| 中间退火工艺对6016铝合金组织与性能的影响 |
| |
| 引用本文： | 丁轩,甘玉荣,张春菊,王立强,杨明球,李辉.中间退火工艺对6016铝合金组织与性能的影响[J].金属热处理,2021,46(8):174-179. |
| |
| 作者姓名： | 丁轩 甘玉荣 张春菊 王立强 杨明球 李辉 |
| |
| 作者单位： | 1.烟台南山学院 工学院, 山东 烟台 265713;2.山东南山铝业股份有限公司 国家铝合金压力加工工程技术研究中心, 山东 烟台 265700;3.山东南山暖通新材料有限公司 技术中心, 山东 烟台 265700 |
| |
| 基金项目： | 山东省高等学校青创科技计划(2019KJA019) |
| |
| 摘 要： | 通过扫描电镜、透射电镜等手段研究了汽车外板用6016铝合金生产过程中微观结构的演变规律和中间退火工艺对综合性能的影响。结果表明,连续退火比箱式退火具备更强的晶粒细化作用;中间退火前冷轧压下量对结晶相破碎效果显著,结晶相尺寸从4.38 μm降至3.20 μm左右,降低了约27%;中间退火处理弱化了T4P态板材中的不均匀屈服延伸。箱式退火的慢升温速率和长时间中温保温导致Mg2Si相沿晶析出并粗化。
|
| 关 键 词： | 6016铝合金 汽车外板 箱式退火 连续退火 Mg2Si |
| 收稿时间： | 2021-04-06 |
Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy |
| |
| Ding Xuan,Gan Yurong,Zhang Chunju,Wang Liqiang,Yang Mingqiu,Li Hui.Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy[J].Heat Treatment of Metals,2021,46(8):174-179. |
| |
| Authors: | Ding Xuan Gan Yurong Zhang Chunju Wang Liqiang Yang Mingqiu Li Hui |
| |
| Affiliation: | 1. Institute of Engineering, Yantai Nanshan University, Yantai Shandong 265713, China;2. National Engineering Research Center for Plastic Working of Aluminum Alloys, Shandong Nanshan Aluminum Co., Ltd., Yantai Shandong 265700, China;3. Test Center, Shandong Nanshan Nuantong New Material Co., Ltd., Yantai Shandong 265700, China |
| |
| Abstract: | Microstructure evolution in production process and effect of intermediate annealing on comprehensive performance of the 6016 aluminum alloy for automobile body sheet were studied by using scanning electron microscope and transmission electron microscope. The results show that continuous annealing has stronger grain refinement effect than furnace annealing. The reduction amount of cold rolling before intermediate annealing has a remarkable effect on fragmentization of the crystalline phases, decreasing the size from 4.38 μm to ~3.2 μm, i.e., reduced by ~27%, and the intermediate annealing treatment can weaken uneven yield elongation of the T4P automobile body sheet. Whereas the slow heating rate of furnace annealing and long holding time at medium temperature lead to grain boundary precipitation and coarsening of Mg2Si. |
| |
| Keywords: | 6016 aluminum alloy automobile body sheet furnace annealing continuous annealing Mg2Si |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
