| 不同旋涂方式对铜锌锡硫硒薄膜及相应器件性能的影响 |
| |
| 引用本文： | 余纳,李秋莲,胡兴欢,刘信,赵永刚,陈玉飞,周志能,王书荣.不同旋涂方式对铜锌锡硫硒薄膜及相应器件性能的影响[J].硅酸盐通报,2023,42(1):302-309. |
| |
| 作者姓名： | 余纳 李秋莲 胡兴欢 刘信 赵永刚 陈玉飞 周志能 王书荣 |
| |
| 作者单位： | 1.云南师范大学云南省农村能源工程重点实验室,昆明 650500;2.云南师范大学云南省光电信息技术重点实验室,昆明 650500 |
| |
| 基金项目： | 国家自然科学基金(61941401,U1902218) |
| |
| 摘 要： | 晶体质量是决定铜锌锡硫硒(Cu2ZnSn(S,Se)4, CZTSSe)吸收层薄膜吸收效率的关键,旋涂是溶液法制备CZTSSe吸收层的第一步,因此旋涂方式的选择至关重要。为了探究不同旋涂方式对CZTSSe吸收层薄膜质量和相应器件性能的影响,分别采用三组不同的旋涂方式制备铜锌锡硫(Cu2ZnSnS4, CZTS)前驱体薄膜及CZTSSe吸收层薄膜,并利用X射线衍射仪(XRD)、能谱仪(EDS)、显微拉曼光谱仪(Raman)、场发射扫描电子显微镜(FE-SEM)分析了不同旋涂方式对所制备的CZTSSe吸收层薄膜晶体结构、元素成分、相纯度、表面形貌的影响。同时,采用电流密度-电压(J-V)测试和外量子效率(EQE)测试对CZTSSe吸收层薄膜太阳电池的光电特性进行了表征。结果表明:旋涂7周期,且第一周期烘烤之前旋涂2次的效果最好,所制备的CZTS前驱体薄膜均匀,无裂纹,CZTSSe吸收层薄膜结晶度更高,薄膜表面更平整致密,晶粒大小更均匀,实现了9.63%的光电转换效率。通过对采用不同旋涂方式制备的器件的性能参数进行统计分析,得出新的旋涂方式可以提高CZTSSe薄膜太阳电池的可重复性,为将来可能的大规模商业化应用做铺垫。
|
| 关 键 词： | Cu2ZnSn(S Se)4 薄膜太阳电池 旋涂方式 光电转换效率 溶液法 硒化处理 |
| 收稿时间： | 2022-09-04 |
Effects of Different Spin Coating Modes on Properties of Cu2ZnSn(S,Se)4 Thin Film and Corresponding Devices |
| |
| YU Na,LI Qiulian,HU Xinghuan,LIU Xin,ZHAO Yonggang,CHEN Yufei,ZHOU Zhineng,WANG Shurong.Effects of Different Spin Coating Modes on Properties of Cu2ZnSn(S,Se)4 Thin Film and Corresponding Devices[J].Bulletin of the Chinese Ceramic Society,2023,42(1):302-309. |
| |
| Authors: | YU Na LI Qiulian HU Xinghuan LIU Xin ZHAO Yonggang CHEN Yufei ZHOU Zhineng WANG Shurong |
| |
| Affiliation: | 1. Key Laboratory of Rural Energy Engineering in Yunnan, Yunnan Normal University, Kunming 650500, China;2. Yunnan Key Laboratory of Opto-electronic Information Technology, Yunnan Normal University, Kunming 650500, China |
| |
| Abstract: | The crystal quality is the key to determining the absorption efficiency of the copper-zinc-tin-sulfur-selenium (Cu2ZnSn(S,Se)4, CZTSSe) absorber layer thin film, and spin coating is the first step in the preparation of the CZTSSe absorber layer by solution method, therefore, the choice of the spin coating method is crucial. To explore the effects of different spin coating modes on the quality of CZTSSe absorber layer thin film and the performance of corresponding devices, three groups of copper-zinc-tin-sulfur (Cu2ZnSnS4, CZTS) precursor thin films were prepared by different spin coating modes and the effects of different spin coating modes on the crystal structure, element composition, phase purity and surface morphology of CZTSSe absorber layer thin films were analyzed by X-ray diffractometer (XRD), energy dispersive spectrometer (EDS), Renishaw Raman system (Raman), and field emission scanning electron microscope (FE-SEM), separately. At the same time, the photoelectric characteristics of the CZTSSe thin film solar cell were characterized by current density-voltage (J-V) characteristic and external quantum efficiency (EQE) tests. The results show that the spin coating mode with 7 cycles and 2 times spin coatings before each baking in the first cycle result in uniform CZTS precursor thin films without cracks, higher crystallinity of CZTSSe absorber layer thin films, flatter, and denser film surface, and more uniform grain size. As a result, the CZTSSe thin film solar cell with a photoelectric conversion efficiency of 9.63% is realized. Through the statistical analysis of the performance parameters of devices based on different spin coating modes, it concludes that the new spin coating modes can improve the repeatability of CZTSSe thin film solar cells and pave the way for possible large-scale commercial applications in the future. |
| |
| Keywords: | Cu2ZnSn(S Se)4 thin film solar cell spin coating mode photoelectric conversion efficiency solution method selenization |
|
| 点击此处可从《硅酸盐通报》浏览原始摘要信息 |
|
点击此处可从《硅酸盐通报》下载全文 |
|
