CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
LLM-105重结晶与性能研究
DOI:
作者:
作者单位:

作者简介:

李海波(1974-),男,助研,硕士,主要从事含能材料合成与性能研究。email: seawave99@sohu.com

通讯作者:

基金项目:


Recrystallization and properties of LLM-105
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    研究了LLM-105的重结晶方法。结果表明,不同重结晶方法获得的LLM-105平均粒径、纯度和撞击感度差别较大,其中冷却法和溶剂(DMSO)-非溶剂(热水)法结晶产品撞击感度较低,H50值分别为120.0cm和108.3cm。采用DSC?TG、VST、TG和热爆炸等方法研究了LLM-105的热性能,DSC放热起始温度为341.2℃(升温速率10℃.min-1),120℃条件下48h放气量为0.016mL.g-1,120℃条件下48h热失重为0.13%,5s延滞期爆发点为367.6℃;VST测试结果表明,LLM-105与HMX、AS、F2311、F2314、Estane的相容性良好。测定LLM-105爆速(LLM-105/F2314=95/5,1.845g.cm-3,96.4%TMD)为7991m.s-1。压力-密度测试结果表明,LLM-105具有良好的压缩成型性能。

    Abstract:

    The recrystallization of 2,6diamino3,5dinitropyrazine1oxide (LLM105) was studied. Results show that mean particle diameter, purity and impact sensitivity of LLM105 may be quite different by different crystallization methods. The products obtained by cooling crystallization and solvent (DMOS)nonsolvent(hot water) crystallization have low impact sensitivity, the value of H50 are 120.0 cm and 108.3 cm. Thermal properties of LLM105 were studied by DSCTG, VST, TG and thermal explosion test. Thermal properties parameters of LLM105 are shown respectively: DSC exothermic onset temperature is 341.2 ℃ (heating rate 10 ℃·min-1); VST: 0.016 mL·g-1/120 ℃/48 h; loss of weight: 0.13%/120 ℃/48 h; thermal explosion temperature for 5 s explosion delay is 367.5 ℃. The results of VST show that LLM105 has good compatibility with HMX, AS, F2311, F2314 and estane. Measured detonation velocity of LLM105 (LLM105/F2314=95/5, 1.845 g·cm-3, 96.4% TMD) is 7991 m·s-1. The experimental results of pressuredensity curve show that LLM105 has good pressingmolded property.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李海波,程碧波,刘世俊,等. LLM-105重结晶与性能研究[J].含能材料, 2008, 16(6):686-688.
LI Hai-bo. Recrystallization and properties of LLM-105[J]. Chinese Journal of Energetic Materials, 2008, 16(6):686-688.

复制
历史
  • 收稿日期: 2008-04-28
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2011-05-06
  • 出版日期: