Enhancement of PVC/ENR blend properties by poly(methyl acrylate) grafted oil palm empty fruit bunch fiber

Effect of oil palm empty fruit bunch (OPEFB) fiber and poly(methyl acrylate) grafted OPEFB on several mechanical properties of poly(vinyl chloride)/epoxidized natural rubber (PVC/ENR) blends were studied. The composites were prepared by mixing the fiber and the PVC/ENR blends using HAKEE Rheomixer at the rotor speed of 50 rpm, mixing temperature 150°C, and mixing period of 20 min. The fiber loadings were varied from 0 to 30% and the effect of fiber content in the composites on their ultimate tensile strength (UTS), Young's modulus, elongation at break, flexural modulus, hardness, and impact strength were determined. An increasing trend was observed in the Young's modulus, flexural modulus, and hardness with the addition of grafted and ungrafted fiber to the PVC/ENR blends. However the impact strength, UTS, and elongation at break of the composites were found to decrease with the increase in fiber loading. An increase in elongation at break and UTS and decrease in the flexural and Young's modulus was observed with the addition of PMA‐g‐OPEFB fiber compared to ungrafted fiber. This observation indicates that grafting of PMA onto OPEFB impart some flexibility to the blend. The morphology of cryogenically fractured and tensile fracture surfaces of the composites, examined by a scanning electron microscope shows that the adhesion between the fiber and the matrix is improved upon grafting of the OPEFB fiber. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of silane-based coupling agents and acrylic acid based compatibilizers on mechanical properties of oil palm empty fruit bunch filled high-density polyethylene composites

The mechanical properties of composites consisting of high-density polyethylene (HDPE) and oil palm fibrous wastes—that is, empty fruit bunch (EFB)—have been investigated. Tensile modulus showed an increase, whereas tensile strength, elongation at break, and impact strength decreased with increasing filler loading. The strong tendency of EFB to exist in the form of fiber bundles and the poor filler–matrix interaction is believed to be responsible for the poor strength displayed by the composites. Attempts to improve these properties using two types of coupling agents, that is, 3-aminopropyltrimethoxysilane (3-APM) and 3-aminopropyltriethoxysilane (3-APE) and two types of compatibilizers, poly(propylene–acrylic acid) (PPAA) and poly(propylene–ethylene–acrylic acid), (PPEAA), are described. While almost all chemical treatments increased the stiffness of the composites, limited improvement has been observed in the case of tensile strength. This have been attributed to the presence of fiber bundles that remain intact even after several types of chemical treatment have been carried out. Thus, the role of EFB as reinforcing agent is not fully realized. Scanning electron microscopy (SEM) micrographs revealed that the main energy-absorbing mechanisms contributing towards toughness enhancement is through the fiber bundle pull-out process. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 2189–2203, 1998     

Effects of palm ash loading and maleated natural rubber as a coupling agent on the properties of palm‐ash‐filled natural rubber composites

Natural rubber composites were prepared by the incorporation of palm ash at different loadings into a natural rubber matrix with a laboratory‐size two‐roll mill (160 × 320 mm²) maintained at 70 ± 5°C in accordance with the method described by ASTM D 3184–89. A coupling agent, maleated natural rubber (MANR), was used to improve the mechanical properties of the natural rubber composites. The results indicated that the scorch time and cure time decreased with increasing filler loading, whereas the maximum torque exhibited an increasing trend. Increasing the palm ash loading increased the tensile modulus, but the tensile strength, fatigue life, and elongation at break decreased. The rubber–filler interactions of the composites decreased with increasing filler loading. Scanning electron microscopy of the tensile fracture surfaces of the composites and rubber–filler interaction studies showed that the presence of MANR enhanced the interfacial interaction of the palm ash filler and natural rubber matrix. The presence of MANR also enhanced the tensile properties and fatigue life of palm‐ash‐filled natural rubber composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Behavior of polyolefin blends with acetylated sisal fibers

The influence of acetylation on the mechanical, thermal and thermodegradative behavior of sisal fiber‐reinforced PP, PP/HDPE and PP/HDPE with functionalized and non‐functionalized EPR composites was studied. Acetylation of the fiber improves adhesion of the fiber to the polyolefin matrix. In general, acetylation of the sisal fiber was found to enhance the tensile strength and modulus of the resulting composites, except in some cases. Thermal properties suggest that the mixing and molding temperatures are between 160 and 230 °C and that when acetylated fiber is mixed with polyolefins, greater polymer‐fiber interactions takes place, which slightly favor stability of these composite materials. The results allow us to suggest that a satisfactory profit/cost relation justifies the addition of acetylated fiber to PP, PP/HDPE, and PP/HDPE/EPR. © 2000 Society of Chemical Industry     

Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites

Hybrid composites were fabricated by compounding process with varying the relative weight fraction of oil palm empty fruit bunch (EFB) and coir fibers to assess the effect of hybridization of oil palm EFB with coir fibers in polypropylene (PP) matrix. The mechanical and morphological properties of oil palm/coir hybrid composites were carried out. Tensile and flexural properties of oil EFB‐PP composites enhanced with hybridization of coir fibers except coir/oil palm EFB (25:75) hybrid composite, whereas highest impact properties at oil palm:coir fibers with 50:50 ratios. Results shown that hybrid composites with oil palm:coir fibers with 50:50 ratios display optimum mechanical properties. In this study, scanning electron microscopy (SEM) had been used to study morphology of tensile fractured surface of hybrid composites. Its clear from SEM micrograph that coir/EFB (50:50) hybrid composites display better tensile properties due to strong fiber/matrix bonding as compared with other formulations which lead to even and effective distribution of stress among fibers. The combination of oil palm EFB/coir fibers with PP matrix produced hybrid biocomposites material can be used to produce components such as rear mirrors' holder and window levers, fan blades, mallet, or gavel. POLYM. COMPOS., 35:1418–1425, 2014. © 2013 Society of Plastics Engineers     

Effect of fibers treatment on dynamic mechanical and thermal properties of epoxy hybrid composites

Epoxy hybrid composites fabricated by reinforcing 2‐hydroxy ethyl acrylate (2‐HEA) treated oil palm empty fruit bunch (EFB) and jute fibers. It assume that chemical modification of jute and oil palm EFB fibers increased fiber/matrix interfacial bonding and it results in enhanced thermal properties of hybrid composites. Dynamic mechanical and thermal analysis of treated hybrid composites was carried out. Results indicated that chemical modification of oil palm EFB and jute fibers affect the dynamic mechanical and thermal properties of hybrid composites. The storage modulus values of hybrid composites increases with chemical treatment and loss modulus increased with fiber treatment in hybrid composites. Damping factor peak values of treated hybrid composites shifted toward the lower temperature compared to both untreated hybrid composites. Cole–Cole analysis was made to understand the phase behaviour of the hybrid composites. Thermogravimetric analysis indicated an increased in thermal stability of hybrid composite with the incorporation of chemically modified fibers. POLYM. COMPOS., 36:1669–1674, 2015. © 2014 Society of Plastics Engineers     

The effect of compounding techniques on the mechanical properties of oil palm empty fruit bunch–polypropylene composites

Oil palm empty fruit bunch–polypropylene (EFB–PP) composites were produced by employing 2 types of compounding techniques, that is, an internal mixer and a single-screw extruder. The mechanical and water absorption properties of both types of composites were investigated. Overall, for both types of composites, the incorporation of the EFB into PP matrix has resulted in the improvement in the tensile modulus. However, the tensile strength, elongation at break, and impact strength decreased with increasing filler loading. Poor filler–matrix interaction or compatibility and, also, the size irregularity of the EFB are believed to be responsible for the poor ultimate performance. Composites produced by an internal mixer (IM) have displayed higher tensile strength, tensile modulus, and impact strength than with those produced by extrusion (EX). The better performance has been attributed to the effectiveness of the IM, which produces better compounding and improves the wetting of the filler surface. Incorporation of compatibilizer and coupling agent, that is, Epolene wax (E-43) and 3-Aminopropyl triethoxysilane (3-APE), respectively, have produced composites with improved tensile strength for both EX and IM composites. In addition, both types of treatment have resulted in an increase in tensile modulus of EX composites and impact strength of IM composites. Water absorption tests have revealed that the presence of coupling agents and compatibilizers have affected the amount of water absorbed, especially for the 3-APE-treated EFB–PP composites. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2647–2655, 1998     

Effect of Fiber Esterification on Fundamental Properties of Oil Palm Empty Fruit Bunch Fiber/Poly(butylene adipate-co-terephthalate) Biocomposites

A new class of biocomposites based on oil palm empty fruit bunch fiber and poly(butylene adipate-co-terephthalate) (PBAT), which is a biodegradable aliphatic aromatic co-polyester, were prepared using melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 wt% and characterized. Chemical treatment of oil palm empty fruit bunch (EFB) fiber was successfully done by grafting succinic anhydride (SAH) onto the EFB fiber surface, and the modified fibers were obtained in two levels of grafting (low and high weight percentage gain, WPG) after 5 and 6 h of grafting. The FTIR characterization showed evidence of successful fiber esterification. The results showed that 40 wt% of fiber loading improved the tensile properties of the biocomposite. The effects of EFB fiber chemical treatments and various organic initiators content on mechanical and thermal properties and water absorption of PBAT/EFB 60/40 wt% biocomposites were also examined. The SAH-g-EFB fiber at low WPG in presence of 1 wt% of dicumyl peroxide (DCP) initiator was found to significantly enhance the tensile and flexural properties as well as water resistance of biocomposite (up to 24%) compared with those of untreated fiber reinforced composites. The thermal behavior of the composites was evaluated from thermogravimetric analysis (TGA)/differential thermogravimetric (DTG) thermograms. It was observed that, the chemical treatment has marginally improved the biocomposites' thermal stability in presence of 1 wt% of dicumyl peroxide at the low WPG level of grafting. The improved fiber-matrix surface enhancement in the chemically treated biocomposite was confirmed by SEM analysis of the tensile fractured specimens.     

Thermoplastic Elastomer Composites of Palm Ash-Filled Ethylene Vinyl Acetate/Natural Rubber Blends: Effects of Palm Ash Loading and Size

Thermoplastic elastomer composites of ethylene vinyl acetate (EVA)/natural rubber (NR) blends filled with palm ash were prepared by melt-mixing using a Haake Rheomix Polydrive R600/610 at 120°C with rotor speed of 50 rpm for 10 minutes. Increase in palm ash loading in composites resulted in increase the value of stabilization toque, Young's modulus and swelling resistance of the composites, but decreased the tensile strength and elongation at break. Scanning electron microscope micrographs revealed that higher filler loading resulted in agglomeration of palm ash in the composites. When smaller particle size of palm ash was used, further improvement in tensile strength, elongation at break, swelling resistance and stabilization torque value were observed.     

A Preliminary Study on Ultraviolet Radiation–Cured Biofiber Composites from Oil Palm Empty Fruit Bunch

Biofiber composites, cured by ultraviolet (UV) radiation were produced using pulp made from empty fruit bunch (EFB) as the reinforcing agent and unsaturated polyester as the matrix. The EFB fibers were treated with sodium hydroxide (NaOH) solutions. The kappa number of the EFB decreased as the NaOH concentration increased. The flexural and tensile strength of the composites made from 22% NaOH-treated EFB increased as the percentage of EFB increased. Composites with 28% NaOH treated EFB had lower strength as the percentage of EFB increased. Generally, those with EFB fibers treated with 22% 15 NaOH displayed higher flexural, tensile, and impact strength and tensile modulus than those with 28% NaOH-treated fibers. No significant difference was observed for both types of composite with respect to flexural modulus and elongation at break.     

Comparative Studies on the Mechanical,Degradation and Interfacial Properties between Jute and E-Glass Fiber-Reinforced PET Composites

Jute fiber mat (hessian cloth) reinforced PET-based composites (50% fiber by weight) and E-glass fiber matreinforced PET based composites (50% fiber by weight) were fabricated by compression molding and the mechanical properties tensile strength (TS), tensile modulus (TM), elongation at break (%), bending strength (BS), bending modulus (BM), impact strength (IS) and hardness (Shore-A) of the composites were evaluated and compared. The interfacial properties of the both composites were also compared. Water uptake test and soil degradation test were also investigated.     

Curing Characteristics and Mechanical Properties of Oil Palm Wood Flour Reinforced Epoxidized Natural Rubber Composites

Abstract

The paper reports on the curing characteristics and mechanical properties of oil palm wood flour (OPWF) reinforced epoxidized natural rubber (ENR) composites. Three sizes of OPWF at different filler loadings were compounded with a two roll mill. The cure (t ₉₀) and scorch times of all filler size decrease with increasing OPWF loading. Increasing OPWF loading in ENR compound resulted in reduction of tensile strength and elongation at break but increased tensile modulus, tear strength and hardness. The composites filled with smaller OPWF size showed higher tensile strength, tensile modulus and tear strength. Scanning electron microscope (SEM) micrographs showed that at lower filler loading the fracture of composites occurred mainly due to the breakage of fibre with minimum pull-out of fibres from the matrix. However as the filler loading is increased, the fibre pull-out became very prominent due to the lack of adhesion between fibre and rubber matrix.     

Effect of filler loading and coconut oil coupling agent on properties of low‐density polyethylene and palm kernel shell eco‐composites

Palm kernel shell (PKS), a waste from the oil palm industry, has been utilized as filler in low‐density polyethylene (LDPE) eco‐composites in the present work. The effect of PKS content and coconut oil coupling agent (COCA) on tensile properties, water absorption, and morphological and thermal properties of LDPE/PKS eco‐composites was investigated. The results show the increase of PKS content decreased the tensile strength and elongation at break, but increased the tensile modulus, crystallinity, and water absorption of eco‐composites. The presence of COCA as coupling agent improved the filler‐matrix adhesion yield to increase the tensile strength, tensile modulus, crystallinity, and reduced water absorption of eco‐composites. The better interfacial adhesion between PKS and LDPE with the addition of COCA was also evidenced by scanning electron microscopy studies. J. VINYL ADDIT. TECHNOL., 22:200–205, 2016. © 2014 Society of Plastics Engineers     

The Physical Properties of Oil Palm Empty Fruit Bunch (EFB) Composites Made from Various Thermoplastics

Abstract

Oil palm empty fruit bunch (EFB)-based composites were produced using different types of thermoplastic as matrices. The composites were produced by using an internal mixer. The mechanical and water absorption properties of composites were investigated. Overall, the incorporation of EFB into the polymer matrix has resulted in the reduction of flexural strength. The poor performance has been attributed to the poor filler-matrix interaction. Both flexural and tensile modulus of PE and PP composites have been improved upon the addition of fillers, however, both PS and PVC composites showed a decreasing trend. Tensile strength and elongation at break results for all composites have been reduced as the result of incorporation of filler. This has been attributed to the poor filler-matrix interaction or compatibility, size irregularity and also decreased ductile deformation. Water absorption and thickness swelling increased as the filler loading is increased. This has been attributed to the presence of hyrophillic hydroxyl groups of the filler.     

剑麻增强醋酸纤维素复合材料的制备与性能研究

对剑麻(SF)进行乙醚化处理以改性纤维结钩和性能,得到改善纤维(ASF)。并通过挤出、模压工艺制备了剑麻增强醋酸纤维索(CA)复合材料。从纤维长度、结钩、热性能等力一面研究改性和加工工艺对SF的影响,同时研究了复合材料的力学性能。研究结果表明,SF和ASF使复合材料的拉伸性能和弯曲性能都得到了一定的增强。尽管ASF/CA复合材料在强度和模量上比SF/CA复合材料硝有逊色,但是由于ASF与基体相容性提高、柔韧性改善,从而其ASF/CA复合材料在断裂伸长率和冲山性能上优于SF/CA复合材料。     

Studies on the properties of polypropylene/(waste tire dust)/kenaf (PP/WTD/KNF) composites with addition of phthalic anhydride (PA) as a function of KNF loading

The properties of polypropylene/(waste tire dust)/kenaf (PP/WTD/KNF) composites with the addition of phthalic anhydride (PA) as a function of KNF loading were studied. Composites containing constant PP and WTD compositions of 70 and 30 parts by weight per hundred parts of resin (phr), with various KNF loadings (0, 5, 10, 15, and 20 phr), were prepared by using a Thermo‐Haake Polydrive internal mixer at a temperature of 180°C with a rotor speed of 50 rpm. The results showed that tensile strength and elongation at break decreased, while tensile modulus, stabilization torque, water absorption, and thermal stability increased with increased KNF loading. PP/WTD/KNF composites with PA showed higher tensile strength, tensile modulus, and water uptake but lower stabilization torque and elongation at break when compared with PP/WTD/KNF composites. Scanning electron microscopy morphological study on the tensile fractured surface proves that the interfacial adhesion between PP/WTD and KNF was enhanced with the addition of PA. J. VINYL ADDIT. TECHNOL., 20:193–200, 2014. © 2014 Society of Plastics Engineers     

Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches

The influence of oil palm empty fruit bunch (OPEFB) fiber and oil palm empty fruit bunches grafted with poly(methyl methacrylate) (OPEFB‐g‐PMMA) on the tensile properties of poly(vinyl chloride) (PVC) was investigated. The OPEFB‐g‐PMMA fiber was first prepared with the optimum conditions for the grafting reaction, which were determined in our previous study. To produce composites, the PVC resin, OPEFB‐g‐PMMA fiber or ungrafted OPEFB fiber, and other additives were first dry‐blended with a laboratory blender before being milled into sheets on a two‐roll mill. Test specimens were then hot‐pressed, and then the tensile properties were determined. A comparison with the composite filled with the ungrafted OPEFB fiber showed that the tensile strength and elongation at break increased, whereas Young's modulus decreased, with the incorporation of 20 phr OPEFB‐g‐PMMA fiber into the PVC matrix. The trend of the tensile properties obtained in this study was supported by functional group analysis, glass‐transition temperature measurements, and surface morphological analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of polychloroprene nanocomposites with cellulose nanofibers from oil palm empty fruit bunches as a nanofiller

Cellulose nanofibers (CNFs) from oil palm empty fruit bunches were chemically modified by acetylation with acetic anhydride and pyridine (as the solvent and catalyst). The acetylated CNFs showed good dispersion in a polychloroprene (PCR) matrix. The tensile strength and modulus of neat PCR were improved, whereas its elongation at break decreased with increasing nanofiber content. Above the glass‐transition temperature (T_g), the dynamic mechanical analysis profiles showed that the storage modulus of the PCR–cellulose nanocomposites was higher than that of neat PCR. Meanwhile, the thermal stability was still maintained, and the T_g was close to the neat PCR at the 5 wt % addition level of CNFs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40159.     

The Effect of Rice Husk Powder on Standard Malaysian Natural Rubber Grade L (SMR L) and Epoxidized Natural Rubber (ENR 50) Composites

The effects of rice husk powder (RHP) loading and two types of natural rubber matrix (SMR L and ENR 50) on curing characteristics and mechanical properties were studied. The scorch time and cure time decreased with increasing RHP loading whereas maximum torque showed an increasing trend. SMR L composites possessed longer scorch time and cure time than ENR 50 composites. Incorporation of RHP into both rubbers improved tensile modulus significantly but decreased tensile strength and elongation at break. SMR L composites exhibited the lower tensile modulus and higher tensile strength and elongation at break than ENR 50 composites.     

Tensile properties,swelling, and water absorption behavior of rice‐husk‐powder‐filled polypropylene/(recycled acrylonitrile‐butadiene rubber) composites

The effect of rice husk powder (RHP) on the tensile properties, swelling, water absorption, and morphology of polypropylene (PP)/[recycled acrylonitrile‐butadiene rubber (NBRr)]/RHP composites was studied. Composites containing 0 to 30 parts of RHP per hundred parts of resin were prepared by using a Haake Rheomix Polydrive R 600/610 mixer at 180°C with a rotor speed of 50 rpm. Results indicated that the tensile strength and elongation at break decreased but that the tensile modulus increased with increasing amounts of RHP. Swelling of the PP/NBRr/RHP composites in oil and toluene increased with increasing RHP contents, and the composites exhibited a non‐Fickian diffusion with a two stage absorption mechanism. Micrographs acquired by SEM revealed an increasing number of voids and micro‐holes on the tensile‐fractured surfaces of the composites with increasing amounts of RHP. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers