| 氯化物熔盐电解槽结构优化 |
| |
| 引用本文： | 杨钰,冯泰熙,叶祥,路贵民.氯化物熔盐电解槽结构优化[J].有色金属(冶炼部分),2023(12):24-31. |
| |
| 作者姓名： | 杨钰 冯泰熙 叶祥 路贵民 |
| |
| 作者单位： | 华东理工大学,华东理工大学,华东理工大学,华东理工大学 |
| |
| 基金项目： | 国家自然科学基金资助项目（U21A20323） |
| |
| 摘 要： | 以电热场为基础进行了氯化物熔盐电解槽结构优化，以热平衡为前提得出的电流强度与阴阳极间距、阴极插入深度、阳极半径、阴极半径、电解质液面高度五个因素之间的关系，利用二次回归正交设计的方法，设计了不同的氯化物熔盐电解槽结构参数组合，得出了电流强度与各结构参数之间的无因次方程，优化设计了电流效率最高、能耗最低的电解槽模型。
|
| 关 键 词： | 氯化物 熔盐电解 电解槽 结构优化 |
| 收稿时间： | 2023/6/24 0:00:00 |
| 修稿时间： | 2023/7/5 0:00:00 |
Structure Optimization of Chloride Molten Salt Electrolyzer |
| |
| YANG Yu,FENG Taixi,YE Xiang and LU Guimin.Structure Optimization of Chloride Molten Salt Electrolyzer[J].Nonferrous Metals(Extractive Metallurgy),2023(12):24-31. |
| |
| Authors: | YANG Yu FENG Taixi YE Xiang and LU Guimin |
| |
| Affiliation: | East China University of science and Technology,,,East China University of science and Technology |
| |
| Abstract: | The structure of chloride molten salt electrolyzer was optimized based on electricity and heat field. Based on thermal balance, the relationship between current intensity and distance between anode and cathode, depth of cathode insertion, radius of anode, radius of cathode and height of electrolyte surface was obtained. By using the method of quadratic regression orthogonal design, different structural parameter combinations of the chloride molten salt electrolyzer were designed. The dimensionless equation between current intensity and each structural parameter was obtained, and the electrolytic cell model with the highest current efficiency and the lowest energy consumption was optimized. |
| |
| Keywords: | chloride molten salt electrolysis electrolytic cell structural parameter optimization |
|
| 点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(冶炼部分)》下载全文 |
