首页 | 官方网站   微博 | 高级检索  
     

粉煤灰为基制备耐火材料的研究
引用本文:李健铎,马丽萍,刘红盼,王荣谋,崔晓婧.粉煤灰为基制备耐火材料的研究[J].硅酸盐通报,2017,36(5):1656-1660.
作者姓名:李健铎  马丽萍  刘红盼  王荣谋  崔晓婧
作者单位:昆明理工大学环境科学与工程学院,昆明,650500
摘    要:以粉煤灰为主要原材料,煤矸石和工业氧化铝为辅料,通过控制物料比例制备了不同Al2O3含量在不同烧结温度下的耐火材料.对所制备材料进行结构性能测试,并借助X射线衍射和扫描电镜对材料进行微观分析.实验结果表明:不同的烧结温度及氧化铝含量对耐火制品的致密性、力学性能、耐火度和晶型状态都有影响.制品在1350 ℃、Al2O3的含量为45%时,其性能指标为:体积密度2.47 g/cm3、常温耐压41 MPa、耐火度1450 ℃、晶型状态以莫来石相和刚玉相为主.该制品的力学性能和使用性能较好,可为进一步利用粉煤灰制备高附加值材料奠定基础.

关 键 词:粉煤灰  煤矸石  耐火材料  

Preparation of Refractory Material Based on Fly Ash
LI Jian-duo,MA Li-ping,LIU Hong-pan,WANG Rong-mou,CUI Xiao-jing.Preparation of Refractory Material Based on Fly Ash[J].Bulletin of the Chinese Ceramic Society,2017,36(5):1656-1660.
Authors:LI Jian-duo  MA Li-ping  LIU Hong-pan  WANG Rong-mou  CUI Xiao-jing
Abstract:Fly ash based refractory materials with varied alumina content (by controlling the raw materials with different ratios) at different sintering temperature were prepared using fly ash as the main raw material and coal gangue and industrial alumina as the auxiliary materials.The structural performance of the samples was tested;the microstructure was analyzed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques.The results show that the compactness, mechanical properties, refractoriness as well as crystalline structure of the prepared refractory material are affected by both sintering temperature and alumina content.Desirable performance of bulk density 2.47 g/cm3, compressive strength 41 MPa, refractoriness 1450 ℃, and mullite and corundum as crystalline state are observed for the sample prepared at sintering temperature of 1350 ℃ and alumina content of 45%.The application of fly ash in refractory material preparation is meaningful in producing high-value added products with it.
Keywords:fly ash  coal gangue  refractory material  
本文献已被 CNKI 等数据库收录!
点击此处可从《硅酸盐通报》浏览原始摘要信息
点击此处可从《硅酸盐通报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号