| 2219铝合金焊接接头晶间腐蚀行为 |
| |
| 引用本文： | 章淑芳,郝云飞,王晓敏,陈辉,廖潇垚,李明星.2219铝合金焊接接头晶间腐蚀行为[J].焊接学报,2017,38(4):22-26. |
| |
| 作者姓名： | 章淑芳 郝云飞 王晓敏 陈辉 廖潇垚 李明星 |
| |
| 作者单位： | 1.西南交通大学 四川省先进焊接及表面工程技术研究中心, 成都 610031;西南交通大学 生命科学与工程学院, 成都 610031 |
| |
| 基金项目： | 国家重点研发计划资助项目 |
| |
| 摘 要： | 采用晶间腐蚀试验及极化曲线测试方法对2219铝合金母材、搅拌摩擦焊（FSW）及钨极氩弧焊（TIG）接头的腐蚀行为进行分析，借助金相显微镜、激光共聚焦显微镜、体视显微镜、扫描电镜及能谱仪分析腐蚀形貌及腐蚀产物.结果表明，2219铝合金母材及焊接接头的腐蚀行为主要与析出相有关，Al2Cu的析出导致贫铜的无沉淀带作为阳极优先溶解.母材的抗晶间腐蚀能力最差，由表面点蚀开始，沿轧制方向逐渐发展为剥落腐蚀；TIG焊次之，表现为网状晶间腐蚀；FSW焊最低，焊核表现为点蚀，散落分布于表面.
|
| 关 键 词： | 2219铝合金 焊接接头 点蚀 晶间腐蚀 极化曲线 |
| 收稿时间： | 2015/4/11 0:00:00 |
Intergranular corrosion behavior of 2219 aluminum alloy's welding join |
| |
| ZHANG Shufang,HAO Yunfei,WANG Xiaomin,CHEN Hui,LIAO Xiaoyao and LI Mingxing.Intergranular corrosion behavior of 2219 aluminum alloy''s welding join[J].Transactions of The China Welding Institution,2017,38(4):22-26. |
| |
| Authors: | ZHANG Shufang HAO Yunfei WANG Xiaomin CHEN Hui LIAO Xiaoyao and LI Mingxing |
| |
| Affiliation: | 1.Research Center of Sichuan Advanced Welding and Surface Engineering, Southwest Jiaotong University, Chengdu 610031, China;School of Life Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China2.Capital Spaceflight Machinery Company, Beijing, 100076, China3.School of Life Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China4.Research Center of Sichuan Advanced Welding and Surface Engineering, Southwest Jiaotong University, Chengdu 610031, China |
| |
| Abstract: | The corrosion behavior of 2219 aluminum alloy and its welding joints (made by FSW and TIG welding) were investigated through intergranular corrosion test and polarization curve measurement. Metalloscope, laser scanning confocal microscope and scanning electron microscopy were employed to analyze the corrosion morphology, and corrosion products were measured by energy spectrometer. The results show that the corrosion behavior of 2219 aluminum alloy and its welding joints are related to precipitated phase, and the precipitation of Al2Cu phase leads to the dissolution of poor Cu zone as the anode. The base metal shows the worst corrosion resistance ability, whose pitting corrosion develops to exfoliation corrosion along the rolling direction in corrosion media (NaCl+H2O2). The corrosion resistance of FSW joint is superior to that of TIG joint. TIG joint shows intergranular corrosion with network cracks, and FSW joint shows corrosion pits distributing scatteringly on the surface. |
| |
| Keywords: | 2219 aluminum alloy welding joint pitting intergranular corrosion polarization curve |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
