首页 | 官方网站   微博 | 高级检索  
     

7075铝合金在不同pH值NaCl溶液中的腐蚀行为
引用本文:杨少华,刘增威,林明,赵宇娟,李林山.7075铝合金在不同pH值NaCl溶液中的腐蚀行为[J].有色金属科学与工程,2017,8(4):7-11.
作者姓名:杨少华  刘增威  林明  赵宇娟  李林山
作者单位:江西理工大学冶金与化学工程学院, 江西 赣州 341000
基金项目:国家自然科学基金资助项目51664022
摘    要:用Tafel曲线和电化学阻抗谱(EIS)研究7075铝合金在不同pH值(pH=3、5、7、9、11) 的0.6 mol/L NaCl溶液中的腐蚀行为.结果表明,溶液pH值在3~7时,腐蚀电位正移,pH值在7~11时,腐蚀电位负移,pH值为11时腐蚀电位最负. pH值在3~11时,腐蚀速度呈现先降低后增大的过程,pH值为11时腐蚀速度最大,达到2.122 2 mm/a.在强酸溶液中,电化学阻抗谱中出现明显的感抗弧,表明存在不均匀点蚀现象. pH值为7和9时,电化学阻抗谱中只出现1个容抗弧,表明铝合金腐蚀属于金属基体溶解过程. pH值为11时,阻抗谱中出现2个容抗弧,表明铝合金腐蚀伴随铝合金的自溶解行为. 

关 键 词:7075铝合金    腐蚀速度    pH值    电化学
收稿时间:2016-12-16

Corrosion behavior of 7075 aluminum alloy in NaCl solutions with different pH values
Affiliation:School of Metallurgical and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
Abstract:Corrosion performance of 7075 aluminum alloy in 0.6 mol/L NaCl solutions with different pH values were investigated by Tafel curve and electrochemical impedance spectroscopy (EIS).The results reveal that corrosion potential shifts positively with pH value from 3 to 7, corrosion potential moves negatively with pH value from 7 to 11. The corrosion rate increases initially, and then decreases gradually with variation of pH value from3 to11.The corrosion rate is maximum when pH is 11, reaching 2.122 2 mm/a.The obvious inductance arc has arisen in strong acid solution, indicating discrete pitting corrosion.There is only one capacitive arc at pH 7 and 9, illustrating the corrosion is the dissolution process of metal substrate, but two at pH 11, illustrating that the corrosion is along with self-dissolution. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《有色金属科学与工程》浏览原始摘要信息
点击此处可从《有色金属科学与工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号