集成高压平面开关的冲击片雷管设计研究

doi:10.3969/j.issn.1000-1093.2015.04.008

兵工学报 ›› 2015, Vol. 36 ›› Issue (4): 626-630.doi: 10.3969/j.issn.1000-1093.2015.04.008

集成高压平面开关的冲击片雷管设计研究

周密，同红海，任西，王寅，孟庆英，李明，闵杰

（陕西应用物理化学研究所，应用物理化学国家级重点实验室，陕西西安 710061）

收稿日期:2014-07-02 修回日期:2014-07-02 上线日期:2015-06-02
通讯作者: 周密 E-mail:mixueer2004@163.com
作者简介:周密（1984—），女，工程师
基金资助:
国防基础科研项目（JCKY2013208C002）

Design of Integrated High Voltage Planar Switch of Exploding Foil Initiators

ZHOU Mi, TONG Hong-hai, REN Xi, WANG Yin, MENG Qing-ying, LI Ming, MIN Jie

（National Key Laboratory of Applied Physics and Chemistry，Shaanxi Applied Physics and ChemistryResearch Institute, Xi’an 710061, Shaanxi, China)

Received:2014-07-02 Revised:2014-07-02 Online:2015-06-02
Contact: ZHOU Mi E-mail:mixueer2004@163.com

摘要/Abstract

摘要： 为了降低冲击片雷管系统体积和生产成本，设计一种在陶瓷基板的正面和背面分别制备爆炸桥箔和高压平面开关，与其他零部件组装成冲击片雷管的集成高压平面开关的冲击片雷管，并且研究了其电爆炸性能。结果表明：该冲击片雷管与使用火花隙开关的冲击片雷管放电参数基本相同，该高压平面开关能够代替火花隙开关完成冲击片雷管的起爆要求。

关键词: 兵器科学与技术, 高压平面开关, 小型化, 集成化, 冲击片雷管

Abstract: In order to decrease the volume and manufacturing cost of exploding foil initiator system, an exploding foil initiator (EFI) with high voltage planar switch is designed. The exploding foil and high voltage planar switch are prepared on the observational side and the reverse side of ceramic substrate, respectively. That substrate and other parts are assembled into an exploding foil initiator, and the electrical explosion performance of the exploding foil initiator is studied. The results indicates that the exploding foil initiator with high voltage planar switch had similar initiating performance as the traditional exploding foil initiator which uses a spark gap switch. The high voltage planar switch could meet the initiating requirement of exploding foil initiator instead of spark gap switch.

Key words: ordnance science and technology, high voltage planar switch, miniaturization, integration, exploding foil initiator

中图分类号:

TJ450.2

周密，同红海，任西，王寅，孟庆英，李明，闵杰. 集成高压平面开关的冲击片雷管设计研究[J]. 兵工学报, 2015, 36(4): 626-630.

ZHOU Mi, TONG Hong-hai, REN Xi, WANG Yin, MENG Qing-ying, LI Ming, MIN Jie. Design of Integrated High Voltage Planar Switch of Exploding Foil Initiators[J]. Acta Armamentarii, 2015, 36(4): 626-630.

参考文献

［1］吕军军,李明愉,曾庆轩，等.爆炸箔起爆器系统的发展[J].科技导报, 2011,29(36):61-65.
LYU Jun-jun, LI Ming-yu, ZENG Qing-xuan,et al. Development research of exploiding foil initiator system [J]. Science & Technology Review, 2011, 29(36):61-65. (in Chinese)
[2] 黄娜.冲击片雷管的参数优化及关键技术研究[D].南京:南京理工大学,2014.
HUANG Na. Research on parameters optimization and key technology of the slapper detonators [D]. Nanjing: Nanjing University of Science and Technology,2014. (in Chinese)
[3] 曾庆轩,郑志猛,李明愉，等.冲击片雷管集成制造方法研究[J].火工品,2011(5):1-3.
ZENG Qing-xuan, ZHENG Zhi-meng, LI Ming-yu, et al. Research on fabriation method of integrated slapper detonator[J]. Initiators & Pyrotecgics, 2011(5):1-3. (in Chinese)
[4] 周密,钱勇,刘燕,等.爆炸箔起爆器桥箔夹角优化设计[J].含能材料,2012,20(1):109-112.
ZHOU Mi, QIAN Yong, LIU Yan, et al. Optimal design of foil bridge included angle of exploding foil initiator[J].Chinese Journal of Energetic Materials, 2012,20(1):109-112. (in Chinese)
[5] 韩克华,任西,秦国圣，等.高压脉冲源输出特性[J].探测与控制学报,2012,34(4):24-29.
HAN Ke-hua, REN Xi, QIN Guo-sheng, et al. Output performance of high voltage pluse power source[J].Journal of Detetion & Control, 2012,34(4):24-29. (in Chinese)
[6] 薛朝妹,党瑞荣. 基于Rogowshi线圈的冲击片雷管检测[J].探测与控制学报, 2012,32(2)：27-30.
XUE Zhao-mei, DANG Rui-rong. Lossless detection method for electric explosive device based on roguish coils[J]. Journal of Detection & Control, 2012, 32(2)：27-30. (in Chinese)
[7] Tucker T J, Stanton P L. Electrical gurney energy: a new concept in modeling of energy transfer from electrically exploded conductors, SAND 75-0244[R]. New Mexico, US: Sandia National Laboratory, 1975.
[8] Keller D V, Penning J R Jr.Exploding foils-the production of plane shock waves and the acceleration of thin plates［M］∥Chace W G, Moore H K, ed. Exploding Wires 2.New York:Plenum Press,1962:263-277.

[1]	潘绪超，孙梦潇，何勇，沈杰，陈鸿，张江南. 聚能装药金属射流在天线中的应用研究[J]. 兵工学报, 2018, 39(8): 1457-1465.
[2]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[3]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[4]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[5]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[6]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[7]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[8]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[9]	陈浩玉，洪仁楷，陈永涛，张世文，任国武，莫俊杰. 用于微层裂物质诊断的小型动量探针技术[J]. 兵工学报, 2017, 38(9): 1729-1735.
[10]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[11]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[12]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[13]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[14]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[15]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.

集成高压平面开关的冲击片雷管设计研究

Design of Integrated High Voltage Planar Switch of Exploding Foil Initiators

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价