Spectrophotometric determination of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3- H-indol-2-ylidene)propenyl]-3 H-indolium

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of manganese in sewage. The method is based on the reaction of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3-H-indol-2-ylidene)propenyl]-3H-indolium to form a colored ion associate with a sensitive absorption maximum at 560 nm. The appropriate reaction conditions have been established: pH 8.5–10.0, 1.25–2.3×10^–3 mol L^–1 1-nitroso-2-naphthol, and 1.6–2.4×10^–4 mol L^–1 dye reagent. Beer's law is obeyed for manganese concentrations up to 4.2 mg L^–1. The limit of detection is 0.01 mg L^–1 Mn²⁺; the molar absorptivity of the ion associate was 7.5×10⁴ L mol^–1 cm^–1. The effect of various foreign ions was examined. A reaction mechanism is suggested. The developed procedure was tested for determination of manganese in sewage with satisfactory precision and accuracy.     

Extraction-spectrophotometric determination of trace iron (II) in sea water with 2-[2-(3,5-dibromopyridyl)azo]-5-diethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of iron(II) with 2-[2-(3,5-dibromopyridyl)azo]-5-diethyl-aminobenzoic acid. The reagent forms a stable and blue 12 iron/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the iron(II) complex is 1.09 × 10⁵ 1 mol^–1 cm^–1 at 624 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper, nickel and vanadium can be removed by using dimethylglyoxime and EDTA. The method is applied to the determination of iron (II) in sea water and aluminium alloys with good precision and accuracy.     

Determination of Lead Using a New Chromogenic Reagent 2-(2-Sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic Acid

A novel chromogenic reagent, 2-(2-sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid 1, was prepared by diazo coupling of 4-acetylaniline-2-sulfonic acid and 2,4,6-trichloroaniline to chromotropic acid through –N=N– groups. Based on this reagent, a simple, sensitive and selective spectrophotometric method was developed for the determination of lead. In 0.20M phosphoric acid medium, lead reacts with 1 to form a 1:2 blue complex with an absorption maximum of 654nm. Beers law is obeyed in the range of 0–0.6mgL^–1 of lead. The apparent molar absorptivity is 1.25×10⁵Lmol^–1cm^–1. The detection limit and quantification limit were found to be 0.63µgL^–1 and 2.1µgL^–1, respectively. The relative standard deviation for eleven replicate measurements was of 2.6%. The interference of foreign ions was also investigated. All the other foreign ions studied did not interfere with lead determination except for Ca(II) and Ba(II). The interference caused by Ca(II) and Ba(II) can be eliminated by prior extraction of lead with potassium iodide-methylisobutylketone (KI-MIBK). The proposed method was applied to the determination of lead in certified samples with satisfactory results.     

Flotation and spectrophotometric determination of silver with 4-(p-nitrophenylazo)-2-amino-3-pyridinol

A sensitive flotation-spectrophotometric method, based on the complex formed between Ag(I) and 4-(p-nitrophenylazo)-2-amino-3-pyridinol is described. The complex precipitates when the aqueous solution is shaken with benzene, and the solid formed is then dissolved in dimethylformamide. The molar absorptivity of the resulting solution is 10.7×10⁴l·mole^–1·cm^–1 at 605 nm. Beer's law is obeyed between 0.08 and 1 ppm of silver. The molar ratio of Agreagent in the separated complex is 12. The effect of foreign ions has been determined and the proposed method can be applied to determination of silver in an exhausted photographic developing solution.     

Thermodynamics of complexation of lanthanides and some of transition metal ions by 5,5-dimethyl-cyclohexane-2-(2-hydroxyphenyl)-hydrazono-1,3-dione (DCPHD) and its derivatives

Summary Equilibrium betweenDCPHD,DC-4-Cl-PHD, andDC-4-Me-PHD and protons, transition, and lanthanide ions have been investigated at 30 °C by means of potentiometric titration in 75% (v/v) methanol-water mixture containing 0.10M KNO₃ as a constant ionic medium. Thermodynamic parameters (G, H and S) referring to the formation of species HL ^–,L ^––,ML ^+n–2 andML ₂ ^+n–4 (L ^–– denotes the ligand anion) have been determined in solutions. The solvent effects on the thermodynamic parameters of the complex formation are discussed in terms of differences in the donor ability of methanol and water solvents. The plots of thermodynamic parameters versus ionic potential (Z ²/r) of the lanthanide elements is not linear as expected from ionic theory. The obtained curve can be resolved in an initial group (the lighter lanthanides), an intermediate group (Sm-Dy), and a final group (the heavier ones, Tb-Lu). This behavior was explained in terms of differences in the dehydration of lighter lanthanide(III) from that of heavier ones.

---

Thermodynamik der Komplexierung von Lanthaniden und einigen Übergangsmetall-Ionen mit 5,5-Dimethylcyclohexyl-2-(2-hydroxyphenyl)-hydrazono-1,3-dion (DCPHD) und seinen Derivaten

Zusammenfassung Die Gleichgewichte zwischenDCPHD,DC-4-Cl-PHD undDC-4-Me-PHD mit Protonen, Übergangsmetall- und Lanthaniden-Ionen wurden bei 30 °C mittels potentiometrischer Titration in 75% (v/v) Methanol-Wasser mit einem Gehalt an 0.10M KNO₃ als konstantem ionischem Medium untersucht. Die thermodynamischen Parameter G, H und S zur Bildung der Spezies HL ^–,L ^––,ML ^+n–2 undML ₂ ^+n–4 (L ^–– steht für das Ligandenanion) wurden in Lösung bestimmt. Die Lösungsmitteleffekte auf diese Komplexbildungsparameter werden auf Basis der Differenz im Donorvermögen von Methanol und Wasser als Solventien diskutiert. Die Diagramme der thermodynamischen Parameter gegen die ionischen Potentiale (Z ²/r) der Lanthaniden sind, wie nach der Ionentheorie zu erwarten, nicht linear. Die erhaltene Kurve läßt eine Anfangsgruppe (die leichteren Lanthaniden), eine mittlere Gruppe (Sm-Dy) und eine Endgruppe (die schwereren Lanthaniden. Tb-Lu) erkennen. Dieses Verhalten kann aus dem Unterschied im Dehydratationsverhalten erklärt werden.

     

Crystal structure of 1-(2-pyridiniomethyl)-2,4-<Emphasis Type="Italic">bis</Emphasis>(phenylsulfonyl)benzene bromide

The crystal structure of 1-(2-pyridiniomethyl)-2,4-bis(phenylsulfonyl)benzene bromide, (C₂₄H₂₀NO₄S₂)⁺. Br^– (I) has been investigated by X-ray diffraction (XRD)analysis. The triclinic structure of I (space group P1, a = 7.863 , b = 8.350 , c = 9.043 , = 94.00°, = 97.81°, = 104.62°, Z = 1) was solved by direct methods and refined by full-matrix least-squares analysis in an anisotropic approximation to R = 0.048 for all 4570 reflections collected (CAD-4 automatic diffractometer, CuK ). The geometrical parameters of the organic cation were determined with a sufficient degree of accuracy. The crystal structure of I involves a very strong interionic hydrogen bond N⁺-HBr^–.Original Russian Text Copyright © 2004 by A. N. ChekhlovTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 759–763, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Complex formation of certain rare earth metals with 1-(2-pyridylazo)-2-naphthol (PAN) in alcohol-water solutions

The formation ofPAN complexes in the systems:Ln(III)—PAN—alcohol—water [whereLn(III) = Pr, Nd, Sm, Eu, Gd, Tb, alcohol - ethanol andLn(III) = Eu, alcohol =n-propanol, isopropanol] was investigated by a spectrophotometric method. Equilibrium constants for the reactionLn ³⁺+HLLnL ²⁺+H⁺ (HL =PAN) and stability constants of complexesLnL ²⁺ are reported.

---

Komplexbildung einiger Seltenerdmetalle mit 1-(2-Pyridylazo)-2-naphthol (PAN) in alkoholisch-wäßrigen Lösungen

Zusammenfassung Die Bildung der Komplexe vonPAN in den SystemenLn(III)—PAN—Alkohol—Wasser [Ln(III) = Pr, Nd, Sm, Eu, Gd, Tb, Alkohol = Ethanol undLn(III) = Eu, Alkohol =n-Propanol, Isopropanol] wurde mit einer spektrophotometrischen Methode untersucht. Die Gleichgewichtskonstanten der ReaktionenLn ³⁺+HLLnL ²⁺+H⁺ (HL =PAN) und die Stabilitätskonstanten der KomplexeLnL ²⁺ wurden berechnet.

     

Extraction-spectrophotometric determination of iron with 2-(2′-benzothiazolylazo)-4,6-dimethylphenol

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(2-benzothiazolylazo)-4,6-dimethylphenol (BTADMP) from a pH 6.5 medium has been developed. The extracted 12 FeBTADMP complex species allow the determination of 4–30gmg of iron (=3.92×10⁴1·mol^–1·cm^–1 at 790 nm). The method is highly selective and has been applied to the determination of iron in polymineral-polyvitamin pharmaceutical products.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

Investigation of 2-[2-(4-Methoxy-phenylamino)-vinyl]-1,3,3-trimethyl-3H-indolium Chloride as a New Reagent for the Determination of Chromium(VI)

 The complex formation and extraction of chromium(VI) with 2-[2-(4-methoxy-phenylamino)-vinyl]-1,3,3-trimethyl-3H-indolium chloride reagent was studied by means of spectrophotometry. The influence of medium acidity, the concentration of chloride ions and dye reagent, the nature of the extractant and some other factors (time of extraction, stability of color, interference, etc.) on the absorbance of colored extracts were studied. The optimum conditions were found to be 0.02–0.1 M H₂SO₄, 1.0–1.5 M NaCl, (2.0–2.5) × 10⁻⁴ M of reagent. The absorbance of the colored extracts obeys Beer’s Law in the range of 0.26–7.28 mg L⁻¹. The procedure of Cr(VI) extraction and spectrophotometric determination was examined. Author for correspondence. E-mail: andruch@kosice.upjs.sk Received November 19, 2002; accepted March 10, 2003 Published online June 13, 2003     

2-[2-(6-Methylbenzothiazolyl)azo]-5-Diethylaminobenzoic acid as a new analytical reagent for the spectrophotometric determination of nickel

A new thiazolylazo chromogenic reagent, 2-[2-(6-methylbenzo-thiazoly)azo]-5-diethylaminobenzoic acid (6-Me-BTAEB), has been synthesized. Its chromogenic reaction with microamounts of nickel in the presence of sodium dodecylsulfate (SDS) has been thoroughly studied. 6-Me-BTAEB reacts with nickel(II) in weak acid medium containing appropriate amounts of SDS to form a blue-violet complex with high sensitivity, good selectivity and high stability. The composition is found to be 1:2 (nickel to 6-Me-BTAEB) and its absorption maximum is at 650 nm with an apparent molar absorptivity of 1.67 × 10⁵l mole^–1 cm^–1. Beer's law is obeyed over the range 0-0.4 g of nickel per ml. The proposed method has been applied to the direct determination of nickel in aluminium alloys, pure magnesium and low alloy steels at the 0.2–0.3% (w:w) level with satisfactory results.     

Benzeneacetaldehyde-4-hydroxy-alpha-oxo-aldoxime as a new analytical reagent for the spectrophotometric determination of cobalt

Benzeneacetaldehyde-4-hydroxy-α-oxo-aldoxime is proposed as a new sensitive and selective reagent for the spectrophotometric determination of cobalt. The reagent reacts with cobalt in the pH range 8.6–9.4 to form a yellow colored 1:3 chelate which is very well extracted in chloroform. Beer's law is obeyed in the concentration range 0.05–1.3 μg ml⁻¹ cobalt. The molar absorptivity of the extracted species is 2.746×10⁴ l mol⁻¹ cm⁻¹ at 390 nm. The proposed method is highly sensitive, selective, simple, rapid, accurate and has been satisfactorily applied for the determination of cobalt in synthetic mixtures, pharmaceutical samples, biological samples and alloys.     

Screen‐Printed Disposable Sensors Modified with Bismuth Precursors for Rapid Voltammetric Determination of 3 Ecotoxic Nitrophenols

This work reports the application of screen‐printed electrodes bulk‐modified with bismuth precursors to the voltammetric determination of 2‐nitrophenol (2‐NP), 4‐nitrophenol (4‐NP) and 2,4‐dinitrophenol (2,4‐DNP) in water samples. A bismuth film was formed at the electrode surface via in situ reduction of the precursor compound contained in the electrode matrix by cathodic polarization at ?1.20 V. The formation of bismuth layer at the precursor‐modified electrodes was assessed by cyclic voltammetric (CV) at different pH values and by optical techniques. The target nitrophenols were voltammetrically determined by recording their reduction peaks in the differential pulse (DP) mode. The composition and content of the precursor compounds in the printed ink and the effect of the pH of the supporting electrolyte on the DP reduction currents of the 3 target nitrophenols were studied. The limits of quantification (LOQs) in three water matrices (distilled water, tap water and surface water) were in the range 1.1–2.2 µmol L^?1_. Using a simple solid‐phase extraction (SPE) procedure with Lichrolut EN cartridges and elution with methanol, a preconcentration factor of 100 was achieved; the LOQs were 0.021, 0.027 and 0.025 µmol L^?1 for 2‐NP, 4‐NP and 2,4‐DNP, respectively. The recoveries of samples spiked with the 3 target nitrophenols at two concentration levels (0.04 and 0.1 µmol L^?1) were always >87 %.     

Development of new rat monoclonal antibodies with different selectivities and sensitivities for 2,4,6-trinitrotoluene (TNT) and other nitroaromatic compounds

Five new rat monoclonal antibodies (mAbs) for 2,4,6-trinitrotoluene (TNT) and other nitroaromatic compounds, including, especially, the metabolite 2-amino-4,6-dinitrotoluene (2-ADNT), are described. Five heterogeneous, competitive enzyme-linked immunosorbent assays (ELISAs) were developed. Assay 1 uses mAb DNT4 3F6 as recognition element and gives a standard curve for TNT in 40 mmol L^–1 phosphate buffered saline (PBS) with a test midpoint (IC₅₀) of 0.26±0.08 g L^–1 (n=20). Assay 2 (mAb DNT4 4G4) has an IC₅₀ of 0.35±0.07 g L^–1 (n=18), assay 3 (mAb DNT4 1A3) has an IC₅₀ of 0.73±0.14 g L^–1 (n=15), and assay 4 (mAb DNT4 1A7) has an IC₅₀ of 2.32±0.70 g L^–1 (n=15). Assay 5 (mAb DNT2 4B4) is very selective for 2-ADNT and has an IC₅₀ of 8.5±1.7 g L^–1 (n=15) in PBS. These antibodies for nitroaromatic compounds differ not only in their sensitivity but also in their selectivity. Major cross-reactants are 1,3,5-trinitrobenzene, 2-ADNT, 4-amino-2,6-dinitrotoluene (4-ADNT), 2,4-dinitroaniline, 3,5-dinitroaniline, and 2,6-dinitroaniline. Although assay 5 is not highly sensitive, the mAb DNT2 4B4 in this assay is highly selective for 2-ADNT. Of all the compounds tested, only 2,4-dinitroaniline and 3,5-dinitroaniline had relevant cross reactivities, 18% and about 26%, respectively. Two ELISAs, using mAbs DNT4 3F6 and DNT2 4B4, were used to analyze different concentrations of TNT and 2-ADNT, respectively, in three different surface water matrices (river and lake water). Both assays were affected by the matrix, but usually performed well (recovery within the range 70–120%). In addition, these ELISAs were used to analyze mixtures of TNT, 2-ADNT, and 4-ADNT, at three different concentrations, in the same water matrices. A different recognition pattern was clearly visible with both assays and depended on the cross reactivities of the corresponding mAb.Dedicated to the memory of Wilhelm Fresenius     

Complex formation studies on Ho(III) and Lu(III) with 1-(2-pyridylazo)-2-naphthol (PAN) in alcohol-water solutions

The formation ofPAN complexes in the systemsLn(III)—PAN—alcohol-water (where:Ln(III)=Ho, Lu and alcohol=ethanol,n-propanol,iso-propanol) was investigated by a spectrophotometric method. Equilibrium constants for the reactionLn ³⁺ + HLLnL ²⁺ + H⁺ (HL=PAN) and stability constants of complexesLnL ²⁺ were calculated.

---

Untersuchungen zur Komplexbildung von Ho(III) und Lu(III) mit 1-(2-Pyridylazo)-2-naphthol (PAN) in alkoholisch-;wä\rigen Lösungen

Zusammenfassung Die Bildung der Komplexe vonPAN in den SystemenLn(III)—PAN—Alkohol-Wasser (Ln(III)=Ho, Lu; Alkohol=Ethanol,n-Propanol,iso-Propanol) wurde mit einer spektrophotometrischen Methode untersucht. Die Gleichgewichtskonstanten der ReaktionenLn ³⁺ + HLLnL ²⁺ + H⁺ (HL==PAN) und die Stabilitätskonstanten der KomplexeLnL ²⁺ wurden berechnet.

     

A selective optical chemical sensor for 2,6-dinitrophenol based on fluorescence quenching of a novel functional polymer

A bifurcated optical fiber based chemical sensor for continuous monitoring of 2,6-dinitrophenol (2,6-DNP) has been proposed based on the reversible chemical reaction between a novel functional poly(vinyl chloride) (PVC) as the sensing material and the analytes. The functional PVC (FPVC), containing a fluorescent curcumin moiety, was synthesized by the nucleophilic substitution of a fraction of the chlorine atoms bound to the PVC backbone by curcumin. When plasticized in a membrane of 5 μm thickness, FPVC extracts 2,6-DNP from aqueous solution into the bulk membrane phase and reacts with the analyte to form a complex with low fluorescence efficiency through hydrogen bonding. Formation of the complex gave a significant fluorescence quenching which is suitable for signalling the occurrence of the host-guest interaction. At pH 3.50, the sensor exhibits a dynamic detection range from 2.5 × 10⁻⁶ to 7.0 × 10⁻³ mol L⁻¹ with a limit of detection of 1.0 × 10⁻⁶ mol L⁻¹. As 2,6-DNP can provide an optimal space geometry matches to the formation of hydrogen bonds, the sensor shows excellent selectivity for 2,6-DNP over other nitrophenols. The forward and reverse response time (t₉₅) of the sensor both was within 1 min. The repeatability, reproducibility, and lifetime of the sensor were also satisfied. The sensor was applied to determine 2,6-DNP in water samples successfully.     

Rapid spectrofluorimetric determination of lisinopril in pharmaceutical tablets using sequential injection analysis

The present work reports for the first time a simple and rapid method for the spectrofluorimetric determination of lisinopril (LSP) in pharmaceutical formulations using sequential injection analysis (SIA). The method is based on reaction of LSP with o-phthalaldehyde (OPA) in the presence of 2-mercaptoethanol (borate buffer medium, pH=10.6). The emission of the derivative is monitored at 455 nm upon excitation at 346 nm. The various chemical and physical conditions that affected the reaction were studied. The calibration curve was linear in the range 0.3–10.0 mg L^–1 LSP, at a sampling rate of 60 injections h^–1. Consumption of OPA reagent was significantly reduced compared with conventional flow injection (FI) systems, because only 50 L of OPA was consumed per run. The method was found to be adequately precise (s_r=2% at 5 mg L^–1 LSP, n=10) and the 3 detection limit was 0.1 mg L^–1. The method was successfully applied to the analysis of two pharmaceutical formulations containing LSP. The results obtained were in good agreement with those obtained by use of high-performance liquid chromatography (HPLC), because the mean relative error, e_r, was <1.8%.     

Use of ICP and XAS to determine the enhancement of gold phytoextraction by <Emphasis Type="Italic">Chilopsis linearis</Emphasis> using thiocyanate as a complexing agent

Under natural conditions gold has low solubility that reduces its bioavailability, a critical factor for phytoextraction. Researchers have found that phytoextraction can be improved by using synthetic chelating agents. Preliminary studies have shown that desert willow (Chilopsis linearis), a common inhabitant of the Chihuahuan Desert, is able to extract gold from a gold-enriched medium. The objective of the present study was to determine the ability of thiocyanate to enhance the gold-uptake capacity of C. linearis. Seedlings of this plant were exposed to the following hydroponics treatment: (1) 5 mg Au L^–1 (2.5×10^–5 mol L^–1), (2) 5 mg Au L^–1+10^–5 mol L^–1 NH₄SCN, (3) 5 mg Au L^–1+5×10^–5 mol L^–1 NH₄SCN, and (4) 5 mg Au L^–1+10^–4 mol L^–1 NH₄SCN. Each treatment had its respective control. After 2 weeks we determined the effect of the treatment on plant growth and gold content by inductively coupled plasma–optical emission spectroscopy (ICP–OES). No signs of shoot-growth inhibition were observed at any NH₄SCN treatment level. The ICP–OES analysis showed that addition of 10^–4 mol L^–1 NH₄SCN increased the concentration of gold by about 595, 396, and 467% in roots, stems, and leaves, respectively. X-ray absorption spectroscopy (XAS) studies showed that the oxidation state of gold was Au(0) and that gold nanoparticles were formed inside the plants.     

Low-temperature X-ray study of benzoid-quinoid tautomerism in crystals of 2-(N,N-diphenylhydrazinoethylidene)-3(2H)-benzo[b]thiophenone

An X-ray investigation of 2-(N,N-diphenylhydrazinoethylidene)-3(2H)-benzo[b]thiophenone was performed at room and low (–80 °C) temperatures. It was established that the structure of this compound in the crystalline state at R-20 °C is intermediate between the ketoenehydrazine and hydroxyhydrazone forms, while at –80 °C the molecular structure is completely transformed to the hydroxyhydrazone form. This confirms the dynamic nature of hydrogen atom disordering in the molecule at 20 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 104–106, January, 1995.This work was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-04355).     

Enantioselective syntheses of no-carrier-added (n.c.a.) (s)-4-chloro-2-[f] fluorophenylalanine and (s)-(α-methyl) -4-chloro-2-[f]fluorophenylalanine

(S)-4-Chloro-2-fluorophenylalanine and (S)-(α-methy)-4-chloro-2-fluorophenylalanine were synthesized and labeled with no carrier added (n.c.a.) fluorine-18 through a radiochemical synthesis relying on the highly enantioselective reaction between 4-chloro-2-[¹⁸F]fluorobenzyl iodide and the lithium enolate of (2S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3-methyl-1,3-imidazolidine-4-one for (S)-4-chloro-2-[¹⁸F]fluorophenylalanine and (2S,5S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3,5-dimethyl-1,3-imidazolidine-4-one for (S)-(α-methyl) -4-chloro-2-[¹⁸F] fluorophenylalanine. Quantities of about 20–25 mCi were obtained at the end of sy nthesi s, ready for injection after hydrolysis and high performance liquid chromatography (HPLC) purification, with a radiochemical yield of 17%–20% corrected to the end of bombardment after a total synthesis time of 90–105 min from [¹⁸F] fluoride. The enantiomeric excesses were shown to be 97% or more for both molecules without chiral separation and the radiochemical and chemical purities were 98% or better.