| 电机-飞轮-油泵液压动力单元实验研究 |
| |
| 引用本文： | 罗琬先,陈柏金,颜笑鹏.电机-飞轮-油泵液压动力单元实验研究[J].中国机械工程,2018,29(11):1336. |
| |
| 作者姓名： | 罗琬先 陈柏金 颜笑鹏 |
| |
| 作者单位： | 华中科技大学材料成形与模具技术国家重点实验室，武汉，430074 |
| |
| 基金项目： | 湖北省重大科技创业基金资助项目（2013AEA003） |
| |
| 摘 要： | 针对锻造液压机装机功率大、能量损失严重的问题，设计出一种节能型液压动力单元，通过变频器控制异步电机带动飞轮驱动油泵。控制器控制飞轮能量的储存与释放，低负载阶段时，电机带动飞轮储存能量；高负载做功时，电机与飞轮同时释放能量。对动力单元进行了理论与实验研究，得到不同转速下，成形能量、电机功率、电机转速与时间的关系。实验结果表明：较普通液压动力系统，该动力系统装机功率至少降低30%，且对液压机的动作影响不大。
|
| 关 键 词： | 节能 液压机 飞轮 变频调速 |
Experimental Research on Hydraulic Power Units of Motor-Flywheel-Pumps |
| |
| LUO Wanxian,CHEN Baijin,YAN Xiaopeng.Experimental Research on Hydraulic Power Units of Motor-Flywheel-Pumps[J].China Mechanical Engineering,2018,29(11):1336. |
| |
| Authors: | LUO Wanxian CHEN Baijin YAN Xiaopeng |
| |
| Affiliation: | State Key laboratory of Materials Processing and Die & Mould Technology， Huazhong University of Science and Technology， Wuhan， 430074 |
| |
| Abstract: | Concerning the high installed powers of forging hydraulic presses and large amount of powers wasted by the system， an energy-saving hydraulic unit was proposed.The pump was actuated by a flywheel driven by a three-phase induction motor which was controlled by frequency conversion， and the controller regulated the flywheel to store and release energies.Flywheel stored energy in light load stages， and released energy in full load phases.Theoretical and experimental researches were carried out， and the relationships of forming energies， motor powers and motor speeds in different work speeds were obtained.The experimental results show that the power unit may decrease 30% installed power at least， and hydraulic press works stably. |
| |
| Keywords: | save energy hydraulic press flywheel variable frequency speed control |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
