首页 | 官方网站   微博 | 高级检索  
     

椭球约束下减小三维定位中的非视距误差
引用本文:庞丽莉,许其清,谢家烨.椭球约束下减小三维定位中的非视距误差[J].计算机工程与应用,2019,55(7):115-119.
作者姓名:庞丽莉  许其清  谢家烨
作者单位:南京工程学院 工业中心,南京,211167;南京工程学院 工业中心,南京 211167;东南大学 毫米波国家重点实验室,南京 210096
基金项目:博士启动基金;江苏省高等学校自然科学研究项目;东南大学毫米波国家重点实验室开放基金
摘    要:采用精度较高的TOA测距方法对位于三维表面的节点进行定位时,非视距传播现象会造成测距值出现较大的正向误差。针对非视距误差提出一种判别算法,对参与定位的锚节点进行筛选,剔除掉非视距误差较大的锚节点,再用残差加权算法进行最终的位置估计。与最小二乘法和残差加权法相比,能够有效地减小非视距误差的影响,具有更高的定位精度。

关 键 词:非视距  三维定位  最小二乘法  残差加权法

Reduction of NLOS Error in Three-Dimensional Positioning under Ellipsoid Constraint
PANG Lili,XU Qiqing,XIE Jiaye.Reduction of NLOS Error in Three-Dimensional Positioning under Ellipsoid Constraint[J].Computer Engineering and Applications,2019,55(7):115-119.
Authors:PANG Lili  XU Qiqing  XIE Jiaye
Affiliation:1.Industrial Center, Nanjing Institute of Technology, Nanjing 211167, China 2.State Key Laboratory of Millimeter Waves, Southeast University, Nanjing 210096, China
Abstract:TOA(Time of Arrival) ranging method is generally used for locating the nodes on 3D surface to obtain higher accuracy, while the Non-Line-of-Sight(NLOS) propagation phenomenon will cause larger positive error of TOA ranging value. A discriminant algorithm is proposed to identify the anchor nodes with larger NLOS error and screen out the anchor nodes to be used for node localization, and then the final location can be estimated with the residual weighting algorithm. Compared with the least square method and the Residual Weighting Algorithm(Rwgh), the proposed algorithm can effectively reduce the influence of NLOS error and has higher positioning accuracy.
Keywords:Non-Line-of-Sight(NLOS)  three dimensional localization  least square method  Residual Weighting Algorithm(Rwgh)  
本文献已被 万方数据 等数据库收录!
点击此处可从《计算机工程与应用》浏览原始摘要信息
点击此处可从《计算机工程与应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号