基于共享秘密的伪随机散列函数RFID双向认证协议

针对资源受限的RFID标签,结合伪随机数和共享秘密机制,该文提出一种基于散列函数的轻量级双向认证协议,实现了后端数据库、阅读器和标签之间的双向认证。详细分析了双向认证协议的抗攻击性能和效率性能,并基于BAN逻辑分析方法对协议模型进行了形式化证明。理论分析表明,该文提出的认证协议能够实现预期安全目标,抗攻击性能好,认证执行效率高且标签开销小,适用于大数量的RFID应用。     

一种具有阅读器匿名功能的射频识别认证协议

在射频识别(RFID)的应用中,安全问题特别是用户隐私问题正日益凸显。因此,(用户)标签信息的隐私保护的需求越来越迫切。在RFID系统中,标签的隐私保护不仅是对外部攻击者,也应该包括阅读器。而现有许多文献提出的认证协议的安全仅针对外部攻击者,甚至在外部攻击者的不同攻击方法下也并不能完全保证安全。该文提出两个标签对阅读器匿名的认证协议:列表式RFID认证协议和密钥更新式RFID认证协议。这两个协议保证了阅读器对标签认证时,标签的信息不仅对外部攻击者是安全的而且对阅读器也保持匿名和不可追踪。相较于Armknecht等人提出的对阅读器匿名和不可追踪的认证协议,该文所提的协议不再需要增加第三方帮助来完成认证。并且密钥更新式RFID匿名认证协议还保证了撤销后的标签对阅读器也是匿名性和不可追踪的。     

轻量级RFID系统的认证协议研究

由于标签强大的追踪能力,无线射频识别(RFID,Radio Frequency Identification)技术越来越多地被应用到与安全相关的各个领域,从而对安全功能的要求也随之提高。针对轻量级RFID标签在使用中的安全问题,对现有的认证协议潜在的危险进行了深入的分析,在此基础上提出了一种基于流密码的认证协议。在此安全协议中,标签和阅读器之间进行多次的双向认证,可以确保通信双方的合法性;并充分考虑了在实际应用中,标签的低成本要求。     

一种RFID系统的Tag-Reader双向安全认证协议

为了保证RFID系统的信息安全,本文在分析现有RFID认证协议的基础上,提出一种基于Grain-Mac流密码加密算法的双向安全认证协议,采用流密码和密钥动态更新的方法实现了标签与阅读器的双向认证。仿真结果表明,该协议成本低、效率高、安全性好,且能够有效抵抗拒绝服务攻击,达到了预期的效果。     

轻型的RFID安全认证协议LAP

RFID标签存在着处理能力弱、存储空间小和电源供给有限等局限性,传统的公钥算法或散列函数等复杂运算不能满足实际应用的需求。针对现有轻量级RFID认证协议的不足,设计了基于广义逆矩阵的RFID安全认证协议LAP。该协议采用了硬件复杂度较低的CRC校验及计算量较小的矩阵运算。通过安全隐私和性能分析,LAP协议适用于低成本、存储与计算受限的RFID标签。     

基于Edwards曲线的移动RFID安全认证协议

针对传统的RFID认证协议通常难以适应移动RFID系统的问题,提出了基于Edwards曲线的适用于移动RFID系统的安全认证协议,协议采用Edwards曲线提高了其防侧信道攻击的能力,并应用椭圆曲线离散对数问题实现安全认证。进一步采用可证明安全方法给出了标签和阅读器不可跟踪隐私的安全性证明,通过安全性分析指出协议能更有效抵抗已有各种攻击。与现有的结构类似RFID认证协议相比,该协议扩展性更好,安全性和性能优于其他方案。     

基于码分多址防碰撞的射频识别认证协议

该文针对射频识别(RFID)领域中的安全认证协议和多标签防碰撞算法两个研究热点,设计了一种基于码分多址防碰撞算法的RFID安全认证协议。协议支持密钥的动态更新并引入标志位机制选择备用密钥来抵御数据库同步攻击,同时结合码分多址技术,应用重传随机数进行扩频码的选择,实现一次重传解决多标签识别中因数据碰撞造成的标签不识别的问题。首先,描述协议的流程及防碰撞原理;其次,应用SVO逻辑对认证协议的正确性进行证明;最后,对应用该认证协议的系统吞吐效率进行数值分析,分析表明其吞吐效率高于传统防碰撞算法。     

基于口令认证的RFID系统安全协议及其BAN逻辑分析

本文提出一种新的基于口令认证的RFID系统安全协议.该方法充分利用RFID低等级标签提供的有限资源:访问口令(PW)、标签的标识码(ID)和伪随机函数等建立RFID系统读写器和标签双向认证的安全协议,对该协议抵抗各种攻击的安全性进行理论分析并对该协议的认证功能进行BAN逻辑的形式化分析.结果表明该协议能够有效抵御在线和离线字典攻击、伪装攻击、重放攻击以及流量分析和跟踪攻击,因而解决了RFID系统的安全问题.     

Research on Cryptographic Protocols for RFID

无线射频识别(RFID)技术的广泛应用给人们的生活带来了极大方便,但RFID系统中的安全隐患也应得到重视.析了几种常用的RFID安全认证协议,针对密钥矩阵安全认证协议中密值更新出现不同步的问题提出了一种自同步的安全协议.当标签和数据库之间的密值更新出现不同步时,该协议能够自动使标签和数据库重新同步,有效解决标签和数据库密值更新不同步的问题.     

基于单向伪随机函数的移动RFID系统认证协议

针对移动RFID系统认证中可能出现的成本、效率、安全问题,设计了一种基于单向伪随机函数的移动RFID认证协议.协议在满足Gen-2标准的前提下,综合采用位替换运算、异或运算和单向伪随机函数加密通信信息;协议充分利用标签、读写器、后端数据库三方共享密钥和三方通信信息,对信息进行加密传输和加密认证,降低系统成本;通过实现完整三方认证与密钥更新工作,避免协议遭受假冒、去同步化等攻击行为.最后,给出协议GNY理论逻辑证明以及安全、性能分析,表明新协议的可行性与安全性.     

基于动态共享密钥的移动RFID双向认证协议

针对移动无线射频识别认证协议面临的身份认证和隐私保护、动态密钥安全更新和去同步化攻击问题,提出一种可动态更新共享密钥的移动RFID双向认证协议.协议基于Hash密码机制,利用随机数同时进行密钥安全更新和身份认证,并采用对分表存储的当前和历史共享密钥进行动态添加和删除的方法,保留最后一次合法认证后的一致共享密钥.安全性能分析与效率分析表明,该协议能够实现动态密钥安全更新和身份认证、能够在遭受去同步化攻击后保证密钥同步,且具有较强的计算和存储性能.通过和同类RFID认证协议比较,协议弥补了同类RFID协议存在的不足,适用于被动式标签数量庞大的RFID系统.     

基于Hash函数的随机RFID认证协议

目前,射频识别技术RFID（Radio Frequency Identification）已经越来越多地应用于社会各个领域。文中分析了已有的基于Hash函数的RFID认证协议的不足,提出了一种基于Hash函数的随机RFID认证协议,并对其安全性进行了分析,本协议安全、高效,特别适用于大规模RFID系统。     

一种轻量级RFID相互认证协议

针对射频识别系统中存在的用户安全、隐私等问题,文章提出一种轻量级密码学的安全认证协议。该协议利用Hash函数的单向性和递增的时间戳,较好地解决了RFID的安全隐私问题。通过对比说明该协议具有很好的安全性和高效性。     

一种RFID隐私保护双向认证协议

作为一种非接触式自动识别技术,RFID在带来成本节约和效率提高的同时,也带来了安全和隐私的风险。为保证安全性和隐私性,必须对阅读器和标签之间的通信提供认证和保护,对现有的RFID安全性和隐私性解决方案进行了简要分析,之后应用零知识思想,提出了一种基于单向Hash函数的双向RFID认证协议,并分析了其安全性和抗攻击性。     

An Improved RFID Authentication Protocol Based on Group Anonymous Model

Aiming at the security and privacy, and authentication efficiency shortages of existing RFID authentication protocol, an improved scheme is proposed based on Alavi et al.’s protocol. Firstly, in order to resist against replay attack, we add the timestamp generator to the reader side and use hash function to encrypt the reader identification, the random number and timestamp generated by the reader; meanwhile, to solve the data integrity problem in the original scheme, the reader matches the decrypted data with the server side message to ensure that it can detect if the data is tampered with by the attacker. Finally, the improved group anonymous authentication model is used to improve the back-end server’s authentication efficiency. Theoretical analysis and experimental results show that the improved protocol effectively solves the security problems and reduces the back-end server’s authentication time. In addition, this paper simulates the impact of group number on system privacy level and authentication efficiency through experiments. In practical applications, the group number can be adjusted appropriately according to different privacy and efficiency requirements, so the privacy and authentication efficiency of the system will be well-balanced.     

Server‐less RFID authentication and searching protocol with enhanced security

This paper focuses on two interesting radio‐frequency identification (RFID) cryptographic protocols: the server‐less RFID authentication protocol that allows readers to authenticate tags without the help of any online backend servers, and the RFID searching protocol in which the verifier explicitly specifies the target tag to be searched and authenticated. These two kinds of RFID protocols play important roles in many RFID applications; however, the existing protocols either had security weaknesses or exhibited poor efficiency. This paper shows the weaknesses, and then proposes our server‐less RFID authentication protocol and RFID searching protocol. The proposed protocols greatly enhance the security using one more hashing. Copyright © 2011 John Wiley & Sons, Ltd.     

Keyless Security in Wireless Networks

Security and privacy issues in RFID technology gain tremendous popularity recently. However, existing work on RFID authentication problems always make assumptions such as (1) hash function can be fully employed in designing RFID protocols; (2) channels between readers and server are always secure. The first assumption is not suitable for EPC Class-1 Gen-2 tags, which has been challenged in many research work, while the second one cannot be directly adopted in mobile RFID applications where wireless channels between readers and server are always insecure. To solve these problems, in this paper, we propose a novel ultralightweight and privacy-preserving authentication protocol for mobile RFID systems. We only use bitwise XOR, and several special constructed pseudo-random number generators to achieve our aims in the insecure mobile RFID environment. We use GNY logic to prove the security correctness of our proposed protocol. The security and privacy analysis show that our protocol can provide several privacy properties and avoid suffering from a number of attacks, including tag anonymity, tag location privacy, reader privacy, forward secrecy, and mutual authentication, replay attack, desynchronization attack etc. We implement our protocol and compare several parameters with existing work, the evaluation results indicate us that our protocol significantly improves the system performance.     

一种基于Hash函数的RFID安全认证方法

近年来,射频识别(RFID)技术得到越来越多的应用,随之而来的是各种RFID安全问题。对现有的基于Hash函数的RFID认证协议进行分析,针对现有技术存在的不足,提出了一种基于Hash函数的低成本的RFID双向安全认证方法,该方法只需要进行一次Hash函数计算,且加入了标签ID动态更新机制,通过在后台数据库中存储旧的标签ID解决同步问题,与现有技术相比具有一定的优越性。     

ITPMAP: An Improved Three-Pass Mutual Authentication Protocol for Secure RFID Systems

Radio frequency identification (RFID) is a wireless technology used in various applications to minimize the complexity of everyday life. However, it opens a large number of security and privacy issues that require to be addressed before its successful deployment. Many RFID authentication protocols are proposed in recent years to address security and privacy issues, and most of them are based on lightweight cryptographic techniques such as pseudo-random number generators (PRNGs), or bitwise logical operations. However, the existing RFID authentication protocols suffer from security weaknesses, and cannot solve most of the security and privacy problems. A new solution is necessary to address security and privacy issues. In this paper, an improved three-pass mutual authentication protocol (ITPMAP) for low-cost RFID tags is proposed to offer an adequate security level for RFID systems. The proposed ITPMAP protocol uses one PRNG on the tag side and heavy-weighted cryptographic techniques (i.e., digital signature and password-based encryption schemes) on the back-end server side instead of lightweight cryptographic techniques to address the security and privacy issues. The ITPMAP protocol is secure against various attacks such as cloning, spoofing, replay, and desynchronization attacks. Furthermore, as a proof of concept, the ITPMAP protocol is adopted to propose the design of three real-life RFID systems; namely: Signing and Verification of Graduation Certificate System, issuing and verification of e-ticketing system, and charging and discharging of prepaid card system. The Unified Modeling Language is used to demonstrate the design of the proposed ITPMAP protocol and systems. Java language is used for the implementation of the proposed systems. In addition, the “Mifare Classic” tags and readers are used as RFID apparatuses for the proposed systems.