| 注塑成型长玻璃纤维/聚丙烯复合材料的冲击韧性 |
| |
| 引用本文： | 咸贵军,益小苏,胡永明,潘颐.注塑成型长玻璃纤维/聚丙烯复合材料的冲击韧性[J].复合材料学报,2001,18(2):36-40. |
| |
| 作者姓名： | 咸贵军 益小苏 胡永明 潘颐 |
| |
| 作者单位： | 1. 浙江大学高分子复合材料研究所,
2. 浙江大学高分子复合材料研究所,航空材料研究院 |
| |
| 摘 要： | 利用自行研制的连续纤维/热塑性树脂浸渍装置,制备了注塑成型用长玻璃纤维增强聚丙烯粒料。利用Charpy冲击试验,研究了界面相容剂(接枝马来酸酐聚丙烯)的用量、粒料长度等对注塑试样冲击韧性的影响。试验发现,随着接枝聚丙烯含量的增加,试样的冲击韧性显著提高。但当接枝聚丙烯含量达到一定程度时,冲击韧性反而下降。注塑试样的冲击韧性随长纤维粒料的长度增加和冲击试样模具的浇口尺寸变大而升高。对于平板材料,冲击试样所处的位置不同,其韧性也有较大的变化。试验还发现,退火处理可以有效地提高注塑试样的冲击韧性。
|
| 关 键 词： | 注塑成型 冲击韧性 长玻璃纤维增强聚丙烯 |
| 文章编号： | 1000-3851(2001)02-0036-05 |
| 收稿时间： | 2000-03-09 |
| 修稿时间： | 2000年3月9日 |
IMPACT TOUGHNESS OF LONG GLASS FIBER REINFORCED POLYPROPYLENE |
| |
| XIAN Gui-jun,YI Xiao-Su,HU Yong-ming,PAN Yi.IMPACT TOUGHNESS OF LONG GLASS FIBER REINFORCED POLYPROPYLENE[J].Acta Materiae Compositae Sinica,2001,18(2):36-40. |
| |
| Authors: | XIAN Gui-jun YI Xiao-Su HU Yong-ming PAN Yi |
| |
| Affiliation: | 1. Institute of Polymer Composites, Zhejiang University, Hangzhou 310027, China;
2. National Key Laboratory of Advanced Composites, Beijing institute of Aeronautical Materials, Beijing 100095, China |
| |
| Abstract: | Using an impregnation and pultrusion device developed at our laboratory, long glass fiber reinforced polypropylene pellets for injection molding were produced. Composites samples were molded with the pellets by a conventional injection machine. Factors affecting the impact toughness were studied by Charpy test. The impact toughness increased with the addition of grafted polypropylene at first, but it decreased slowly when the grafted polypropylene addition exceeded 5 %. Nevertheless, higher impact toughness was obtained with longer pellets and/or wider runner. As to molded planar samples, the impact toughness varied depending on the position where the sample was cut. Annealing was an effective method to improve the impact toughness. |
| |
| Keywords: | injection molding impact strength long glass fiber reinforced polypropylene |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
|
