| 独山子背斜的几何学运动学数字模拟 |
| |
| 引用本文： | 陈伟, 郝晋进, 李世琴, 彭文利, 鲜地, 陈丽花, 李志刚. 独山子背斜的几何学运动学数字模拟[J]. 地质科学, 2012, 47(1): 37-50. |
| |
| 作者姓名： | 陈伟 郝晋进 李世琴 彭文利 鲜地 陈丽花 李志刚 |
| |
| 作者单位： | 1. 西南石油大学油气藏地质及开发工程国家重点实验室 成都 610500; 2. 西南石油大学资源与环境学院 成都 610500; 3. 中国石油天然气集团公司新疆油田分公司勘探开发研究院地球物理研究所 新疆乌鲁木齐 830011; 4. 中国石油天然气股份有限公司勘探开发研究院西北分院 兰州 730020 |
| |
| 摘 要： | 独山子背斜位于准噶尔盆地南缘西段,是北天山逆冲推覆带在前陆盆地山前形成的断层相关褶皱。本文以横跨背斜的过井地震剖面为蓝本,用钻井数据、相邻地震剖面和地表形态为约束,运用断层相关褶皱模型对独山子背斜进行几何学定量分析,以建立合理的与实际接近的构造模型; 提取构造特征参数进行基于Trishear模型的运动学定量模拟,选取与实际数据吻合度最高的构造形态为独山子背斜的最佳几何模型。模拟数据表明:独山子背斜为前翼呈三角剪切的断层传播褶皱; 背斜变形从喜马拉雅山晚期更新统(Q1-3)沉积期间开始形成并生长,平均推覆速率为0.18 mm/a; 全新统沉积期间(Q4)推覆活动强度达到最大值,平均推覆速率为 4.64 mm/a。形成独山子背斜所需的总推覆位移量为5 600 m左右,第四纪期间的平均推覆速率约为0.19 mm/a。
|
| 关 键 词： | 准噶尔盆地南缘 独山子背斜 Trishear 模型 断层传播褶皱 |
| 收稿时间： | 2011-04-18 |
| 修稿时间： | 2011-04-18; |
The geometric and kinematic numerical simulation of the Dushanzi anticline, southern Junggar Basin |
| |
| Chen Wei, Hao Jinjin, Li Shiqin, Peng Wenli, Xian Di, Chen Lihua, Li Zhigang. The geometric and kinematic numerical simulation of the Dushanzi anticline,southern Junggar Basin[J]. Chinese Journal of Geology, 2012, 47(1): 37-50. |
| |
| Authors: | Chen Wei Hao Jinjin Li Shiqin Peng Wenli Xian Di Chen Lihua Li Zhigang |
| |
| Affiliation: | 1. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500; 2. College of Resources and Environment, Southwest Petroleum University, Chengdu 610500; 3. Institute of Geophysics, Research Institute of Exploration and Development, Xinjiang Oilfield Company, PetroChina, Vrümqi, Xinjiang 830011; 4. Northwest Branch, Research Institute of Petroleum Exploration and Development, PetroChina, Lanzhou 730020 |
| |
| Abstract: | The Dushanzi anticline locats in the west segment of the southern margin of the Junggar Basin,it is a fault-related fold which developed by the thrusting of the northern Tianshan.Based on a seismic cross-section across the Dushen 1 well,we build the reasonable geometric model of the Dushanzi anticline by the well data and outcrop data.After extracting the structural geometric parameters of the Dushanzi anticline by several seismic profiles,a trishear model was selected to simulate the geometric deformation of the Dushanzi anticline quantitatively,and then we establish the optimal geometric shape to match the Dushanzi anticline.Our simulated results show that the Dushanzi anticline is a Trishear fault propagation fold,it developed in the Quaternary(Q1-3)in the late Himalayan with a average thrusting slip rate 0.18 mm/a,then the structural deformation reached to a maximum thrusting rate in the Holocene(Q4)with a slip rate 4.64 mm/a.The Dushanzi anticline has a total displacement slip more than 5 600 m,so it‘s average thrusting rate in the Quaternary is about 0.19 mm/a. |
| |
| Keywords: | The southern margin of the Junggar Basin The Dushanzi anticline Trishear modeling Fault propagation fold |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《地质科学》浏览原始摘要信息 |
|
点击此处可从《地质科学》下载免费的PDF全文 |
|
