首页 | 官方网站   微博 | 高级检索  
     

高级别船板钢炉外精炼过程洁净度研究
作者姓名:郝鑫  王新华  杨光维  秦颐鸣  赵和明
作者单位:1. 北京科技大学冶金与生态工程学院, 北京 100083;
摘    要:为了研究采用BOF-LF-RH-CC工艺生产的A32船板钢洁净度水平,进行了三炉工业实验.通过对冶炼过程系统取样分析,研究了钢中总氧、氮含量变化,夹杂物的转变规律及机理.结果表明:该工艺生产的船板钢有较高的洁净度,中包总氧控制在2×10-5以下,氮含量控制在4×10-5以下;LF精炼过程中,钢中总氧、夹杂物数量密度和平均尺寸均降低,夹杂物转变为CaO-MgO-Al2O3三元系;RH精炼过程中,钢中总氧和夹杂物数量密度降低,而夹杂物平均尺寸升高;钙处理过程中,夹杂物数量密度升高,而夹杂物平均尺寸降低,夹杂物转变为CaO-Al2O3-CaS三元系. 

关 键 词:炼钢    炉外精炼    钙处理    洁净度    夹杂物
收稿时间:2013-08-06

Cleanliness study of high level ship plate steel during secondary refining processes
Affiliation:1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. Xinyu Iron and Steel Co., Ltd., Xinyu 338001, China
Abstract:Three heats of industrial trials were performed to investigate the cleanliness of A32 ship plate steel produced by a BOF-LF-RH-CC route. The variation of T. O andN] contents as well as the transformation route and mechanism of inclusions in the steel were studied by system sampling during secondary refining processes. The steel have high level cleanliness with the T. O content under 2×10-5 and theN] content under 4×10-5 in tundish samples. The T. O content, number density and average size of inclusions decrease during the LF refining process, and the inclusions transform into a CaO-MgO-Al2O3 ternary system. In the RH refining process, the T. O content and the number density of inclusions decrease, but the average size of inclusions increases. During calcium treatment, the number density of inclusions increases but the average size of inclusions decreases, and the inclusions transform into a CaO-Al2O3-CaS ternary system. 
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《》浏览原始摘要信息
点击此处可从《》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号