| 基于钝圆尺寸效应的微细切削机理试验研究 |
| |
| 引用本文： | 赵孟,何宁,李亮.基于钝圆尺寸效应的微细切削机理试验研究[J].中国机械工程,2014,25(9):1214-1218. |
| |
| 作者姓名： | 赵孟 何宁 李亮 |
| |
| 作者单位： | 南京航空航天大学,南京,210016 |
| |
| 基金项目： | 国家自然科学基金资助项目(50935003);江苏省科技支撑计划资助项目(BE2012172) |
| |
| 摘 要： | 通过微细车削试验,研究了微细切削加工参数对切削力、表面质量、切屑形成的影响,发现切削厚度与刃口半径的比值是影响微细切削的关键因素,当该比值过小时,刃口尺寸效应作用极其显著,导致切削比能迅速增大,表面质量恶化,切屑形成困难。根据这一结论可确定微细切削加工参数选择的下限范围,从而为微细切削加工参数选择提供理论依据。
|
| 关 键 词： | 微细切削 尺寸效应 切削机理 表面质量 |
An Experimental Study of Tool Cutting Radius Size Effect in Micro Cutting Processes |
| |
| Zhao Meng,He Ning,Li Liang.An Experimental Study of Tool Cutting Radius Size Effect in Micro Cutting Processes[J].China Mechanical Engineering,2014,25(9):1214-1218. |
| |
| Authors: | Zhao Meng He Ning Li Liang |
| |
| Affiliation: | Nanjing University of Aeronautics and Astronautics,NanJing,210016 |
| |
| Abstract: | A micro cutting experiment was carried out to study how much the cutting edge radius size effect influence the cutting force, surface quality and chip formation. It is finded out when depth of cut is much less than tool cutting edge radius, the cutting edge radius size effect has a significant influence on micro cutting process, which results in rapid growth of specific cutting energy, bad surface quality and difficulties on chip formation. The experimental conclusions show the minimum cutting parameters of micro cutting and can be used as a guide of micro cutting parameter selection. |
| |
| Keywords: | micro cutting size effect cutting mechanism surface quality |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
|
