| 化学成分对高强Al-Mg-Si合金组织和性能的影响 |
| |
| 引用本文： | 陈保安,张静媛,祝志祥,韩钰,潘学东,张磊,陈素红.化学成分对高强Al-Mg-Si合金组织和性能的影响[J].金属热处理,2022,47(4):30-38. |
| |
| 作者姓名： | 陈保安 张静媛 祝志祥 韩钰 潘学东 张磊 陈素红 |
| |
| 作者单位： | 1.全球能源互联网研究院有限公司 先进输电技术国家重点实验室, 北京 102209;2.全球能源互联网研究院有限公司 电工新材料研究所, 北京 102209;3.国网山东省电力公司电力科学研究院, 山东 济南 250003 |
| |
| 基金项目： | 国家电网有限公司总部科技项目(5500-201958415A-0-0-00)； |
| |
| 摘 要： | 通过电子拉伸试验机、扫描电镜、透射电镜等研究了5种不同合金成分对高强Al-Mg-Si合金组织和性能的影响。结果发现,5种 Al-Mg-Si合金微观组织、力学性能以及导电性能都强烈依赖于合金中Mg和Si含量。随着Mg、Si含量的增加,合金的抗拉强度增加,同时导电率呈现下降的趋势。Al-0.7Mg-0.5Si和Al-0.6Mg-0.6Si相比,虽然两种合金的Mg、Si原子总量相当,但是由于Mg/Si比不同,导致二者微观组织明显不同,性能存在明显的差异。Ce微合金化使Al-0.7Mg-0.6Si-0.2Ce合金的力学性能和电学性能获得良好的匹配,175 ℃时效4 h的抗拉强度达到325 MPa,同时导电率达到56.2%IACS。
|
| 关 键 词： | Al-Mg-Si合金 微观组织 力学性能 导电率 |
| 收稿时间： | 2021-12-18 |
Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy |
| |
| Chen Baoan,Zhang Jingyuan,Zhu Zhixiang,Han Yu,Pan Xuedong,Zhang Lei,Chen Suhong.Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy[J].Heat Treatment of Metals,2022,47(4):30-38. |
| |
| Authors: | Chen Baoan Zhang Jingyuan Zhu Zhixiang Han Yu Pan Xuedong Zhang Lei Chen Suhong |
| |
| Affiliation: | 1. State Key Laboratory of Advanced Power Transmission Technology, Global Energy Interconnection Research Institute Co., Ltd., Beijing 102209, China;2. Department of Electrical Engineering New Materials, Global Energy Interconnection Research Institute Co., Ltd., Beijing 102209, China;3. Electric Power Research Institute of State Grid Shandong Electric Power Company, Ji'nan Shandong 250003, China |
| |
| Abstract: | Effect of alloy composition on microstructure and properties of five kinds of Al-Mg-Si alloys was investigated by using universal tensile testing machine, SEM, TEM, etc. The results show that the microstructure, mechanical properties and conductivity of the five alloys are strongly depended on the Mg and Si contents. With increase of Mg and Si contents, the tensile strength of the alloy increases, whereas the conductivity tends to decrease. Although the total atoms of Mg and Si are equal for the Al-0.7Mg-0.5Si and Al-0.6Mg-0.6Si alloys, the different ratios of Mg to Si between the two alloys lead to distinct microstructure, so causing obvious difference in their performance. The Ce-microalloyed Al-0.7Mg-0.6Si-0.2Ce alloy aged at 175 ℃ for 4 h exhibits a good combination between mechanical properties and electrical properties, the tensile strength is up to 325 MPa, and the electrical conductivity is 56.2%IACS. |
| |
| Keywords: | Al-Mg-Si alloy microstructure mechanical properties electrical conductivity |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
