首页 | 官方网站   微博 | 高级检索  
     

多孔介质燃烧-换热器的二维数值研究
引用本文:史俊瑞,解茂昭,韩春福,李军,李刚.多孔介质燃烧-换热器的二维数值研究[J].化工学报,2009,60(5):1116-1120.
作者姓名:史俊瑞  解茂昭  韩春福  李军  李刚
作者单位:沈阳工程学院沈阳市循环流化床燃烧技术重点试验室; 大连理工大学能源与动力学院;大连大学建筑工程学院
基金项目:辽宁省教育厅科学研究计划项目(2008491);;辽宁省博士启动基金项目(20081073);;国家自然科学基金项目(50476073)~~
摘    要:通过二维数值模型研究了多孔介质燃烧-换热器。在宽广的工况范围内,研究多孔介质燃烧-换热器内的温度、速度分布和压力损失,研究主要工作参数过量空气系数和功率对换热管总的热效率的影响。结果表明,过量空气系数和功率对总的热效率有显著的影响,随二者的增大,总的热效率降低。实验验证了数值计算结果的有效性。

关 键 词:数值研究  多孔介质  燃烧-换热器  
收稿时间:2008-11-27
修稿时间:2009-2-5  

Two-dimensional numerical study of porous media combustion-heater
SHI Junrui,XIE Maozhao,HAN Chunfu,LI Jun,LI Gang.Two-dimensional numerical study of porous media combustion-heater[J].Journal of Chemical Industry and Engineering(China),2009,60(5):1116-1120.
Authors:SHI Junrui  XIE Maozhao  HAN Chunfu  LI Jun  LI Gang
Affiliation:1Shenyang Key Laboratory for Circulating Fluidized Bed Combustion Technology;Shenyang Institute of Engineering;Shenyang 110136;Liaoning;China;2School of Energy and Power Engineering;Dalian University of Technology;Dalian 116024;3School of Civil and Architecture Engineering;Dalian University;Dalian 116622;China
Abstract:The two-dimensional numerical investigations on the porous media combustion-heater were presented.Temperature distribution,velocity profiles,and pressure loss were investigated in a wide range of operation parameters.Attention was focused on the influence of the dominating parameters,i. e.,the excess air ratio and firing rate,on the thermal efficiency.The results showed that the excess air ratio and firing rate had significant influence on thermal efficiency,and the overall thermal efficiency decreased with...
Keywords:numerical study  porous media  combustion-heater
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号