a difficult problem for the purpose of control. In order to achieve the control goal, a NMPController coupled with a state observer are designed. The observer is also used to estimate some unmeasured disturbances. Finally, computer simulations are developed for showing the performance of both the nonlinear observer and the control strategy.     

Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model

Weight is an important quality characteristic of injection‐molding products. The current work focuses on the online prediction and closed‐loop control of the product weight. Previous researchers used the process set‐points as the inputs to establish weight prediction model. These models cannot reflect the weight variations at a given setting. In this study, an online weight prediction model has been developed, with the process variable trajectories as the inputs, using a principal component regression (PCR) model. A nonlinear enhancement has been made to improve the prediction accuracy of the PCR weight model. Based on such an online prediction, a closed‐loop weight control system has been developed and tested experimentally. POLYM. ENG. SC. 46:540–548, 2006. © 2006 Society of Plastics Engineers     

Sequential and iterative architectures for distributed model predictive control of nonlinear process systems

In this work, we focus on distributed model predictive control of large scale nonlinear process systems in which several distinct sets of manipulated inputs are used to regulate the process. For each set of manipulated inputs, a different model predictive controller is used to compute the control actions, which is able to communicate with the rest of the controllers in making its decisions. Under the assumption that feedback of the state of the process is available to all the distributed controllers at each sampling time and a model of the plant is available, we propose two different distributed model predictive control architectures. In the first architecture, the distributed controllers use a one‐directional communication strategy, are evaluated in sequence and each controller is evaluated only once at each sampling time; in the second architecture, the distributed controllers utilize a bi‐directional communication strategy, are evaluated in parallel and iterate to improve closed‐loop performance. In the design of the distributed model predictive controllers, Lyapunov‐based model predictive control techniques are used. To ensure the stability of the closed‐loop system, each model predictive controller in both architectures incorporates a stability constraint which is based on a suitable Lyapunov‐based controller. We prove that the proposed distributed model predictive control architectures enforce practical stability in the closed‐loop system and optimal performance. The theoretical results are illustrated through a catalytic alkylation of benzene process example. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

PVC反应釜釜温自抗扰控制器设计

针对反应釜釜温过程控制中存在时变性、非线性、不确定性和多干扰性的问题,在分析自抗扰技术的基础上,采用PD控制器代替非线性反馈部分对补偿后的串联积分式对象进行控制的方法,设计了反应釜釜温动态模型的自抗扰控制器。仿真结果表明：在缺乏对象精确数学模型的情况下,该系统表现出良好的静、动态品质。同时,通过Monte—Carlo实验方法验证了系统具有较强的鲁棒性。     

Nonlinear stochastic modeling to improve state estimation in process monitoring and control

State estimation from plant measurements plays an important role in advanced monitoring and control technologies, especially for chemical processes with nonlinear dynamics and significant levels of process and sensor noise. Several types of state estimators have been shown to provide high‐quality estimates that are robust to significant process disturbances and model errors. These estimators require a dynamic model of the process, including the statistics of the stochastic disturbances affecting the states and measurements. The goal of this article is to introduce a design method for nonlinear state estimation including the following steps: (i) nonlinear process model selection, (ii) stochastic disturbance model selection, (iii) covariance identification from operating data, and (iv) estimator selection and implementation. Results on the implementation of this design method in nonlinear examples (CSTR and large dimensional polymerization process) show that the linear time‐varying autocovariance least‐squares technique accurately estimates the noise covariances for the examples analyzed, providing a good set of such covariances for the state estimators implemented. On the estimation implementation, a case study of a chemical reactor demonstrates the better capabilities of MHE when compared with the extended Kalman filter. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

连续搅拌釜式反应器的鲁棒最优控制

针对一类带不确定性的连续搅拌釜式反应器,提出基于滑模控制理论的鲁棒最优控制算法。输入输出线性化方法用于线性化对象模型,假设系统的不确定因素有界,滑模面采用积分型滑模面以确保系统稳态误差为零,将线性二次型理论用于等效控制律的设计中,保证了系统的性能指标最优,自适应滑模切换控制增益的选取在降低系统抖振的前提下补偿了系统的不确定因素及外部扰动,实现了控制器的鲁棒最优。通过仿真实验表明,提出的控制器对匹配的不确定性因素及外部扰动具有鲁棒性,且闭环系统的性能指标最优。     

DISTURBANCE COMPENSATION FOR NONLINEAR PROCESSES

This paper focuses on the feedback linearization of nonlinear processes with external measurable and immeasurable disturbances. The proposed disturbance compensator, based on a set of the adjustable parameters, is used as a technique to robustify the cancellation of nonlinear terms under a suitable tuning framework. The bound for the adjustable parameters is given to ensure the stability of the closed-loop system. The proposed methodology is applied to the composition control of a CSTR, such that the output regulation and system robustness are achieved. Computer simulation shows results in satisfactory control.