Camellia oleifera Abel shells as a new biosorbent to remove methylene blue from aqueous solutions

This study aimed at investigating the feasibility of using Camellia oleifera Abel shell (COAS), an agriculture product in middle-west region in China, for the adsorption of methylene blue (MB), a cationic dye. Batch adsorption experiments were carried out to evaluate the effects of contact time, pH, adsorbent dosage, temperature and initial concentration on the adsorption of MB. Adsorption equilibrium studies showed that MB adsorption followed Langmuir model with a maximum adsorption capacity of 454.54 mg/g. The results demonstrated that the COAS is a promising adsorbent in the removal of MB from aqueous solutions.     

Removal of methylene blue from aqueous solution using wine-processing waste sludge

Dye wastewaters usually contain toxins and high chroma, making them difficult to treat with biological methods. The adsorption process plays an important role in removing dyes from wastewaters. This study aimed to explore the methylene blue (MB) adsorption mechanism by wine-processing waste sludge (WPWS). The WPWS contains a high cation-exchange capacity (64.2 cmol(c) kg(-1)) and organic matter (52.8%). The parameters affecting MB adsorption included pH, initial concentration of MB, reaction temperature, particle size and dosage of WPWS. The WPWS adsorption isotherms of MB were only well described by Langmuir adsorption isotherm. The maximum adsorption capacity (Q(m)) of MB was 285.7 mg g(-1) at 25 °C. The activation energy determined by Arrhenius equation is 29.995 kJ mol(-1). Under steady-state reaction conditions, the Gibb free energy (ΔG°) ranged from -24.607 to -27.092 kJ mol(-1) and ΔH° was -8.926 kJ mol(-1), indicating that lower reaction temperature would favor MB adsorption. Therefore, MB adsorption by WPWS was a spontaneous, exothermic and physisorption reaction.     

TiO2/石墨烯复合光催化剂的制备及其吸附与光催化降解性能

近年来,利用石墨烯独特的电学性质及高比表面积对一些材料进行修饰,制备性能更好的复合新材料成为材料学研究热点.本研究利用氧化还原法制备石墨烯,并进一步采用水热法制备TiO2/石墨烯(GN)纳米复合光催化剂.采用TEM,XRD,BET,UV-Vis DRS等对所制备的纳米复合材料进行表征.实验研究表明:随着石墨烯含量的增加,制备的复合材料光响应区域扩大,比表面积增加.研究证明TiO2/石墨烯对亚甲基蓝(MB)有更好的吸附及光催化降解效果.经计算,在室温下,pH =8时,P25-10％ GN对MB的饱和吸附量为50 mg/g.     

Dewatered alum sludge: a potential adsorbent for phosphorus removal.

Alum sludge refers to the by-product from the processing of drinking water in water treatment works. In this study, groups of batch experiments were designed to identify the characteristics of dewatered alum sludge for phosphorus adsorption. Air-dried alum sludge (moisture content 10.2%), which was collected from a water treatment works in Dublin, was subjected to artificial P-rich wastewater adsorption tests using KH2PO4 as a model P source. Adsorption behaviours were investigated as a function of amount and particle size of alum sludge, pH of solution and adsorption time. The results have shown that pH plays a major role not only in the adsorption process but also in the adsorption capacity. With regard to adsorption capacity, this study reveals the Langmuir adsorption isotherm being the best fit with experimental data (R2 = 0.98-0.99). The maximum adsorption capacities range from 0.7 to 3.5 mg-P/g when the pH of the synthetic P solution was varied from 9.0 to 4.3, accordingly. The outcome of this study indicated that alum sludge is suitable for use as an adsorbent for removal of phosphate from wastewater.     

Separation of oil-in-water emulsions by microbubble treatment and the effect of adding coagulant or cationic surfactant on removal efficiency

This study examined the efficiencies of microbubble (MB) treatment, MB treatment with polyaluminium chloride (PAC) as a coagulant, and MB treatment with cetyltrimethylammonium chloride (CTAC) as a cationic surfactant in the separation of emulsified oil (EO) by modified column flotation. Batch mode experiments were conducted by synthesizing emulsified palm oil (d<20 μm), and the chemical oxygen demand (COD) of the influent and effluent was measured to evaluate the treatment performance. MB treatment with PAC and MB treatment with CTAC were found to be more efficient in EO removal than the MB treatment alone. At an EO concentration of ～1,000 mg L(-1) (pH 7) and under identical treatment conditions (MB generation time: 2.5 min, flotation time: 30 min), MB treatment with PAC (50 mg L(-1)) and that with CTAC (0.5 mg L(-1)) showed equally high EO removal efficiencies of 92 and 89%, respectively. This result is of significant relevance to studies focusing on the development of economical and high-efficiency flotation systems. Furthermore, the effect of pH was investigated by varying the sample pH from 3 to 8, which showed that the EO separation efficiency of MB alone increased drastically from slightly alkaline to acidic condition.     

煤质活性炭对Cr(Ⅵ)和As(Ⅲ)的吸附及其影响因素

以煤质活性炭(CAC)为吸附剂,吸附水溶液中Cr(Ⅵ)和As(Ⅲ)。研究了pH值、温度、吸附时间和活性炭投加量等因素对活性炭去除Cr(Ⅵ)和As(Ⅲ)效果的影响。结果表明,Cr(Ⅵ)和As(Ⅲ)最佳吸附的pH值分别为2和5,且pH值对吸附率的影响较大。Cr(Ⅵ)的吸附受温度影响较大,当温度从20℃增加到40℃,吸附率由70%提高到了95%;As(Ⅲ)的吸附随温度的升高先增加后减少,其最佳吸附温度为30℃。Langmuir吸附等温式能够很好地拟合Cr(Ⅵ)和As(Ⅲ)的实验数据,而Pseudo second order模型则较好描述了Cr(Ⅵ)和As(Ⅲ)的吸附动力学。Cr(Ⅵ)和As(Ⅲ)吸附的热力学研究表明,该吸附是一个自发进行的自然吸热过程。     

Adsorption characteristics of methylene blue onto agricultural wastes lotus leaf in bath and column modes

The adsorption potential of lotus leaf to remove methylene blue (MB) from aqueous solution was investigated in batch and fixed-bed column experiments. Langmuir, Freundlich, Temkin and Koble-Corrigan isotherm models were employed to discuss the adsorption behavior. The results of analysis indicated that the equilibrium data were perfectly represented by Temkin isotherm and the Langmuir saturation adsorption capacity of lotus leaf was found to be 239.6 mg g(-1) at 303 K. In fixed-bed column experiments, the effects of flow rate, influent concentration and bed height on the breakthrough characteristics of adsorption were discussed. The Thomas and the bed-depth/service time (BDST) models were applied to the column experimental data to determine the characteristic parameters of the column adsorption. The two models were found to be suitable to describe the dynamic behavior of MB adsorbed onto the lotus leaf powder column.     

Removal of methylene blue from water by gamma-MnO2

Methylene blue (MB) is a cationic dyestuff, which is particularly resistant to biodegradation. The molecular sieved gamma-MnO2 was used as an adsorbent/oxidant to remove the MB at room temperature and in visible light. The removal efficiency was mainly evaluated by X-ray diffractometer (XRD), UV-Vis spectrometer (UV-Vis), total organic carbon (TOC). The results revealed that the mechanisms of MB removal by gamma-MnO2 are significantly influenced by the pH. In acidic conditions, hypsochromic effects (i.e. blue shifts of UV-Vis spectra) resulting from N-demethylation of the dimethylamino group in MB may occur concomitantly with oxidative degradation by gamma-MnO2. However, the TOC in solution after gamma-MnO2 treatment in acidic conditions did not show a dramatic decrease. At near neutral pH conditions, there was almost no UV-Vis absorption for the MB solution, however, only 50% TOC removal was observed. It indicated that MB was not only adsorbed onto gamma-MnO2 but also partially oxidatively degraded to other organic compounds which were colourless for UV-Vis.     

Removal of C.I. Reactive Red 2 from aqueous solutions by chitin: an insight into kinetics, equilibrium, and thermodynamics

In this study, C.I. Reactive Red 2 (RR2) was removed from aqueous solutions by chitin. Exactly how the RR2 concentration, chitin dosage, pH, and temperature affected adsorption of RR2 by chitin was then determined. After reaction for 120 min, the amount of 10 and 20 mg/L RR2 absorbed onto chitin was 5.7 and 7.5 mg/g, respectively. The adsorption percentage increased from 56 to 94% when the chitin dosage was increased from 1.5 to 2.5 g/L. Experimental results indicated that the pseudo-second-order model best represents adsorption kinetics. Adsorption of RR2 increased as the temperature increased; however, it decreased with an increased pH. Experimental results further demonstrated that the Freundlich model is superior to the Langmuir model in fitting experimental isotherms. The ΔH° and ΔS° were 16.34 kJ/mol and 152.10 J/mol K, respectively. ΔH° suggested that adsorption of RR2 onto chitin was via physisorption.     

Poly(acrylic acid) modifying bentonite with in-situ polymerization for removing lead ions

In this paper, a new kind of poly(acrylic acid) modified clay adsorbent, the poly(acrylic acid)/bentonite composite (PAA/HB) was prepared by in-situ polymerization, and utilized to remove lead(II) ions from solutions. The maximum adsorption of adsorbent is at pH 5 for metal ions, whereas the adsorption starts at pH 2. The effects of contact time (5-60 min), initial concentration of metal ions (200-1,000 mg/L) and adsorbent dosage (0.04-0.12 g/100 mL) have been reported in this article. The experimental data were investigated by means of kinetic and equilibrium adsorption isotherms. The kinetic data were analyzed by the pseudo-first-order and pseudo-second-order equation. The experimental data fitted the pseudo-second-order kinetic model very well. Langmuir and Freundlich isotherms were tried for the system to better understand the adsorption isotherm process. The maximal adsorption capacity of the lead(II) ions on the PAA/HB, as calculated from the Langmuir model, was 769.2 mg/g. The results in this study indicated that PAA/HB was an attractive candidate for removing lead(II) (99%).     

铝污泥吸附水中磷的影响因素及响应面法优化

为提高铝污泥的利用效率,将其更好地应用于富营养化水体的修复之中,以给水厂脱水铝污泥为吸附材料对水中的磷进行吸附,考察铝污泥投加量、铝污泥颗粒粒径、体系pH、水样磷浓度对吸附效果的影响。拟合了等温吸附方程,并借助响应面分析中的BBD(Box-Behnken Design)模型确定吸附时间、pH和铝污泥投加量这3种因素对吸附反应影响的显著性及交互作用的强弱,同时利用此模型对实验条件进行优化。结果表明:①上述4种因素均对吸附过程有所影响,Langmuir等温吸附方程拟合效果较好,铝污泥对磷的理论饱和吸附量为1.487 mg/g(温度298 K)。②铝污泥投加量对吸附的影响最为显著,pH和反应时间产生的交互作用最强。③当水体中磷浓度为10 mg/L时,其最佳工艺条件为铝污泥投加量12 g/L、pH=4.5及反应时间48 h,最大去除率为92.38%。     

Removal of copper(II) from aqueous solution using chemically modified fruit peels as efficient low-cost biosorbents

Fruit peels, which are common agricultural byproducts, have been extensively used as abandoned or low-cost biosorbents to remove heavy metals. In this study, dragon fruit peel (DFP), rambutan peel (RP), and passion fruit peel (PFP) were used to remove Cu(II) ions from an aqueous solution. Concentrations of the adsorbed metal ions were determined using the atomic absorption spectroscopic method. Adsorption experiments were performed with different adsorbent dosages, pH values, contact times, and initial copper concentrations. The optimum set of conditions for biosorption of Cu(II) ions was found to be an adsorbent dosage of 0.25 g, a contact time of 180 min, an initial concentration of 100 mg/L, a pH value of 4 for RP and PFP, and a pH value of 5 for DFP. The adsorption conformed with the pseudo-second-order kinetic model. The adsorption data were consistent with the Langmuir and Freundlich isotherm models, but the best fit was with the Langmuir model. The Langmuir monolayer adsorption capacity values of DFP, RP, and PFP were calculated to be 92.593, 192.308, and 121.951 mg/g, respectively. RP showed a higher adsorption capacity of Cu(II) ions than PFP and DFP for all parameters. The results indicate that these biosorbents might be used to effectively adsorb Cu(II) ions from wastewater treatment plants.     

Sorption behavior of florisil for the removal of antimony ions from aqueous solutions

Florisil was employed for the sorption of antimony ions from aqueous solutions. A detailed study of the process was performed by varying the sorption time, pH, and temperature. The sorption was found to be fast, equilibrium was reached within 15 min. Moreover, a maximum sorption has been achieved from solution when the pH ranges between 1-10. From kinetic experiments it follows that the process correlate with the second-order kinetic model. The overall rate process appears to be influenced by both boundary layer diffusion and intra-particle diffusion. The Langmuir and Dubinin-Radushkevich (D-R) type sorption isotherms can be applied to fit and interpret the sorption data. The mean energy of adsorption (9.73 kJ mol(-1)) was calculated from the Dubinin-Radushkevich (D-R) adsorption isotherm at room temperature. Furthermore, the thermodynamic parameters for the sorption were also determined, and the deltaH0 and deltaG0 values indicate a spontaneous endothermic behavior.     

Equilibrium, kinetic and thermodynamic studies of mercury adsorption on almond shell

The application of almond shell as a low cost natural adsorbent to remove Hg(2+) from aqueous solution was investigated. Batch experiments were carried out to evaluate the adsorption capacity of the material. The chemical and physical parameters such as pH, sorbent amount, initial ion concentration, and contact time were optimized for the maximum uptake of mercury onto the solid surface. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models, and the experimental data were found to fit the Langmuir model rather than the Freundlich. The maximum adsorption capacity obtained from the Langmuir isotherm was 135.13 mg/g. A kinetic study was carried out with pseudo-first-order and pseudo-second-order reaction equations and it was found that the Hg(2+) uptake process followed the pseudo-second-order rate expression. The thermodynamic values, ΔG(0), ΔH(0) and ΔS(0), indicated that adsorption was an endothermic and spontaneous process. The potential of this material for mercury elimination was demonstrated by efficient Hg(2+) removal from a synthetic effluent.     

Adsorptive performance of penta-bismuth hepta-oxide nitrate, Bi?O?NO?, for removal of methyl orange dye

The adsorption of methyl orange dye from aqueous solution onto penta-bismuth hepta-oxide nitrate, Bi(5)O(7)NO(3), synthesized by precipitation method, was studied in a batch adsorption system. The effects of operation parameters such as adsorbent dose, initial dye concentration, pH and temperature were investigated. The adsorption equilibrium and mechanism of adsorption was evaluated by Langmuir and Freundlich isotherm and different kinetic models, respectively. The results indicate that adsorption is highly dependent on all operation parameters. At optimum conditions, the adsorption capacity was found to be 18.9 mg/g. The adsorption data fits well with the Langmuir isotherm model indicating monolayer coverage of adsorbate molecules on the surface of Bi(5)O(7)NO(3). The kinetic studies show that the adsorption process is a second-order kinetic reaction. Although intra-particle diffusion limits the rate of adsorption, the multi-linearity plot of intra-particle model shows the importance of both film and intra-particle diffusion as the rate-limiting steps of the dye removal. Thermodynamic parameters show that the adsorption process is endothermic, spontaneous and favourable at high temperature.     

Removal of Cu(II) ions from aqueous solutions using N-carboxymethyl chitosan

N-carboxymethyl chitosan (NCMC) was synthesized by reacting chitosan with chloroacetic acid in water under triethylamine (Et(3)N) as catalyst. The chemical structures of NCMC were characterized by Fourier transform infrared (FT-IR) and hydrogen-1 nuclear magnetic resonance ((1)H-NMR) spectroscopy and confirmed that carboxymethylation occurred on the amino groups. Samples of NCMC were used for removal of Cu(II) from aqueous solution. The effects of degree of substitution of NCMC, initial pH value and adsorption kinetics on the adsorption were studied. Adsorption experiments showed that NCMC has a high adsorption speed and high adsorption capacity for remove Cu(II) from aqueous solution. The adsorption kinetics data were best fitted with the pseudo-second-order model. The experimental equilibrium data of Cu(II) on the NCMC were both fitted to the Langmuir model and Freundlich model, which revealed that the maximum capacity for monolayer saturation was 147.93 mg/g.     

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

The adsorption of Cu(2+), Zn(2+), Cd(2+) and Pb(2+) ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were 0.319, 0.311, 0.18 and 0.096 mmol g(-1), respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.     

铅锌矿尾矿吸附水溶液中碱性品绿的研究

以铅锌矿尾矿(TLZO)作为吸附剂,研究不同条件下吸附水溶液中碱性品绿(BG)的特性,并对其吸附机理进行探讨。结果表明:pH值对BG的吸附有显著影响,最佳pH值为7.0;TLZO吸附BG是一个快速的过程,40min即达到平衡。随着初始浓度的增加,吸附量越大,达到平衡所需的时间越长;动力学数据较好地符合拟二级动力学方程。初始阶段外扩散过程对TLZO吸附BG的速率影响较大;在内扩散过程中,同一初始浓度下速率常数Kp,2>Kp,3,同一扩散阶段的速率随着初始浓度的升高而升高。TLZO对BG的等温吸附行为较好地符合Freundlich吸附等温模型。     

微生物吸附低温水体中Cr(Ⅵ)、Cd(Ⅱ)离子研究

利用从活性污泥中分离、纯化、筛选得到的霉菌,进行吸附水体中Cr(Ⅵ)、Cd(Ⅱ)离子研究。结果表明:在Cr(Ⅵ)、Cd(Ⅱ)质量浓度分别为300mg/L时,菌种生长良好。吸附水体中Cr(Ⅵ)、Cd(Ⅱ)的最佳条件:pH值5.0,时间1h,温度10℃。吸附规律符合Langmuir等温吸附模型,由回归方程得到Cr(Ⅵ)的表观最大吸附量为14mg/g;Cd(Ⅱ)的表观最大吸附量为52mg/g。对菌种吸附低温水体中两种重金属离子时pH值变化影响及其吸附动力学进行了研究。证明该菌可以有效地去除低温水体中Cr(Ⅵ)、Cd(Ⅱ)离子。     

Arsenic removal by iron and manganese coated sand.

In this study, as a promising technique for the treatment of both As(III) and As(V) at the same time in a single reactor, a column reactor containing both manganese-coated sand (MCS) and iron-coated sand (ICS), at different configuration of MCS and ICS, was used to treat wastewater contaminated with As(III). Prior to column experiments, batch experiments for the adsorption of As(V) by ICS were performed with variation of solution pH, ionic strength and types of background ions to investigate the effect of these parameters on the As(V) adsorption behaviour. As(V) adsorption onto ICS was quite similar with the variation of ionic strength by using NaNO3 as a background ion as well as in the presence of different types of background ions except phosphate. The adsorption curves shifted to the lower pH region with the increase of the initial arsenic concentration due to the finite number of adsorption sites on the ICS. For model prediction on the adsorption of As(V) onto ICS, the MINEQL program employing an inner-sphere complexation and a diffuse layer model was used. Model predictions generally agreed well with experimental results. From the column test, column system packed with equal ratio of MCS and ICS was identified as the best system due to a promising oxidation efficiency of As(III) to As(V) by MCS and adsorption of As(V) by both MCS and ICS.