The effect of fatigue pre‐cracking forces on fracture toughness |
| |
| Authors: | M Nowak‐Coventry H Pisarski P Moore |
| |
| Affiliation: | TWI Ltd, Great Abington, Cambridge, UK |
| |
| Abstract: | Testing procedures for the determination of the fracture toughness of a material by monotonic loading of fatigue pre‐cracked specimens are well established in standards such as BS 7448, BS EN ISO 15653, ISO 12135, ASTM E1820 and ASTM E1921. However, a review of these standards indicates a wide range of permitted fatigue pre‐cracking forces, whilst the underlying assumption in each standard is that the pre‐cracking conditions do not affect the fracture toughness determined. In order to establish the influence of different fatigue pre‐cracking forces on the fracture toughness, tests were carried out on specimens from an API 5L X70 pipeline steel. Single‐edge notch bend specimens of Bx2B geometry were notched through thickness and tested at temperatures of +20 °C, ?80 °C and ?140 °C to show the fracture behaviour in different regions of the fracture toughness ductile‐to‐brittle transition curve. Fatigue pre‐cracking was conducted on a high‐frequency resonance fatigue test machine over a range of pre‐cracking forces permissible within the various standards and beyond. The results showed that an excessively high pre‐cracking force can result in a significant overestimation of the value of fracture toughness for material exhibiting brittle behaviour, whilst very low fatigue pre‐cracking forces appeared to result in an increase in scatter of fracture toughness. A review of standards indicated that there was a possibility to misinterpret the intention of the ISO 12135 standard and potentially use excessively high pre‐cracking forces. Suggested clarifications to this standard have therefore been proposed to avoid the risk of overestimating fracture toughness. |
| |
| Keywords: | fatigue fracture toughness pre‐cracking standards testing |
|
|
